
Navigation Interface Operation:
GM Vehicles:
To change the OEM radio to Navigation Mode:
• Press on an open area on the screen for 3 seconds.
• Press the Nav switch if installed
• Press the SWC Nav switch for 3 or more seconds if installed.
Exit Navigation by:
• Pressing again on an open area of the screen for 3 seconds.
• Press the Nav switch.
• Press the SWC Nav switch for 3 or more seconds if installed

NAVIGATION QUICK START GUIDE
Follow these easy steps and you are on your way.
NOTE: Full Navigation Manuals are available for download at www.adventproducts.com
Step 1 - Start Up
After the iGo primo software starts, you will see the reminder warning to use your
iGo Primo software safely and lawfully.
Navigation Disclaimer Screen
Step 2 - Access the Main Menu
Touch to access the Navigation Menu:
Navigation Main Menu
1