Audiovox MS1400GFM, MS1400GFM User Manual

OWNER’S MANUAL

AND

INSTALLATION GUIDE

MS1400GFM

MARINE HIGH POWER AM/FM STEREO RADIO

Visit us at www.asaelectronics.com to see our full line of mobile audio and video products.

MADE IN CHINA

WITH COMPACT DISC PLAYER, AND WIRED

REMOTE CAPA B I L I T Y

I N S T A L L A T I O N

Preparation

Please read entire manual before installation. Before You Start

1.Disconnect negative battery terminal. (consult a qualified technician for instructions)

2.Avoid installing the unit where it would be subject to high temperatures, such as from direct sunlight, or where it would be subject to dust, dirt or excessive vibration.

Getting Started

1.Remove 2 transit screws located on top of the unit.

2.Insert the supplied keys into the slots as shown, and slide the unit out of the mounting sleeve.

3.Install mounting sleeve into dash opening, bending tabs to secure.

4.Some vehicles may require an installation kit and/or wiring harness adapter.(sold separately)

5.Ensure that the MS1400GFM is installed horizontally.

6.Attach speaker and power wires to the mating harness pigtails supplied with the MS1400GFM.

7.Carefully double check the wiring, then plug the pigtails into the radio harness, and the harness into the rear of the radio. Plug the antenna into the antenna connector.

8.Test for correct operation, then slide the MS1400GFM fully into the mounting sleeve.

WIRING DIAGRAM

CONTROL LOCATIONS

The MS1400GFM is designed to not require a constant voltage supply to maintain station memories or operational settings. Do not connect to a voltage source which is constantly hot to prevent draining the battery.

❶ Tune/Track Down ❷ Power ❸ Volume Up ❹ Mode ❺ LCD Display ❻ EQ ❼ Auto Store/Preset Scan

❽ Eject ❾ Mute ❿ Audio Selector 󱆌 Volume Down 󱆍 Tune/Track Up 󱆎 Band/Loudness 󱆏 Preset 1/CD Pause

󱆐 Preset 2/CD Scan 󱆑 Preset 3/CD Repeat 󱆒 Preset 4/CD Shuffle 󱆓 Preset 5 󱆔 Preset 6 󱆕 Reset

+ 5 hidden pages