Audiovox FPE4707HR User Manual

LCD TV

FPE4707HR

Operating Manual

Before connecting, operating or adjusting this product, please read the manual completely.

Please keep this manual for future reference.

FOR ASSISTANCE CALL 1-800-619-3848 OR VISIT US AT WWW.AUDIOVOX.COM.

128-8036

Table of Contents

Important Information ......................................................................................................................1

Important Safety Precautions..........................................................................................................2

Setup...............................................................................................................................................5

Identification of Controls..................................................................................................................8

Connections...................................................................................................................................12

Basic Operations ...........................................................................................................................18

Memorizing the Channels..............................................................................................................20

Channel Selection .........................................................................................................................22

Setting Picture ...............................................................................................................................23

Setting Picture/Adjusting Image....................................................................................................24

Setting Sound ...............................................................................................................................25

System Setup................................................................................................................................27

Clock and Timer Setup..................................................................................................................28

Viewing Closed Captions ..............................................................................................................29

Setting Parental Control 30

PIP/PBP/POP Operations.............................................................................................................34

Electronic Program Guide ............................................................................................................36

Image Adjust for PC/Component Mode ........................................................................................37

Image Adjust for HDMI Mode .......................................................................................................38

Troubleshooting ............................................................................................................................39

Care and Maintenance..................................................................................................................40

Specifications................................................................................................................................41

................................................................................................................

Programming the Universal Remote Control ................................................................................42

Important Information

WARNING:

CAUTION-To reduce the risk of electric shock, do not

This product utilizes tin-lead solder, and fluorescent lamp containing a small amount of mercury. Disposal of these materials may be regulated due to environmental considerations. For disposal or recycling information, please contact your local authorities or the Electronic Industries Alliance: www.eia.org

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE.

The lightning flash with arrowhead symbol,

CAUTION

RISK OF ELECTRIC SHOCK DO NOT OPEN

perform any servicing other than that contained in the operating instructions unless you are qualified to do so.

within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

FCC STATEMENT

FCC Notice

LCD TV: A CLASS B digital device

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

FCC CAUTION:

Pursuant to 47CFR, Part 15.21 of the FCC rules, any changes or modifications to this monitor not expressly approved by the manufacturer could cause harmful interference and would void the user's authority to operate this device.

WARNING: This is a CLASS B product. In a domestic environment this product may cause

radio interference in which case the user may be required to take adequate measures to counter interference.

Important Safety Precautions

Electrical energy can perform many useful functions, but it can also cause personal injuries and property damage if improperly handled. This product has been engineered and manufactured with the highest priority on safety. But IMPROPER USE CAN RESULT IN POTENTIAL ELECTRICAL SHOCK OR FIRE HAZARD. In order to prevent potential danger, please observe the following instructions when installing, operating and cleaning the product. To ensure your safety and prolong the service life of your LCD TV product, please read the following precautions carefully before using the product.

1. Read these instructions---All operating instructions must be read and understood before the product is operated.

2. Keep these instructions---These safety and operating instructions must be kept in a safe place for future reference.

3. Heed all warnings---All warnings on the product and in the instructions must be observed closely.

4. Follow all instructions---All operating instructions must be followed.

5. Do not use this apparatus near water---for example, near a bathtub, washbowl,

kitchen sink, or laundry tub, in a wet basement, or near a swimming pool, and the like. Do not use immediately after moving from a low temperature to high temperature environment, as this causes condensation, which may result in fire, electric shock, or other hazards. Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus.

6. Clean only with dry cloth---Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.

7. Ventilation---Do not block any ventilation openings. Install in accordance with the manufacturer instructions. The vents and other openings in the cabinet are designed for ventilation. Do not cover or block these vents and openings since insufficient ventilation can cause overheating and/or shorten the life of the product. Do not place the product on a bed, sofa, rug or other similar surface, since they can block ventilation openings. This product is not designed for built-in installation; do not place the product in an enclosed place such as a bookcase or rack, unless proper ventilation is provided or the manufacturer’s instructions are followed.

8.Heat sources---Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

9.Grounding or Polarization---Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

10.Power cord protection---Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. NOTE: where the mains plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable.

11.Attachments---Only use attachments/accessories specified by the manufacturer. Do not use attachments not recommended by the manufacturer. Use of improper attachments can result in accidents.

Important Safety Precautions (continued)

12. Stand---Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. Do not place the product on an unstable trolley, stand, tripod or table. Placing the product on an unstable base can cause the product to fall, resulting inserious personal injuries as well as damage to the product. When mounting the product on a wall, be sure to follow the manufacturer’s instructions. Use only the mounting hardware recommended by the manufacturer.

13. Move Carefully---When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. Sudden stops, excessive force and uneven floor surfaces can cause the product to fall from the trolley. Never attempt to move the TV unless the AC power cord has been disconnected.

14. Lightning---Unplug this apparatus during lightning storms or when unused for long periods of time. For added protection for this television equipment during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna. This will prevent damage to the equipment due to lightning and power-line surges.

15. Servicing---Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

16. Replacement parts---In case the product needs replacement parts, make sure that the service person uses replacement parts specified by the manufacturer, or those with the same characteristics and performance as the original parts. Use of unauthorized parts can result in fire, electric shock and/or other danger.

17. Ove rloa din g-- -Do not o ver load wall outl ets , extensi on cor ds, or con venienc e rec eptacle s on oth er equipment as this can result in a risk of fire or electric shock.

18.Entering of objects and liquids---Never insert an object into the product through vents or openings. High voltage flows in the product, and inserting an object can cause electric shock and/or short internal parts. For the same reason, do not spill water or liquid on the product.

19.Damage requiring service---If any of the following conditions occurs, unplug the power cord from the AC outlet, and request a qualified service person to perform repairs. a. When the power cord or plug is damaged. b. When a liquid is spilled on the product or when objects have fallen into the product. c. When the product has been exposed to rain or water. d. When the product does not operate properly as described in the operating instructions. Do not touch the controls other than those described in the operating instructions. Improper adjustment of controls not described in the instructions can cause damage, which often requires extensive adjustment work by a qualified technician. e. If the product has been dropped or the cabinet has been damaged in any way. f. When the product displays an abnormal condition or exhibits a distinct change in performance. Any noticeable abnormality in the product indicates that the product needs servicing.

20.Safety checks---Upon completion of service or repair work, request the service technician to perform safety checks to ensure that the product is in proper operating condition.

21.Wall or ceiling mounting---When mounting the product on a wall or ceiling, be sure to install the product according to the method recommended by the manufacturer. This is a safety feature.

Important Safety Precautions (continued)

22. Power source---This product is intended to be supplied by a listed power supply indicated on the marking label. If you are not sure of the type of power supply to your home, consult your product dealer or local power company. For added protection for this product during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the cable system. This will prevent damage to the product due to lightning and power line surges. When the unit has to be used with another power supply voltage, the power cable must be changed. Consult your product dealer. The socket outlet should be installed near the equipment and easily accessible. Use only the power cord designated by our dealer to ensure safety and EMC. When connecting other products such as VCRs and personal computers, you should turn off the power of the unit for protection against electric shock.

23.Panel protection---The LCD panel used in this product is made of glass. Therefore, it can break when the product is dropped or impacted upon by other objects. Be careful not to be injured by broken glass pieces in case the LCD panel breaks.

24.Pixel defect---The LCD panel is a very high technology product, giving you finely detailed pictures. Occasionally, a few non-active pixels may appear on the screen as a fixed point of blue, green or red. Please note that this does not affect the performance of your product.

WARNING: For continued safety, apparatus with class I construction shall be connected to a mains socket outlet with a protective earthing connection.

Setup

Using the Remote Control

<Use the remote control by pointing it towards the remote sensor window of the set.

Objects between the remote control and sensor window may prevent proper operation.

Note: This illustration is for reference only. The remote sensor may be in different

locations on different models.

Cautions regarding use of remote control

<Do not expose the remote control to shock. In addition, do not expose the remote control to liquids, and do not

place in an area with high humidity.

<Do not install or place the remote control under direct sunlight. The heat may cause deformation of the unit. <The remote control may not work properly if the remote sensor window of the main unit is under direct sunlight or

strong lighting. In such a case, change the angle of the lighting or TV set, or operate the remote control closer to the remote sensor window.

Batteries for the Remote Control

Open the battery cover.

Insert two size-AA batteries.

<(Place the batteries with their terminals

corresponding to the (+) and (–) indications in the battery compartment.)

Replace the cover.

Precaution on battery use

Improper use of batteries can result in a leakage of chemicals and/or explosion. Be sure to follow the instructions below.

<Place batteries with their terminals corresponding to the (+) and (–) indications. <Different types of batteries have different characteristics. Do not mix batteries of different types. <Do not mix old and new batteries. Mixing old and new batteries can shorten the life of new batteries and/or cause

old batteries to leak chemicals.

<Remove batteries as soon as they are non-operable. Chemicals that leak from batteries can cause a rash. If

chemical leakage is found, wipe with a cloth.

<The batteries supplied with the product may have a shorter life expectancy due to storage conditions. <If the remote control is not used for an extended period of time, remove the batteries from the remote control.

Setup

Power connection

Household

Plug into AC outlet.

AC cord

Connecting the AC plug to the wall outlet as illustrated.

Note:

<This product should be operated only from the type of power source indicated on the marking label. <Always unplug the AC cord from power outlet when not using for a long period of time.

power outlet

Speaker connection

Connect the speaker audio cable to the external speaker

（Red）

（Black）

（Red）

output jack on the unit matching the "+" and "-" ends of the cable.

（Right speaker）（Left speaker）

Note:

1.Unplug the TV set and all connected components before connecting the speakers.

2.The illustration may be different depending on model.

Setup

! For proper reception of VHF/UHF channels, an external antenna is required. For best reception, an outdoor

antenna is recommended.

! When you enjoy the terrestrial TV programs, connect the antenna to the AIR input on the TV rear.

! When you enjoy the cable TV programs, connect the cable TV's cable to the CABLE input on the TV rear.

! Select the TV Source (AIR or CABLE) in the CHANNEL SETUP menu and then perform auto channel

search.(See <Memorizing the Channels> section)

Connect to Cable TV System

75 Ohm coaxial cable

TV REAR

VHF antenna

UHF antenna

for so ftwar e upda te only

RS- 232

Mixer

75 Ohm coaxial cable

Notes:

! To obtain optimum quality picture and sound, an antenna, the correct cable (75 Ohm coaxial) and the correct terminating plug

are required.

! If a communal antenna system is used, you may require the correct connection cable and plug between the wall antenna

socket and your television receiver.

! Your local television service centre or dealer may be able to assist you in obtaining the correct antenna system for your

particular area and the accessories required.

! Any matters regarding antenna installation, upgrading of existing systems or accessories required, and the costs incurred, are

your responsibility.

Main unit (front view)

Identification of Controls

Remote Sensor Power Indicator

Channel Down/up

Volume Down/up

Input Source Select

Power On/standby

VOL

INPUT

1. POWER

Press this button to turn the unit ON from STANDBY mode. Press it again to turn the set back to STANDBY.

2.INPUT To select the input signal source

3. MENU

Press this button to access the MENU main page.

4. Volume up/down

Press the Volume up/down button to directly increase or decrease the sound volume level. In OSD Menu, press these buttons to adjust the value or setting of each item

5. Channel up/down

Channel up or down. In OSD Menu, press these buttons to choose the OSD items.

Note:

POWER ,VOL+/-, CH+/-, MENU and INPUT on the main unit have the same functions as the corresponding

buttons on the remote control. This operation manual provides a description based on operating functions with the remote control.

Main unit (rear view)

Identification of Controls (continued)

HDM I 1

DVI 1 IN

AUDIO

5 6

S-VID EO

for s oftwa re upd ate onl y

RS -232

8 9 10

11 12

HDM I 2

DVI 2 IN

1. Speaker output jacks

2. HDMI/DVI inputs 1/2

To connect with those equipments with HDMI or DVI interface, for example, Set-top box or DVD

player.(A HDMI-to-DVI adapter cable is required when you are connecting a DVI-equipped device to this

TV.)

3. VGA interface/Audio in Connect with those equipments with VGA interface, for example, PC. Connect the audio jack as well with audio cable.

4. Component inputs 1/2 Connect to the audio and component output jacks of a DVD player or Set-top box.

5. AV inputs 1/2 Receive video/audio signals from external sources such as VCR or DVD player.

6. AV output Connect to the VCR input jacks to record programs.

7. Headphone jack

8. S/PDIF digital audio out terminal (optical)

9. USB port

For software update only. The user can not operate the unit through the USB port.

10.RS-232 control interface

For service only. The user should not use this interface.

11.AIR antenna input

Connect to outdoor antenna.

12.CABLE input Connect to a cable TV system.

Remote Control

Identification of Controls

1. POWER

Turn the unit on or off

2. To select additional products to be controlled with remote

control

Note: This remote control is an universal remote

control. If your remote control does not work correctly when you operate the unit, please try to press TV button.

3. Direct channel selector/number buttons

Use these number buttons to select channel or input password.

4. Dash(-)

Used to enter a program number for multiple program

channels such as 2-1,2-2, etc.

5. INPUT

To quickly select input source

6. RETURN

To quickly return to the previous channel

7. CH+/-

To select channels upward or downward

8. VOL+/ Used to adjust volume.

9. MUTE Sound mute

10.MENU

To access the Menu main page

MTS/SAP

ZOOM CCD SLEEP

LIST

FAVORITE

PIP

P.POSITION SWAP FREEZE

AUDIO

PICTURE

11.INFO

To display channel status or signal information

12.Menu navigation buttons: 5634

56: To move upward or downward in menu operation;

34: To move left or right in menu operation;

To adjust selected menu item in menu operation;

OK button: To confirm or toggle between the settings of the

selected menu item.

13.EXIT

Used to exit the menu

14.GUIDE

To display the on-screen Electronic Program Guide(EPG)

Remote Control

15 17

19 21

23 25

MTS/SAP

LIST

PIP

P.POSITION SWAP FREEZE

ZOOM CCD SLEEP

FAVORITE

AUDIO

Identification of Controls

15. ZOOM

To select screen aspect ratio

16. CCD

To select closed caption mode

17.MTS/SAP

To select STEREO, SAP or MONO (Analog TV mode)

To select audio track (DTV mode)

18.SLEEP

To set Sleep timer

19.LIST

To display program list

20.PICTURE

To select the picture mode

21. FAVORITE

To display favorite program list

22. AUDIO

To select the sound mode

23. PIP

To select PIP/PBP/POP/full screen mode

24. FREEZE

To freeze current picture

25. P.POSITION

To select PIP sub picture position

PICTURE

26.SWAP

To swap the main and sub pictures

(only in PIP or PBP mode)

24 26

Note: the buttons without description are not active.

Connections

Cautions before connecting

Carefully check the terminals for position and type before making any connections.

The illustration of the external equipment may be different depending on your model.

Loose connectors can result in image or color problems. Make sure that all connectors are securely inserted into their terminals.

Refer to the user manual of the external device as well.

When connecting an external device, turn the power off on the panel to avoid any issues.

Connect an Audio Processor or Hi-Fi (Digital Audio)

For a full Home Theater sound experience, you must connect your Hi-Fi or Audio processor to the S/PDIF OUT(Optical) terminal on the TV rear.

Note:

The S/PDIF OUT terminal only can output digital TV program’s audio.

AUDIO

Optical cable

S-VID EO

for so ftwar e upda te only

RS- 232

Audio Processor

Connect a VCR

AUDIO

S/PDIF IN (Optical)

HIFi System

How to connect:

Connect the Audio/Video cables between the Audio (L/R)/Video jacks on the unit and VCR.

S-VIDE O

for so ftwar e upda te only

RS- 232

S-video cable

Video cable

Audio cable

Note: For better video, you can use the S-VIDEO terminal if your source supports it. S-VIDEO input uses the same circuit as Video1. S-VIDEO has priority if both connectors are inserted. Use one or the other.

To play VCR

1. Turn on your TV, press INPUT button on the remote control to display INPUT SELECT menu, use5/6to select AV1/SVideo and then press OK to confirm.

2. Turn on your VCR , insert a videotape and press the Play button.

Yellow (VIDEO)

White (AUDIO L)

Red (AUDIO R )

ANT OUT

AV OUT

AUDIO

AV IN

AUDIO

VID EO

Rear of the VCR

S VI DEO

VCR

ANT IN

Connect a Camcorder

Connections (continued)

AUDIO

S-VID EO

for so ftwar e upda te only

Video cable

RS- 232

Audio cable

AUDIO

Yellow (VIDEO)

White (AUDIO L)

Red (AUDIO R )

OUT

RLVID EO

Camcorder

How to connect:

Connect the Audio/Video cables between the Audio (L/R)/Video jacks on the unit and camcorder.

To playback Camcorder

1. Turn on your TV, press INPUT button on the remote control to display INPUT SELECT menu, use 5/6to select AV2 and then press OK to confirm .

2. Turn on your camcorder and set it to output mode. (For details, refer to your camcorder user manual.)

3. Insert the tape into the camcorder and press Play button.

Note:

The operations of the camcorder may be different and is dependant on your model. Please read the user manual of your camcorder to confirm operation.

HDMI Connection

Connections (continued)

HDM I 2

DVI 2 IN

HDM I 1

DVI 1 IN

HDMI cable

DVD player or STB with

HDMI interface

How to connect a DVD Player (or STB) using HDMI Connection:

Connect the HDMI cable between the HDMI interface on the unit and HDMI output on the DVD player (or STB).

To playback DVD (or STB)

1. Turn on your TV, press INPUT button on the remote control to display INPUT SELECT menu, use 5/6to select HDMI1(or select HDMI2 if HDMI2 interface is used) and then press OK to confirm.

2. Turn on your DVD player or STB and do relative operations.

Note:

If the external device has DVI output only, use a DVI to HDMI adapter cable to connect to the HDMI terminal. Connect the audio cable to the AUDIO terminal of VGA IN on the TV rear.

Connections (continued)

Connect a DVD player or Set-Top Box

white (audio L)

red (audio R, Pr)

Green (Y)

Blue (Pb)

HDM I 2

DVI 2 IN

HDM I 1

DVI 1 IN

RRGG BB

Video cable

RRGG BB

AUD IOCOM PONEN T

S VI DEO

AUD IO

L R

AUDIO

R L V IDEO

AV OUT

Rear of the DVD, STB

AUDIO

Audio cable

DVI

S-VID EO

for so ftwar e upda te only

RS- 232

DVD player, STB, etc.

How to connect:

Connect the Video cable between the Y, Pb, Pr input jacks on the unit and Y, Pb, Pr output jacks on the DVD (or STB). Component color inputs provide luminance and separate color signal.

Connect the Audio cable between the AUDIO input jack on the unit and AUDIO output jacks on the DVD (or STB) .

To playback DVD or STB

1. Turn on your TV, press INPUT button on the remote control to display INPUT SELECT menu, use 5/6to select Component1 (or select Component2 if COMPONENT2 input terminals are used) and then press OK to

confirm .

2. Turn on your DVD or STB and do relative operations.

+ 37 hidden pages