Audiovox LCM640TV, LCM1700TV User Manual

FCC Compliance Statement

Note :

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment dose cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

- Consult the dealer or an experienced radio /television technician for help.

Notice 1 :

The changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Notice 2 :

Shielded interface cables, if any, must be used in order to comply with the emission limits.

DOC CLASS B NOTICE

This digital apparatus does not exceed Class limits for radio noise emission for a digital apparatus as set out in the Radio Interference Regulations of the Canadian Department of Communications.

INSTRUCTION MAIN FEATURE 2 FRONT/BACK OF MONITOR 2,3 FUNCTION 3

INST ALLING COMPONENTS 4 PRECAUTIONS IN INSTALLING 4 CONNECTING TO YOUR PC For 15" Only 5 CONNECTING TO YOUR PC For 17" Only

TV/VIDEO FUNCTION SETTING PICTURE CONTROL 7 SOUND CONTROL 8 INSTALL 9 OSD 10

TELETEXT FUNCTION TELETEXT (OPTION) 11,12

PC FUNCTION SETTING OSD CONTROL 13 CONTRAST / BRIGHTNESS /ADJUST CONTROL 14,15

OTHERS POWER SAVING MODE(S) 16 STANDARD SIGNAL TIME CHART 17 PRECAUTIONS 18 TROUBLE SHOOTING 19 REMOTE CONTROL 20 SPECIFICATIONS For 15" Only SPECIFICATIONS For 17" Only

21 22

BACK OF MONITOR

Ventilator(Caution! ) Do not block the ventilator

Hole for wall hanging

Detachable Base Detachable for other equipments (VESA ARM) and wall hanging use.

Connector to External Functions Connects signals with external equipments and PCs. (TV/VIDEO

)

MAIN FEATURES

LCD Panel

Control Button

Select

Power Switch

Uesd in turning on/off the screen. The power light shows regular and safe mode functions with colors.

Speaker

Detachable Base

Thank you for purchasing our high resolution TFT LCD monitor. We recommend that you thoroughly read through this user's guide

before using the product. It is also recommended to safely store the guide in times of immediate need in the course of using the product.

FRONT OF MONITOR

FUNCTIONS

Although regular monitors for PCs use CDT as a medium for display, the TFT LCD monitor is a Flat Panel Display based on digital technology, and was originally used only for laptops PCs. Now it is used for desktops and laptops alike, opening a world of conveniences and quality to those ardent PC users.

The following functions are provided in our products.

1. Convenient and easy to handle Control Button.

2. From PC function to TV/VIDEO functions.

3. Remote Control.

4. A slim and space reducing monitor.

5. Monitor transferable for wall hanging.

6. Industrial robot and VESA install able.

7. Liberal angle control.(+30

8. Low energy consumption.

9. Scarcely influences surrounding objects, with no harmful electronic waves, noise, heat or magnetic activities.

~ -5 )

12V DC S-VHS ( Y Pb pr )

VIDEO

L R

AUDIO

H-

PHONE

S/T- IN ANTENNA

Connect to 100V~240V capacity outlets. (Free Voltage)

COMPONENTS

After discarding the package and wrapping of the LCD TV,

check for the following components in the box.

Components

LCD TV Power Adapter User s Guide Signal Cable Power Cable Audio Cable Remote Controller

Battery (AA) 1.5V x 2

CONNECTING TO YOUR PC for 15" Only

12V DC Jack PC 15 pin Jack S-VHS Jack Terminal Cable Y (Composite or Component) Terminal Cable Pb (Component) Teminal Cable Pr (Component) Audio Cable L . R Head Phone Jack PC Audio Jack TV Antenna Jack

PRECAUTIONS IN INSTALLING

Install on safe ground. : There's a possibility of damage of the product or harming people.

Always cover the product or keep in a well ventilated place. : There is danger of fire and also for safe maintenance.

Do not put anything containing water, medicine, small metal material, or heavy objects on the product. : Danger of fire, electrocution, and damage to the product.

Do not expose the product to direct sun light. : The screen will not maintain clarity and may cause damage to the eye.

Do not install in damp, dusty, or wet places. : Danger of fire and electrocution.

Do not put candles, cigarettes, or other objects with excessive heat. : Danger of fire.

Do not install any external connections, only connecting cords and adapter included in the box. : Damage and fire may occur.

1. Connect to 12V DC with the adapter included in the box to 100V~240V outlet.

2. Connect signal cable to PC. "Check Signal Cable"will appear on the monitor if improperly connected. In case of using Macintosh, use the exclusive adapter.

3. Connect to S-VHS Terminal of VCR, DVD,Camcorder.(optional)

4. Connect to Terminal of composite or Y-Terminal of component.

5. Connect to Pb-Terminal of component.

6. Connect to Pr-Terminal of component.

7.Connect to input terminals L, R that need Audio output.(DVD, VCR or CAMCORDER)

8. Connect headphones to the connecting terminal.

9. Connect to PC Audio output.

10 . Connect to antenna or CATV connecting cable to the 'Antenna' terminal.

+ 9 hidden pages