Audiovox LCM0802TV User Manual

LCM0802TV

Owner’s Manual

Audiovox Specialized Applications, LLC

23319 Cooper Dr.

Elkhart, IN 46514

1-800-688-3135

www.asaelectronics.com

US PATENT # D413, 856

Important Notice

It is unlawful in most jurisdictions for a person to drive a motor vehicle which is equipped with a television viewer or screen that is located in the motor vehicle at any point forward of the back of the driver’s seat, or that is visible, directly or indirectly, to the driver while operating the vehicle. In the interest of safety, the LCM0802TV should never be installed where it will be visible, directly or indirectly, by the operator of the motor vehicle.

Please note that the state of Rhode Island forbids the installation of such a device in a motor vehicle.

-2-

Television Reception

This entertainment system is designed primarily for viewing pre-recorded movies or playing video games. Television reception in a moving vehicle will be limited and in some areas will not be possible due to weak and variable signal strength. Television viewing in a stationary vehicle will result in an improvement, but may still be marginal due to strength. The quality of the picture will not be consistent with home TV reception. Reception may be affected by the weather and distance from the TV station. A weak signal may cause the picture to roll, be snowy, or cause some color loss.

Congratulations on your purchase of the Flexvision LCM0802TV drop down TV/Video monitor. The LCM0802TV has been designed to give you and your family many years of video entertainment in the mobile environment. Please read the directions that follow to familiarize yourself with the product and to ensure that you obtain the best results from your equipment.

Please note: Installation options vary, see the

individual owner’s manuals for each component in your system to obtain a full understanding of each component’s operation.

Safety Precaution

For safety reasons, when changing video tapes it is recommended that the vehicle is not in motion, and that you do not allow children to unfasten seat belts to change tapes or make adjustments to the system. System adjustments can be accomplished using the remote control unit, while seat belts remain fastened. Enjoy your Flexvision entertainment system but remember- safety of all passengers remains the number one priority.

-3-

FEATURES

• 8” TFT (Thin Film Transistor) Active Matrix LCD (Liquid Crystal Display) Monitor

• OSD (On Screen Display) for control of Picture Quality and Functions

• Full Function Remote Control

• Television Tuner

• Plug in RF Transmitter for wireless RF Headphones

• Remote Sensor eye

• Three Audio / Video Sources

• Speaker Amplifier

• Back-lit Controls for Low Light Operation

FRONT PANEL FEATURE

Figure 1

1234 567 8

-4-

FRONT PANEL FEATURES – See Figure 1

1. Sensor Eye – Allows the remote control to operate

the LCM0802TV’s OSD system (On Screen Display), volume to wired headphone jacks (and optional external speakers), and for control of Video Cassette Player and other accessories.

2. Power Button – (Bright red when system is ON, dim

when system is OFF).

3. Volume Up/Down – Controls volume to headphone

jacks and external speakers if connected.

4. Picture Select – Each time this button is pressed, the

screen picture adjustment display cycles through “adjustment bars” for CONTRAST, BRIGHTNESS, COLOR, and TINT. Once the desired adjustment bar is displayed, use the VOLUME UP/DOWN buttons to adjust the setting. The display will automatically turn off if no adjustments are made within 6 seconds, or if any other button is depressed.

5. Select – Used to select on of the three A/V sources.

6. Channel Up/Down – Changes the TV channel.

7. Auto Pro Switch – Auto Program used to program

local channels into TV memory. Press when vehicle is in a new location.

8. Dome Lights – Provide additional illumination.

9. Three position Dome Light Switch

• Auto – Automatically switched on the dome lights in conjunction with the vehicle’s interior illumination.

• Off – The Dome lights will not turn on in this position.

• On – Turns on the Dome lights.

10. Screen release – Slides in the direction of the

arrow to release the drop down screen.

-5-

REMOTE CONTROL OPERATION

BATTERY INSTALLATION

Before attempting to operate your Remote Control, install the batteries as described below.

1) Turn the remote control face down. Press down on the ridged area of the battery cover, and slide it off.

2) Install two “AAA” batteries as shown. Make sure that proper polarity (+ or -) is observed.

3) Slide the cover back until it clicks into position.

The remote control will operate the LCM0802TV, Flexvision Televisions and Video Cassette Players. It is not a universal remote control and will not control equipment from other manufacturers.

If a universal remote control is used with the LCM0802TV, choose the remote control encoding scheme for Action Televisions when programming the remote.

-6-

+ 11 hidden pages