Audiovox G2 Cradles Installation Manual & User Manual

Installation Guide/User manual
G2 Cradles
for iPod and iPhone
OMA-DCR-012012_rev012012.indd 1 1/21/2012 4:19:44 PM
2
Copyrights and Trademarks
Copyright 2012 Audiovox Electronics Corporation
iPod and iPhone are trademarks of Apple, Inc.
All Trademarks and Logos are the property of their respective owners.
All rights reserved.
Printed in the U.S.A.
OMA-DCR-012012_rev012012.indd 2 1/21/2012 4:19:44 PM
3
Warning and safety
Product registration
Comparing G2 cradles
Compatible iPod/iPhone models
Mounting option
Choose the correct holder
Installation
Long base installation
Adjusting the angle
A-DCR-50-PTH/A-DCR-300-CHG cradles
Contents
Connecting the cradle
A-DCR-150-USB cradle
Contents
Connecting the cradle
..........................................................4
.........................................................6
.....................................................7
......................................8
...............................................................9
..............................................10
......................................................................11
....................................................12
........................................................13
........................................................................15
....................................................16
........................................................................18
....................................................19
Table of Contents
A-DCR-200-AVO cradles
Contents
Connecting the cradle
Connecting to the rear seat entertainment system
What is iPod Out?
Wireless remote functions
Optional mounting base
Warranty
........................................................................21
....................................................22
........23
..........................................................24
.............................................25
.................................................26
........................................................................27
OMA-DCR-012012_rev012012.indd 3 1/21/2012 4:19:44 PM
4
Please read these instructions carefully before proceeding. Failure to follow instructions may result in
improper operation or injury. Neither Audiovox Electronics Corporation nor Apple Inc., its regional ofces,
distributors or resellers take any responsibility for any damage or injury as a result of using the integration kit.
- Do not open, disassemble or alter the product in any way.
- Do not insert anything into the casing.
- Do not cut or try to alter cables in any way and always use the correct connections.
- Only operate unit when stationary or ask passengers to operate it for you.
- Do not allow the Apple iPod/iPhone to distract you from driving.
- Exercise good judgement and keep your eyes on the road at all times.
- Do not expose unit to extreme temperatures, humidity or shock.
- Keep the unit and iPod/iPhone away from uids.
- Keep away from children! - Interface components may contain small parts, can be broken or disassembled and components may become loose from vibration and heat. Small components and packaging materials may be a choking hazard when handled by children.
Warning and safety!
OMA-DCR-012012_rev012012.indd 4 1/21/2012 4:19:44 PM
5
You, the installer / the end user, agree not to install or connect the G2 cradle in a manner that would enable the driver of the vehicle to watch any video, movie or any kind of motion picture. Such installation and use is illegal and against the law!
Be a responsible driver, and never be distracted from driving! The G2 cradle does not have any mechanism to prevent driver distraction, you hereby agree to be responsible when using a device attached to the G2 cradle, and use it at your own risk. The use of this product constitutes your understanding and agreement that you are solely responsible for any damage, or liability that may arise from use of this product, and you hereby indemnify the manufacturer of this product from any liability.
Installation warning
OMA-DCR-012012_rev012012.indd 5 1/21/2012 4:19:44 PM
6
Thank you for purchasing the G2 cradle. Please review our user manual and installation guide before operating the unit.
In order to validate your warranty period and to receive telephone or online support, you MUST register your Audiovox product.
To register your Audiovox product, please complete the following steps:
1. Visit http://www.audiovoxproducts.com
2. Look up and save the serial number of the product.
3. Complete the product registration form.
4. Submit the form.
5. Save the registration sheet in a safe place for future reference.
If you are unable to complete the registration via internet, please call Audiovox at 1-800-645-4994.
Congratulations on your purchase!
Product registration
OMA-DCR-012012_rev012012.indd 6 1/21/2012 4:19:44 PM
7
A-DCR-50-PTH is a mounting solution compatible with the Silverline DUO and the Universal 150 kits sold by Audiovox, as well as with many 3rd party connectivity kits that have a 30 pin dock connector.
A-DCR-150-USB is a mounting solution compatible with the MediaBridge and the Universal 200 kits sold by Audiovox, as well as with many 3rd party connectivity kits that have a USB port connector.
A-DCR-200-AVO is a standalone mounting solution designed to enable iPod Out feature for rear seat entertainment applications. This cannot be used in conjunction with any connectivity kit.
A-DCR-300-CHG is a 12V to 5V charge converter and mounting solution compatible with legacy 3rd party connectivity kits that have a 30 pin dock connector and supplied 12V charge power.
G2 cradles are designed to securely hold your device without the use of protective cases or skins. You may be able to use a larger holder to accommodate certain cases, however the majority of the cases prevent proper seating of the dock connector thereby leading to unreliable operation.
Comparing G2 cradles
OMA-DCR-012012_rev012012.indd 7 1/21/2012 4:19:44 PM
8
Compatible iPod and iPhone models
4/4S
OMA-DCR-012012_rev012012.indd 8 1/21/2012 4:19:45 PM
9
Mounting option
These holes are designed to allow you to screw the cradle base to AMPS standard mounts (ProClipTM, KudaTM, etc).
These holes are designed to t vehicle mounts from iGripTM.
Use the screws (x4) in the package to screw the cradle to AMPS standard mounts.
OMA-DCR-012012_rev012012.indd 9 1/21/2012 4:19:45 PM
Loading...
+ 19 hidden pages