INTRODUCTION
Congratulations on your purchase of the IPD-SBBT Sound Bar. The IPD-SBBT Sound Bar
has Bluetooth® capability.
Please read the instruction manual for this product before using. The documentation
provided will allow you to fully enjoy all the features this unit has to oer. Please save
this manual for future reference.
Bluetooth® is a trade mark of Bluetooth Special Interest Group (SIG) In
WARNING! Never install this unit where operation and viewing could interfere with safe
driving conditions.
WARNING! Never disassemble the unit.
WARNING! To prevent injury from shock or re, never expose this unit to moisture or
water.
c.
2
Package Includes:
Sound Bar IPD-SSBT Sound Bar Bracket
Mini USB charging Cable Owner’s Manual 3.5 mm AUX-IN Cable
3
IPD-SBBT FRONT VIEW
1
3
2
6 5 4
1. Previous and Volume Decrease ( ) Button:
Press the previous button to listen to the previous song on your Bluetooth® device. Press and
hold the previous button to decrease the volume.
2. Stop ( ) and Play
a) Bluetooth Audio
Press the button to stop playback. Press the button again to resume playback.
b) Bluetooth Phone
Press the stop button to end a call. Press the play button to answer a call.
3. Next ( ) and Volume Increase Button:
Press the next button to listen to the next song. Press and hold the next button to increase the
volume.
4. Blue LED
When the Sound Bar is turned on the LED will blink rapidly. When call is being received the
LED will blink rapidly. The LED will blink approximately every ve seconds when the Sound
Bar is not paired to a Bluetoooth® device. When the LED is ON the Sound Bar is connected to a
Bluetooth® device.
5. Red LED
When the LED is ON the battery charge is low.
6. Yellow LED
When the LED is ON the battery is being charged. When the LED is OFF the battery is fully
charged.
Button:
4