Audiovox MMH56 User Manual

MMDV3

SLOT -IN DVD Player

Owner’s Manual

A . Welcome

Thank you for choosing the MMDV3 DVD Player. The MMDV3 is de­signed to optimize the enjoyment of your favorite DVDs in the mobile
environment. This DVD Player is constructed to provide years of reli­able, trouble-free service. Please read this manual thoroughly prior to
operating the player and retain it for future reference.

B. Precautions

EXPLANA TION OF GRAPHIC SYMBOLS

The lighting flash with arrowhead symbol, within an equilateral
triangle, is intended to alert the user to the presence of
uninsulated ‘dangerous voltage’ within the product’s enclosure
that may be of sufficient magnitude to constitute risk of electric
shock to persons.

The exclamation point within an equilateral triangle is intended
to alert the user to the presence of important operating and
maintenance (servicing) instructions in the literature accompa­nying the appliance.

WARNING

TO REDUCE THE RICK OF FIRE OR ELECTRIC SHOCK. DO NOT
EXPOSE THIS PRODUCTION TO RAIN OR MOISTURE.

1

SAFETY PRECAUTION

For safety reasons, when changing video media, it is recommended
that the vehicle is not in motion, and that you do not allow children to
unfasten seat-belts to change video media or make any adjustments to
the system. Enjoy your entertainment system but always remember
the safety of all passengers remains the number one priority.

IMPORTANT NOTICE

It is unlawful in most jurisdictions for a person to drive a motor vehicle
which is equipped with a television viewer or screen that is located in the
motor vehicle at any point forward of the back of the driver’s seat, or that
is visible, directly or indirectly, to the driver while operating the vehicle.
In the interest of safety, this system should never be installed where it
will be visible, directly or indirectly, by the operator of the motor vehicle.

1. OBJECT AND LIQUID

Do not push objects of any kind into the system through openings;
do not spill or spray liquid of any kind on or in the system (this may
result in a fire or electric shock). Do not place anything heavy on
the unit. To ensure proper ventilation and proper operation, never
cover or block the slots and openings with a cloth or other material.

2. DISASSEMBLE

Do not attempt to disassemble the cabinet. There is a risk of elec­tric shock and/or exposure to Laser Radiation. Contact qualified
service personnel if your system is in need of repair.

3. CLEANING UNIT

When cleaning, make sure the system is unplugged from the power
source. Do not use any solvents or cleaning materials (liquid, abra­sive or aerosol). Clean the DVD player using only a lightly damp-

ened lint free cloth to wipe the unit if it is dirty .

2

4. DISC

Do not use irregularly shaped discs such as heart or star-shaped
discs as they may cause the unit to malfunction. Do not stick paper,
tape or glue on the disc. Do not expose the disc to direct sunlight or
heat sources such as hot air ducts. Do not touch the surface of the
disc. Handle the disc by its edge. Clean the disc by wiping the disc
from the center out with a soft lint free cleaning cloth. Remove the
discfrom the unit and store it in its case after playing. Some playback
operations of discs may be intentionally fixed by software producers.
Since this unit plays discs according to the disc contents the soft­ware producers designed, some playback features may not be avail­able. Also refer to the instructions supplied with the discs.

5. Powering the DVD Player

This system MUST be powered from the type of switched (Acces­sory) power indicated on the marking label (i.e. not directly from the
car battery). Power should be applied to the unit when the ignition key
is in the Run and/or Accessory positions. Use only the supplied power
cable matching this set to avoid electric hazards.

6. Operation

When the temperature rises dramatically from a very low tempera­ture, moisture may condense inside the MMDV3 and cause the DVD
player to malfunction. If the MMDV3 does not operate properly under
these conditions, leave the MMDV3 turned on for about half an hour
until the moisture evaporates.

3

C. Contents

1. Main Unit

2. Remote control with one CR2025 Battery

3. Cigarette Lighter Adaptor Power Cable

4. T wo (2) Brackets with four (4) Screws

5. Owner's Manual

6. RCA Cables ( Red, Y ellow , and White)

D. Controls

Main Unit (Refer to Figure 1)

1. Power Button

2. Pause Button

3. Previous Button

4. Play Button

5. Next Button

6. Stop Button

7. Eject Button

8. Remote Control Sensor

9. S-Video Jack

10. Video Output Jack

1

1 1. Audio L Output Jack

12. Audio R Output Jack

13. Monitor Port 1

9

14. Monitor Port 2

15. DC 12V Jack

16. IR Input Jack

3

2

10 11 12 16 13

4

56

14

7

8

15

Figure1

4

E. Remote Control View (Refer to Figure 2)

1) Power Button

2)Display Button

3) Angle Button

4) Subtitle Button

5) Audio Button

6) Zoom Button

7) Up/Down/Left/Right /
Enter Buttons

8) Menu Button

9) Return Button

10) A-B Button

1 1) Forward Button

12) Reverse Button

13) Slow Button

14) Stop Button

15) Eject Button

16) Number Buttons

17) Setup Button

18) Repeat Button

19) Skip- Button (Previous)

20) Skip+ Button (Next)

21) Play Button

22) Pause Button Figure 2

5

F . Connections

REMOTE IR RECEIVER

MMH56B/T/G

S-VIDEO OUTPUT VI DEO

L AUDIO R

A/V OUTPUT

MONITOR1 MONITOR2

12VDC
INPUT

Figure 3

1. Powering Y our DVD Player ( Refer to Figure 3)
Insert one end of the power cable into the 12V DC IN jack on the
rear of the player . Plug the other end into the cigarette lighter.

2. Remote IR Receiver ( Refer to Figure 3)
Plug the 1/8” jack on the remote IR cable into the IR IN jack on the
rear of the DVD player. Place the IR receiver anywhere in the
vehicle to allow remote control in any location.

6

AUDIOVOX

DVRCA*

* Optional With the MMDV3

Figure 4

3. Connecting to an Audiovox Overhead Monitor

a. The MMDV3 can be connected to Audiovox Overhead
monitors by purchasing an adaptor ( Part Number DVRCA).
when using an Audiovox accessory cable (part number

8010730). Plug in the 3 RCA jacks, white (left audio) to
white, red (right audio) to red, and yellow (video) to yellow.
Connect the 2 pin IR jacks. Connect the 4 pin to the 2 pin
power adapter, 4 pin to the accessory cable and the plug into
the MMDV3 power jack.

4. Connecting to a Monitor

a. Match the color-coded plugs to the appropriate jacks on the

back of the DVD Player A/V OUTPUT jacks: Yellow (video) to
Y ellow , White (left audio) to White, and Red (right audio) to Red.

7

Figure 5

b. Connect any of the two monitor ports on the back of the DVD

player directly to the Movies T o Go headrest hoods Model MMH56
B/T/G . This is plug and play , power , audio, video and IR signals
are supplied in one DIN cable.

c. If your TV has an S Video input connector , connect the DVD

Player using the S-VIDEO connector . This connection will have
a better picture. Refer to the owner's manual supplied with the
TV to be used.

d. By purchasing an adapter (Part Number DVRCA ) the

monitor port can be connected to any monitor.

G . Playing a DVD

After connecting power to the unit, press the power button on the
main unit momentarily . The power light will increase in brightness.
Insert the disc into the slot on the front of the unit, the unit will load the
disc and start playing automatically; if there’s a disc inside the unit,
press the POWER button, the unit will start playing automatically .

8