Audiovox GC-600 User Manual
OWNER'S MANUALOWNER'S MANUAL
OWNER'S MANUAL
OWNER'S MANUALOWNER'S MANUAL
ELECTRONICALLY-TUNED
AM/FM/MPX RADIO WITH
AUTO-REVERSE CASSETTE PLAYER,
CD PLAYER, CD CHANGER CONTROLS
AND QUARTZ CLOCK
Model GC-600
OPERATING INSTRUCTIONS
12
bs
bu
dl
cl
bo
bp
b r
bq
9
d r
ct
bt
dm
co
cu
cs
4
5
3
6
7
cp
8
dtcqds cr do dn
du
cn bm
cmbl dpdq
bn
1 ON/OFF POWER BUTTON
Press this knob to turn the unit on or off.
2 VOLUME CONTROL
To increase the volume level, turn this knob clockwise. The volume will increase
with each detent position of the control and the level will be shown by the bars
on the display panel. To decrease the volume level, turn the knob counterclockwise.
3 AUDIO FUNCTION SELECT (SEL)
AUDIO FUNCTION LEVEL CONTROL
VOLUME LEVEL MEMORY
This knob is used to select the audio function (bass, midrange, treble, balance,
or fade) to be adjusted.
Pressing the Select knob will select the audio functions in sequence of bass
(“BAS” on the display panel), midrange (“MID”), treble (“TRE”), balance (“BAL”),
and fader (“FAD”). After selecting the desired audio function, adjustment is
made by turning the knob as appropriate. The display will automatically return
to the volume indication 5 seconds after the last adjustment is made.
This knob is also used to set the memory for the volume level which will be
recalled when the unit is turned on. To set the volume memory, turn the unit on
and adjust the volume using the Volume Control 2 to the level which you wish
to be recalled when the unit is turned on. Then, press the Select knob and hold
it for approximately 2 seconds. The volume level bars on the display panel will
flash twice and the volume is now set in the memory. If the unit is turned off with
-1-
the volume higher than the memory setting, the unit will return to the memory
setting when turned back on. If, however, the unit is turned off with the volume
lower than the memory setting, the unit will return to the lower setting when
turned back on.
4 BASS CONTROL
To adjust the bass level, first select the Bass mode by pressing the Select knob
3 once so that the “BAS” indication appears on the display panel. Within 5
seconds of choosing the Bass mode, turn the knob clockwise to increase the
bass response or counter-clockwise to decrease the bass response as desired.
The level will be shown by the bars on the display panel from a minimum of
to a maximum of (the diamond in the
--
--
center of the display represents flat response). The display will automatically
return to the volume indication 5 seconds after the last adjustment is made.
----
5 MIDRANGE CONTROL
To adjust the midrange level, first select the Midrange mode by pressing the
Select knob 3 twice so that the “MID” indication appears on the display panel.
Within 5 seconds of choosing the Midrange mode, turn the knob clockwise to
increase the midrange response orcounter-clockwiseto decrease the midrange
response as desired. The level will be shown by the bars on the display panel
from a minimum of to a maximum of (the
diamond in the center of the display represents flat response). The display will
automatically return to the volume indication 5 seconds after the last adjustment
is made.
-
---
---
-
6 TREBLE CONTROL
To adjust the treble level, first select the Treble mode by pressing the Select
knob 3 three times so that the “TRE” indication appears on the display panel.
Within 5 seconds of choosing the Treble mode, turn the knob clockwise to
increase the treble response or counter-clockwise to decrease the treble
response as desired. The level will be shown by the bars on the display
panel from a minimum of to a maximum of
( the diamond in the center of the display represents flat
response). The display will automatically return to the volume indication 5
seconds after the last adjustment is made.
----
--
--
7 LEFT/RIGHT BALANCE CONTROL
To adjust the left-right speaker balance, first select the Balance mode by
pressing the Select knob 3 four times so the “BAL” indication appears on the
display panel. Within 5 seconds of choosing the Balance mode, turn the knob
clockwise to adjust the stereo balance to the right channel speakers or counterclockwise to adjust it to the left channel speakers. The balance position will be
shown by the bars on the display panel from L R (full left)
to L R (full right). When the volume level between the left
and right speakers is equal, L R will be shown on the display
panel. The display will automatically return to the volume indication 5 seconds
after the last adjustment is made.
--
--
-2-
---
-
8 FRONT/REAR FADER CONTROL
To adjust the front-rear speaker balance, first select the Fader mode by pressing the
Select knob
5 seconds of choosing the Fader mode, turn the knob clockwise to fade the sound to
the rear speakers or counter-clockwise to fade the sound to the front speakers. The
fader position will be shown by the bars on the display panel from
F R ( full front ) to F R ( full rear ). When
---
the volume level between the front and rear speakers is equal,
F R will be shown on the display panel. The display will automatically return to the volume indication 5 seconds after the last adjustment is
made.
3 fivetimesso the “FAD” indication appears on the display panel. Within
-
-
---
9 AM/FM BAND SELECTOR
Each time this button is pressed, the radio band is changed. The indication “AM”,
“FM1”, or “FM2” will appear on the display panel according to your selection.
bl MANUAL UP/DOWN TUNING ( TUNE )
AUTOMATIC SEEK TUNING
To manually select a radio station, momentarily press the Up Tuning ( ) side
of the button to advance the unit one digit higher or the Down Tuning ( ) side
of the button to tune downward. Continue to press either side of the button to
tune the radio rapidly in the selected direction.
Pressing either side of the button for longer than 0.5 seconds and then releasing
will activate the Automatic Seek Tuning function in the selected direction. The
radio will seek the next available station and stop at that frequency. The Seek
function can be stopped by pressing the button again or activating any other
tuning function.
bm AUTO-STORE SYSTEM (AS)
PRE-SET SCAN TUNING (PS)
Press this button momentarily to scan the 5 stations pre-set into the memories
of the AM band or the 10 stations of the FM band. The unit will stop at each preset station for 5 seconds before continuing to the next pre-set station (the preset number on the display panel will flash during this operation). Press the button
again momentarily to stop the Pre-Set Scan operation and remain on the
selected frequency.
Pressing the button for longer than 2 seconds will activate the Auto-Store
System (AS) which will automatically scan and enter up to 5 stations into the preset memories on the band in use. If you have already set the pre-set memories
to your favorite stations, activating the Auto-Store function will erase those
stations and enter the new ones. This feature is most useful when travelling in
a new area where you are not familiar with the local stations.
bn STATIONPRE-SET MEMORIES
To set any of the 5 pre-set memories in each band, use the following procedure:
1. Turn the radio on and select the desired band.
2. Select the first station to be pre-set using the Manual Up/Down or Automatic
Seek Tuning Controls bl .
-3-
Loading...