It is one of the most sophisticated and reliable two way
family radios available.
BEFORE OPERA TING YOUR FR-1500XTM (FAMIL Y RADIO)
READ THIS MANUAL CAREFULLY
2
FEATURES
Your FR-1500XTM Family Radio is a portable, easy to use, two-way radio that
you can carry almost anywhere. It is skillfully constructed to give you reliable
communications for many different applications. The FR-1500XTM is ideal for use
around the house, in your boat, on hunting and camping trips, on the ski slopes or
at the mall. Some of the FR-1500XTM features are:
• No Air Time Fees and No License Required
• Up to 2 Mile Range
• Battery Saver and Auto Squelch
• National Oceanic and Atmospheric Administration (NOAA)
• 14 Family Radio Service Channels
• 38 Continuous T one Coded Squelch System (CTCSS)
• Multifunction LCD Display
• Roger Beep and Call / Ring Button
• FM Radio with Tune/Seek and Preset Functions
• Built-In Compass
• Time-of-Day Readout
• T emperature Readout in Degrees
Fahrenheit and Centigrade
• Stopwatch Function
• Setup Menu for Personalizing Unit
Functions
• Vibrating Call Function
F
3
2
1
1 (REF)
34
5
6
17
16
15
14
13
1. Antenna
2. Function (F) Select/Key Lock
Button
3. External Microphone/Speaker
Jack
4. Transmit (Red) LED
5. Liquid Crystal Display (LCD)
6. Up Control /Volume Increase
Button
7. Power On/Off Button
8. Battery Charging Connector
12
TOP
7
8
F
9
10
BOTTOM
11
9. Battery Compartment Door
10. Menu Scroll Buttons (Forward/Back)
11. Down Control/Volume Decrease
Button
12. Battery Compartment Cover
Latch
13. Built-in Speaker
14. Monitor (M) Button
15. Belt Clip Stud
16. Push-T o-Talk (PTT) Button
17. Built-In Microphone
4
MODEL FR-1500XTM DISPLAY
1
2345
6
11
10
1.Voice Activated Transmission (VOX) Indicator: Blinks in the VOX selection
mode or appears when VOX is activated.
2. Auto Scan Indicator: Icon appears when the auto scan channel mode is
activated.
3.Weather Alert Indicator: This icon appears when the National Oceanic and
Atmospheric Administration (NOAA) alert mode is activated.
4.Alarm Indicator: Appears when the Clock Alarm mode is activated.
5.Call Ringer and Vibration Indicator: Appears when vibration call mode is activated.
6. RSSI Indicator; indicates receive signal strength.
7.Battery Level Indicator: Icon indicates the battery charge strength.
8.CODE: Continuous Tone Coded Squelch System (CTCSS) Indicator: CTCSS
tone code is displayed in two characters directly above.
9.CH: Indicates the channel number in use in FRS mode; channel number is
displayed in two characters directly above.
10. Key Lock Indicator: Appears when the key lock is activated.
11.Eight-character display; used in various modes to indicate user identification (ID),
operating parameters such as FR channel and CTCSS code, stopwatch operation,
FM radio frequency, time-of-day, temperature, compass heading, receive signal
level indicator, etc.
Each time the Function (F) Button is pressed, the FR-1500XTM scrolls through the
main menus; pressing and holding the Function button for 2 seconds or longer
activates the keylock (
Function (F), Monitor (M) and Press-to-Talk (PTT) are inoperable.
) feature, whereby all buttons except volume adjustment,
9
5
8
7
Accessories
SUPPLIED: (1) Belt Clip
SPRING
CLIPS
SPRING CLIP
RELEASE TAB
(PRESS DOWN)
SPRINGLOADED
BELT CLIP
OPTIONAL: (1) Headset P/N FRS-BHST
NOTE:
To order optional accessories for the
FR-1500XTM, please contact Customer Service
at 1-800-290-6650 or visit the Audiovox web site
at www.audiovox.com.
Belt Clip Accessory
Powering the FR-1500XTM Unit:
The FR-1500XTM unit operates on four AAA batteries installed in the battery compartment. You may operate the unit using type NiMH rechargeable batteries , or you may
use Alkaline batteries. Alkaline batteries will provide slightly better performance than
the rechargeable batteries. The rechargeable batteries can not be recharged while in
the unit.
Installing the Batteries:
Installing batteries in the FR-1500XTM unit is straightforward as shown in the
following illustration.
1.Remove unit from belt clip, and simply unlatch the cover clip at the bottom rear
of the unit; lift off the battery compartment cover.
2.Remove the weak batteries, if present.
3.Install four AAA batteries and carefully note battery polarity as marked within
the battery compartment.
NOTE:When the last battery is installed in place, the unit will vibrate for
approximately 2 seconds, indicating battery installation is correct,
and the self-test display will appear momentarily, then fade out.
4.Slide up the battery compartment cover in place; swing up the cover retaining
clip and snap it into position.
6
BELT CLIP
MOUNTING
STUD
POSITIVE
TERMINALS
BATTERY
COVER
COVER
CLIP (SWING
DOWN)
BATTER Y
COMPARTMENT
(4 AAA BATTERIES)
POSITIVE
TERMINALS
The following guidelines will improve performance and provide longer operating times
for the FR-1500XTM:
1. Do not mix old and new batteries.
2. The use of alkaline-type batteries is recommended to provide the longest
operating time.
3. Do not mix alkaline, standard (carbon-zinc) or rechargeable batteries.
4. If the unit is not to be used for an extended period of time, remove the batteries. Old
or leaking batteries can cause damage to the unit and will void the warranty.
Controls:
Power On/Off ( ) Button (6):
Press and hold this button ( ) momentarily to turn the unit on. The unit will perform a
brief self-test and then vibrate for a short time; the user identification code will display
from left-to-right, sequencing through all 8 display characters, followed by display of
TWO WAY (accompanied by a short melody). The unit will then beep and the FRS
standby display appears showing CH, CODE and the battery charge icon.
To turn the unit off, press and hold the button for a 2 second period. A short melody will
sound as the unit shuts off.
Function (F) Button (2):
In the standby mode, pressing this button will scroll through the various modes as
shown in the Operational Modes diagram.
Pressing the button for more than 1.5 seconds will activate or deactivate the KEY LOCK
feature in any mode. Refer to KEY LOCK function description to activate and deactivate
7
FRS-1500XTM OPERATIONAL MODES
MODES
TWO WAY
FM RADIO
WEATHER
COMPASS
TEMPERA TURE
TIME
FUNCTION (F) BUTTON
SET CH.
SEEK
FM
SET
CHAN
SET
CALIB
SET
UNIT
SET TIME
& UNIT
SET CODESET SCANSET VOX
TUNE
FM
SET
ALERT
SET
VARI
SET
TEMP
SET
MINUTES
MENUS
SET
PRESET
SET ALARM
HIGH
SET
ALARM
RIGHT , LEFT ARROW BUTTONS
SEEK
PRESET
SET ALARM
TUNE
PRESET
SET ALARM
LOW
HOUR
SET ALARM
MINUTE
SET
FM
STOPWA TCH
SET UP
SET
P-CH
STAR T
SET
DELAY
STOPRESET
SET
CALL
RING
SET
VIB
8
SET
ROGER
SET
BEEP
SET
QUIET
SET
TIME
OUT
TIMER
SET
NAME
NOTE: In KEY LOCK, all buttons will be disabled except for the Up ( ) Control/
Volume Button (6), the Down (
(14) and the PTT Button (16).
) Control/Volume Button (11), the Monitor (M) Button
Push-T o-T alk (PTT) Button (16):
Pressing and holding this button will allow you to speak to any transceiver that is set to
the same channel and privacy code setting as yours. Hold the transceiver approximately
1 to 2 inches from your face as you speak into the built-in microphone (17). After you
have finished speaking, release the PTT button to allow for reception of incoming
signals. It is not possible to transmit and receive at the same time.
The transmit LED indicator (4) located above the LCD Panel (5) will light red while the
PTT button is pressed. Releasing the button allows the unit to revert to standby mode.
The PTT button can also be used as a two-way call ringer. Pressing the button twice
quickly will call another party on the same channel. The letter T (transmit) will appear in
the display and the user-selected call melody will sound.
V olume Control (6 and 1 1):
In the standby mode, adjust the volume to a comfortable level between 01 and 16 by
pressing the Up (6) button to increase the volume level and the Down (11) button to
decrease the volume level. Pressing the Monitor (M) button momentarily will check the
volume setting level.
Up Button (6):
In the standby mode, pressing this briefly will increase the volume. In the function edit
mode, pressing the button briefly will shift from the current option in each sub-menu to
next option in the same sub-menu.
Pressing the button for more than 1.5 seconds allows navigation at a more rapid rate.
In the standby mode the volume will increase rapidly. In the function mode, different
options can be rapidly changed.
Down Button (11):
In the standby mode, pressing this briefly will decrease the volume. In the function edit
mode, pressing the button briefly will shift from the current option in each sub-menu to
next previous option in the same sub-menu.
Pressing the button for more than 1.5 seconds allows navigation at a more rapid rate.
In the standby mode the volume will decrease rapidly. In the function mode, different
options can be rapidly changed.
9
Menu Scroll Forward and Back Buttons (10)
These buttons are used to scroll through the options in a selected menu; the menu is
determined by mode selection using the Function (F) button. Refer to the Operational
Modes flow diagram.
Monitor (M) Button (14):
The Monitor Button is used to check the activity on a channel before transmitting. When
the Monitor Button is pressed, the green LCD panel (5) backlight will come on. Pressing
the Monitor Button during the edit function mode will confirm an entry and return the unit
to standby. Pressing the Monitor Button during a VOX tranmission (voice activated
transmission) will discontinue the transmission and disable the VOX function for 2
seconds.
External Microphone/Speaker (3):
This jack accepts an Audiovox FRS-BHST headset/microphone for total hands-free
operation.
External Battery Charging Connector (8):
This jack is part of a future upgrade for an Audiovox approved battery recharger. Do not
use this jack with any other charging devices. Please visit the Audiovox web site for
updates at www.audiovox.com. or contact Customer Service at 1-800-290-6650 for
additional optional accessories for the FR-1500XTM.
NOTES FOR GOOD COMMUNICA TION
1 . The FR-1500XTM 14 channels are shared on a ‘take turns’ basis. This means
other groups may be talking on any of the channels. A common code of
ethics/courtesy is to switch to another vacant channel and not to attempt
totalk over someone who is already using the channel you first selected.
2.The FR-1500XTM has been designed to maximize performance and
improve transmission range in the field. To avoid interference, it is
recommended that you do not use the units closer than 5 feet apart.
3.For best transmission results, always keep your mouth about 2-3 inches
from the microphone (17) and speak slowly in a normal voice.
10
Loading...
+ 21 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.