Audiovox LCMR5RP User Manual

Rearview Mirror with 4.5" Color LCD with

Navigation and 2 Camera inputs

Model: LCMR5RP

Installation Manual

Features:

• Rearview Mirror with 4.5" LCD

• Rearview Camera Input

• Interior Camera Input

• Navigation Input

• NTSC

/PAL Camera Compatible

Cautions!

The product is intended to assist in safe driving and to allow the driver to
have a broader rearview while the vehicle is in reverse. You, as the driver,
are solely responsible for the safe operation of your vehicle and the safety
of your passengers according to the country and their local traffic
regulations. Do not use any features of this system to the extent it distracts
you from safe driving. Your first priority while driving should always be
the safe operation of your vehicle. Audiovox Electronics Corporation
cannot accept any responsibility whatsoever for accidents resulting from
failure to observe these precautions or safety instructions.

1. This product utilizes high voltage. Any unauthorized modifications
or damage to the products may result in electrical shock. Handle
all components with care. Inspect regularly for damage to
components and cabling.

2. You shall be responsible to ensure that the installation of this
product does not void or affect the vehicle manufacturer’s
warranty. Audiovox Electronics Corporation, or its branches are
not liable in full or in part for improper installation resulting in
loss or damage to your property, or for voiding all or part of the
vehicle manufacturer’s warranty.

3. Do not apply excessive force to any of the components contained
within this kit. Excessive force used before, during or after
installation that results in a damaged or non-functional part shall
void all warranties.

4. Please follow the procedure from this installation manual.
Improper installation or modification of this product shall void all
warranties.

1

TABLE OF CONTENTS

Cautions! 1

Preface 3

WARNING 3

Packing list 3

1.Installation Instructions 4

2.Signal Inputs 5

3.Controls and Indicators 7

Specifications 9

Maintenance 10

Troubleshooting 11

Illustration of connections 12

2

Preface

This replacement mirror /monitor can display up to 3 different video

inputs. The inputs are Navigation, Rear observation camera and Interior

observation camera.

Not all rearview mirrors attach to the vehicle with the same style mount.

Please consult the application guide for the appropriate mounting bracket

for your vehicle or call Tech Service at 800-225-6074.

There is a blind spot that exists at the back of a vehicle while the vehicle is

in reverse. Equipped with a camera, this electronic rearview mirror

ensures safety by providing the driver with a clear and wide image of the

area behind the vehicle while it is in reverse.

WARNING:
Backing up vehicle

Do not back up the vehicle while watching the mirror/monitor screen.

Always look in the direction of vehicle motion. Use the mirror/monitor as

an aid in safety confirmation. The distance looks different in the monitor.

Packing list

The Rear view mirror Model LCMR5RP consists of the following items:

1. Rear View Mirror-1

2. Camera Cable-2

3. Control Box-1

4. Control Box Monitor Cable -1

3

1. Installation Instructions

(1) Mount the mirror/monitor

a) Remove the original factory mirror. (Do not use excessive force when

removing factory mirror.) Check to make sure that the factory mirror mount you

remove matches the mirror mount on the replacement mirror. If it does not

match, consult the application guide or call Technical Service at 800-225-6074.

b) Slide the receiving bracket on the back of the new mirror stalk onto the

windshield mounting button. Move the bracket back and forth until completely

seated.

c) Tightly the T-20 mounting bracket screw.

(2) Navigation monitor connection: Insert the connector from the navigation

monitor cable into the receptacle at the backside of the mirror/monitor. Route the rest

of the monitor cable under the headliner, down the A pillar to the Navigation

computer.

(3) Control box connection:

mirror/monitor 8 pin cable. Route the cable under the headliner of the windshield then

down the A pillar behind the plastic shroud to the under dash area. Connect the 8-pin

cable to the control box 8 pin connector.

Connect the 8-pin extension cable to the rearview

4