Audiovox FPE3706 User Manual

LCD Color TV

with ATSC Tuner

Operating Manual

FPE3706

Before connecting, operating or adjusting this product, please read the manual completely. Please keep this manual for future reference.

The illustrations and on-screen displays in this operation manual are for explanation purposes and may vary slightly from the actual operations.

Menu items that are not selectable are grayed out.

FOR ASSISTANCE CALL 1-800-619-3848 OR VISIT US AT WWW.AUDIOVOX.COM.

1287617

Important Information

WARNING

To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.

CAUTION

RISK OF ELECTRIC SHOCK DO NOT OPEN

CAUTION-To reduce the risk of electric shock, do not

perform any servicing other than that contained in the operating instructions unless you are qualified to do so.

This symbol is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

This symbol is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

This product utilizes tin-lead solder, and fluorescent lamp containing a small amount of mercury. Disposal of these materials may be regulated due to environmental considerations. For disposal or recycling information, please contact your local authorities or the Electronic Industries Alliance: www.eia.org

FCC STATEMENT

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

FCC CAUTION:

Pursuant to 47CFR, Part 15.21 of the FCC rules, any changes or modifications to this monitor not expressly approved by the manufacturer could cause harmful interference and would void the user's authority to operate this device.

WARNING:

This is a CLASS B product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures to counter interference.

IMPORTANT SAFETY INSTRUCTIONS

1) Read these instructions.

2) Keep these instructions.

3) Heed all warnings.

4) Follow all instructions.

5) Do not use this apparatus near water. Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus.

6) Clean only with dry cloth.

7) Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.

8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

10) Protect the power cord from being walked on or

pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

11) Only use attachments/accessories specified by the

manufacturer.

12) Use only with the cart, stand, tripod,

bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

13) Unplug this apparatus during lightning storms or

when unused for long periods of time.

14) Refer all servicing to qualified service personnel.

Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

Important Safeguards

Before using your TV, please read these instructions completely, and keep this manual for future reference. Carefully observe and comply with all warnings, cautions and instructions placed on the unit or described in the operating instructions or service manual.

WARNING

To guard against injury, the following basic safety precautions should be observed in the installation, use and servicing of the unit.

Power Sources

This unit should be operated only from the type of power source indicated on the information label. If you are not sure of the type of electrical power supplied to your home, consult your dealer or local power company.

Grounding or Polarization

This unit is equipped with a polarized AC power cord plug (a plug having one blade wider than the other), or with a threewire grounding type plug (a plug having a third pin for grounding). Follow the instructions below:

For the unit with a three-wire grounding type AC power cord plug (Class 1 unit)

This unit must be connected to an AC power socket outlet with a protective earthing connection.

For the unit with a polarized AC power cord plug

This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug still fails to fit, contact your electrician to have a suitable outlet installed. Do not defeat the safety purpose of the polarized plug by forcing it in.

Wall outlet

Do not use a poor fitting outlet. Insert the plug fully into the outlet. If it is loose, it may cause arcing and result in fire. Contact your electrician to have the outlet changed.

Wiring

For your safety, unplug the AC power cord when wiring cables.

Electric shock

Do not touch the AC power cord or the unit with a wet hand. If you plug/unplug the AC power cord from the unit with a wet hand, it may cause electric shock. Never attempt to move the unit unless the AC power cord is disconnected.

Cleaning

= Clean the AC power plug regularly. = If the plug is covered with dust and it picks

up moisture, its insulation may deteriorate and result in fire. Unplug the AC power plug and clean it regularly.

= Unplug the AC power cord when cleaning this unit. If not, it

may result in electric shock.

= Clean the cabinet of the TV with a dry soft cloth. To remove

dust from the screen, wipe it gently with a soft cloth.

= Stubborn stains may be removed with a cloth slightly

dampened with a solution of mild soap and warm water. Never use strong solvents such as thinner or benzine for cleaning.

= If using a chemically pretreated cloth, please follow the

instruction provided on the package.

Overloading

Do not overload wall outlets, extension cords or convenience receptacles beyond their capacity, since this can result in fire or electric shock.

Power

Always turn the unit off when it is not being used. When the unit is left unattended and unused for long periods of time, unplug it from the wall outlet as a precaution against the possibility of an internal malfunction that could create a fire hazard.

Sound

If a snapping or popping sound from the TV is continuous or frequent while the TV is operating, unplug the TV and consult your dealer or service technician. It is normal for TV’s to make occasional snapping or popping sounds, particularly when being turned on or off.

AC Power Cord

If you damage the AC power cord, it may result in fire or electric shock. = Do not pinch, bend, or twist the cord excessively. The core

lines may be bared and cut, and cause short-circuit, resulting in fire or electric shock.

= Do not convert or damage the AC power cord. = Do not put anything heavy on the AC power cord. Do not

pull the AC power cord.

= Keep the AC power cord away from heat sources. = Be sure to grasp the plug when disconnecting the AC

power cord. If the AC power cord is damaged, stop using it and replace with a new one.

Ventilation

The slots and openings in the TV are provided for necessary ventilation. To ensure reliable operation of the unit, and to protect it from overheating, these slots and openings must never be blocked or covered. Unless proper ventilation is provided, the unit may gather dust and get dirty. For proper ventilation, observe the following:

= Do not install the unit turned backward or sideways. = Do not install the unit turned over or upside down. = Never cover the slots and openings with a cloth or other

materials.

= Never block the slots and openings by placing the unit on a

bed, sofa, rug or other similar surface.

= Never place the unit in a confined space, such as a

bookcase or built-in cabinet, unless proper ventilation is provided.

= Leave some space around the unit. Otherwise, adequate

air-circulation may be blocked causing overheating and cause fire or damage the unit.

Heat sources

Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

Important Safeguards

Do not use this apparatus near water

For example, near a bathtub, washbowl, kitchen sink, or laundry tub, in a wet basement, or near a swimming pool, and the like. Do not use immediately after moving from a low temperature to high temperature environment, as this causes condensation, which may result in fire, electric shock, or other hazards. Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus.

Entering of objects and liquids

Never insert an object into the product through vents or openings. High voltage flows in the product, and inserting an object can cause electric shock and/or short internal parts. For the same reason, do not spill water or liquid on the product.

Lightning

Unplug this apparatus during lightning storms or when unused for long periods of time. For added protection for this television equipment during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna. This will prevent damage to the equipment due to lightning and power-line surges.

Servicing

Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

Replacement parts

In case the product needs replacement parts, make sure that the service person uses replacement parts specified by the manufacturer, or those with the same characteristics and performance as the original parts. Use of unauthorized parts can result in fire, electric shock and/or other danger.

Attachments

Only use attachments/accessories specified by the manufacturer. Do not use attachments not recommended by the manufacturer. Use of improper attachments can result in accidents.

Damage requiring service

If any of the following conditions occurs, unplug the power cord from the AC outlet, and request a qualified service person to perform repairs. a. When the power cord or plug is damaged. b. When a liquid is spilled on the product or when objects have

fallen into the product. c. When the product has been exposed to rain or water. d. When the product does not operate properly as described

in the operating instructions.

Do not touch the controls other than those described in the

operating instructions. Improper adjustment of controls not

described in the instructions can cause damage, which

often requires extensive adjustment work by a qualified

technician. e. If the product has been dropped or the cabinet has been

damaged in any way. f. When the product displays an abnormal condition or

exhibits a distinct change in performance. Any noticeable

abnormality in the product indicates that the product needs

servicing.

Safety checks

Upon completion of service or repair work, request the service technician to perform safety checks to ensure that the product is in proper operating condition.

Wall or ceiling mounting

When mounting the product on a wall or ceiling, be sure to install the product according to the method recommended by the manufacturer. This is a safety feature.

Panel protection

The panel used in this product is made of glass. Therefore, it can break when the product is dropped or impacted upon by other objects. Be careful not to be injured by broken glass pieces in case the panel breaks.

Pixel defect

The panel is a very high technology product, giving you finely detailed pictures. Occasionally, a few non-active pixels may appear on the screen as a fixed point of blue, green or red. Please note that this does not affect the performance of your product.

Antennas Outdoor Antenna Grounding

If an outdoor antenna is installed, follow the precautions below. An outdoor antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can come in contact with such power lines or circuits.

WHEN INSTALLING AN OUTDOOR ANTENNA SYSTEM, EXTREME CARE SHOULD BE TAKEN TO KEEP FROM CONTACTING SUCH POWER LINES OR CIRCUITS AS CONTACT WITH THEM IS ALMOST INVARIABLY FATAL.

Be sure the antenna system is grounded so as to provide some protection against voltage surges and built-up static charges. Section 810 of the National Electrical Code (NEC) in USA and Section 54 of the Canadian Electrical Code in Canada provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna discharge unit, connection to grounding electrodes, and requirements for the grounding electrode.

Antenna Grounding According to the National Electrical Code, ANSI/NFPA 70

Antenna lead-in wire

Ground clamps

Antenna discharge unit

Electric service equipment

NEC: National Electrical Code

(NEC Section 810-20)

Grounding conductors (NEC Section 810-21)

Ground clamps

Power service grounding electrode system (NEC Art 250 Part H)

Table of Contents

Important Information ..............................................................................................................................1

Important Safeguards...............................................................................................................................2

Table of Contents......................................................................................................................................4

Introducing the TV ...................................................................................................................................6

Remove the TV from the Box............................................................................................................6

Installing the TV ................................................................................................................................6

Carrying or Moving the TV................................................................................................................6

Attach the Speaker to the Display.....................................................................................................7

Remove the Stand ............................................................................................................................7

TV Controls and Connectors .........................................................................................................8

Control Panel ....................................................................................................................................8

Connectors........................................................................................................................................9

Connecting the TV....................................................................................................................................10

Basic Connections..........................................................................................................................10

Overview ...........................................................................................................................................10

Connecting Antenna System.............................................................................................................10

Connecting Cable System ................................................................................................................10

Connecting Cable Box ......................................................................................................................11

Connecting Digital Cable Box ...........................................................................................................11

Connecting Satellite Receiver...........................................................................................................12

Connecting Digital Satellite Receiver................................................................................................12

Using External Equipment .............................................................................................................13

Introduction .......................................................................................................................................13

Equipment with HDMI Connection ....................................................................................................13

Equipment with DVI Connection .......................................................................................................14

Equipment with Coaxial Digital Audio ...............................................................................................14

Connecting a VCR for Playing Back .................................................................................................15

Connecting a VCR for Recording......................................................................................................15

Connecting a DVD Player with Component Video Connectors ........................................................16

Connecting a DVD Player with S-Video and Audio Connectors .......................................................16

Connecting a PC...............................................................................................................................17

Connecting a Camcorder or “PlayStation” ........................................................................................17

Connecting a Second TV or Monitor.................................................................................................18

Connecting Headphones ..................................................................................................................18

Introducing the Remote Control..............................................................................................................19

Insert Batteries into the Remote Control...........................................................................................19

Using the Remote Control.................................................................................................................19

Button Descriptions...........................................................................................................................20

Getting Start 22

Running Initial Setup.........................................................................................................................22

Setting a Secret Number...................................................................................................................23

Menu Navigation ...............................................................................................................................23

Watching TV..............................................................................................................................................24

Turning On/Off .................................................................................................................................24

Introducing Channel Number............................................................................................................24

Selecting Channels...........................................................................................................................24

Adjusting Volume..............................................................................................................................25

Using FREEZE button.......................................................................................................................25

Using ZOOM button ..........................................................................................................................25

..............................................................................................................................................

Table of Contents

Adjusting MENU Options.........................................................................................................................27

Picture Control ................................................................................................................................27

Accessing Picture Menu ...................................................................................................................27

Selecting Picture Options..................................................................................................................27

Adjusting Picture Settings .................................................................................................................28

Adjusting Screen Settings.................................................................................................................28

Audio Control ..................................................................................................................................29

Accessing Audio Menu......................................................................................................................29

Selecting Audio Options....................................................................................................................29

Setting Channels.............................................................................................................................30

Accessing Channels Menu ...............................................................................................................30

Selecting Channel Options ...............................................................................................................30

Setting Channel List..........................................................................................................................30

Setting Favorite Channels.................................................................................................................31

Using the FAVORITE button .............................................................................................................31

Editing Channel Name ......................................................................................................................31

Using the Program Guide...............................................................................................................32

Accessing Program Guide ................................................................................................................32

Using the Program Guide .................................................................................................................32

Setting System ...............................................................................................................................33

Accessing Settings Menu..................................................................................................................33

Setting Date & Time..........................................................................................................................33

Setting Timer.....................................................................................................................................33

Input Select .......................................................................................................................................34

Setting Caption Vision.......................................................................................................................34

Using the CCD button .......................................................................................................................34

Setting Menu & Display.....................................................................................................................34

Editing Input Labels ..........................................................................................................................35

Setting Screen Saver ........................................................................................................................35

Running Reset System .....................................................................................................................35

Parental Lock Control.....................................................................................................................36

Accessing Locks Menu .....................................................................................................................36

Selecting Locks Options ...................................................................................................................36

Viewing Locked or Blocked Programs ..............................................................................................37

Other Information .....................................................................................................................................38

Troubleshooting ................................................................................................................................38

Care and Maintenance......................................................................................................................40

Specifications....................................................................................................................................41

Programming your Remote Control ..................................................................................................42

Manufacturer's Codes.......................................................................................................................44

Introducing the TV

Remove the TV from the Box

Installing the TV

STOP! To safely remove the television from the box It’s best to use 2 people to remove the television for stability.

1. Remove cardboard holders from the box.

2. Remove the cardboard; however, keep the wrapping

on the television to protect it while moving.

3. Lift onto installation location as the diagram illustrates.

Select a steady platform with good ventilation to place the TV.

= Keep enough space above and behind the Display.

The TV should be installed near an easily accessible

power outlet. To prevent internal heat buildup, do not block the

ventilation openings. Do not install the TV in a hot or humid place, or in a

place subject to excessive dust or mechanical vibration.

Be sure to take measures to prevent the TV from toppling over and causing injury.

= To obtain the best picture, do not expose the screen to direct illumination or

direct sunlight. It is recommended to use spot lighting directed down from the ceiling or to cover the windows that face the screen with opaque drapery. It is desirable to install the TV in a room where the floor and walls are not of a reflective material.

6 inches

(15 cm) or more

Carrying or Moving the TV

Cautions:

Do not install the TV in protruding locations.

Do not install this unit in restaurants where oily vapors occur. Dust absorbing

oil may enter into the unit and damage the unit. Do not install this unit outdoors. If the unit is exposed to rain, it may result in fire

or electric shock. If the unit is exposed to direct sunlight, the unit may heat up and cause damage to the unit. Do not install this unit in a vehicle or hang from the ceiling. Bumping of the

vehicle may cause the unit to fall down and cause injury. Do not install this unit in a ship or vessel. If the unit is exposed to seawater, it

may cause fire or damage the unit. If you install the unit on a non-level surface, the unit may fall or drop and cause

injury or damage. If you place the unit on an unstable surface, the unit may fall and cause injury or

damage. Do not hang anything on the unit. If you do so, the unit may fall from the stand or

wall-mount bracket, causing damage or serious injury.

When you move the TV, carry it by two or more people.

When you move the TV, hold the upper and bottom frames of the TV, not the

speaker. As the glass surface of the TV has a special coating, be careful to avoid

touching the glass surface as far as possible. When transporting, do not subject the unit to shocks or vibration, or excessive

force.

Introducing the TV

Attach the Speaker to the Display

The appearance of the unit may differ from the actual one.

To deattach the speaker, perform the steps in reverse order.

Remove the Stand

Cautions:

1. Carefully handle the unit during setup and consult authorized service

personnel to ensure successful installation.

2. Before performing work spread cushion over the base area to lay the Display

on. This will prevent it from being damaged.

3. Disconnect the AC power cord firstly.

Screw the Speaker and the Fixed board to the unit using the supplied screws and tighten securely, then install the two Connecting covers as

the diagram illustrates.

Connect the speaker audio cable between the speaker terminals on the unit and the speaker matching polarity according to the terminals’ color.

Fixed board

Screws

Connecting cover

Fixed board

Screws

Connecting cover

Cautions:

1. Carefully handle the unit during setup and consult authorized service

personnel to ensure successful installation.

2. Before performing work spread cushion over the base area to lay the Display

on. This will prevent it from being damaged.

3. Disconnect the AC power cord firstly.

Screws

Take off the rear cover.

Do not remove the stand from the Display unless using an optional bracket to mount it.

The appearance of the unit may differ from the actual one.

To attach the stand, perform the steps in reverse order.

Rear cover

Stand

Loosen the screws on the Stand to remove the Stand.

Replace the rear cover

Screws

Introducing the TV

TV Controls and Connectors

Control Panel

Item Description

Power Indicator

Remote Sensor

CH-/CH+

VOL-/VOL+

POWER

INPUT

Receives IR signals from the remote control.

Press to scan through channels. In menu operations, these buttons serve as down/up buttons.

Press to adjust the volume. In menu operations, these buttons serve as left/right buttons.

To access the Menu main page.

Turn the unit on or off.

To display the INPUT source list or to quickly select input source.

CH-

CH+

VOL-

VOL+

INPUT

3 4 5

6 7

In normal viewing, press the MENU button first time to access the Menu main page.

In Menu operations, the MENU button is used to confirm or alter the settings of the selected menu item, which means it has the same function with the OK button on the remote control unit.

TV Controls and Connectors

Introducing the TV

Connectors

1 2 3 4 5

10 11

Item Description

HDMI IN

Audio IN for DVI

or D-Sub interface

D-Sub IN

RS-232 terminal

RF IN

Component Video

IN ½ / Audio IN

S-VIDEO input

Composite Video

IN ½ /Audio IN

USB Port

Coaxial Digital

Audio OUT

HDMI (High-Definition Multimedia Interface) provides an uncompressed, all-digital audio/video interface between this TV and any HDMI-equipped audio/video component, such as a set-top box and DVD player. HDMI supports enhanced, or high-definition video, plus two-channel digital audio.

Use this audio input when you are using DVI connection or D-Sub connection. A HDMI-to-DVI adapter is necessary when you are connecting a DVI-equipped device to this TV

Connects to a PC or other Analog RGB devices such as Video Conferencing or Set-top Boxes.

For service only. The user should not use this terminal.

RF input that connects to your cable system or outdoor antenna.

Connect to your DVD player’s or digital set-top box’s component video (YPbPr) and audio (L/R) jacks. Component video provides better picture quality than the S-VIDEO or the composite video connections.

Connects to the S-VIDEO output jack of your VCR or other video equipment that has S-VIDEO. S VIDEO provides better picture quality than the composite video connection.

Connect to the composite video and audio output jacks on your VCR or other video device.

For service only. The user should not use this port.

Connects to the digital audio input of a digital audio component.

Video/Audio OUT

Headphones jack

Connects to your VCR to record programs as desired or connects to hook up a second TV or monitor.

Only analog TV programs, AV1and AV2 input sources can be output through the AV output jacks.

Connects to your headphones. If your headphones do not match the jack, use a suitable plug adaptor (not supplied).

Connecting the TV

Basic Connections

Overview

Connecting Antenna System

To display clear crisp pictures, you must connect your TV correctly and choose the correct display format. It is strongly recommended to connect the cable and antenna input using a 75-ohm coaxial cable to receive optimum picture quality signal. A 300-ohm twin lead cable can be easily affected by radio noise and the like, resulting in signal deterioration. If you use a 300-ohm twin lead cable, keep it as far away as possible from the TV. The way in which you connect your TV will vary, depending on how your home receives a signal (antenna and satellite; cable and cable box). Do not use an indoor antenna, which is especially susceptible to radio noise.

Disconnect all power sources before making any connections.

For best results, use this connection if you have an antenna system.

Antenna cable

Connecting Cable System

Be sure to choose [Antenna] before you start Auto Program. See chapter [Getting Start] for details.

For best results, use this connection if you have a cable system.

CATV cable

Be sure to choose [Cable] before you start Auto Program. See chapter [Getting Start] for details.

Basic Connections

Connecting the TV

Connecting Cable Box

Connecting Digital Cable Box

For best results, use this connection if you have a cable system and your cable company scrambles some channels, such as premium channels or all channels (which requires you to use a cable box). Connect the CATV cable to the cable box’s input jack. Then use a coaxial cable to connect the cable box’s output jack to the TV’s RF input jack.

CATV cable Coaxial Cable

OUT

Cable box

Be sure to choose [Cable] before you start Auto Program. See chapter [Getting Start] for details.

Connect the RF coaxial cable from the CATV to the input of the digital cable box. Use a component video cable to connect the YPbPr jacks of your digital cable box to the TV’s component jacks. Component video connection is necessary to view digital broadcastings in 1080i, 720p, 480i and 480p. This TV displays most format types of picture. The component Jacks do not provide audio, so audio cables must be connected to provide sound.

Component video cable

Digital Cable Box

Audio cable RF coaxial cable

Cables are often color-coded to connectors. Connect red to red, white to white, etc.

Connecting the TV

Basic Connections

Connecting Satellite Receiver

Connect the satellite antenna cable to the satellite receiver’s SATELLITE IN jack. Use AV cables to connect the satellite receiver’s AUDIO and VIDEO OUT jacks to the TV’s AUDIO and VIDEO IN jacks.

S-VIDEO cable

Satellite Receiver

Satellite antenna cable

Cables are often color-coded

AV cable

to connectors. Connect red to red, white to white, etc.

If your is not equipped with S-VIDEO, use a VIDEO cable

satellite receiver

(yellow) instead of the S-VIDEO cable.

Connecting Digital Satellite Receiver

Connect the RF coaxial cable from the satellite dish to the input of the digital satellite receiver. Use a component video cable to connect the YPbPr jacks of your digital satellite receiver to the TV’s component jacks. Component video connection is necessary to view digital broadcastings in 1080i, 720p, 480i and 480p. This TV displays most format types of picture. The component Jacks do not provide audio, so audio cables must be connected to provide sound.

Component video cable

Digital Satellite Receiver

Audio cable RF coaxial cable

Cables are often color-coded to connectors. Connect red to red, white to white, etc.

Using External Equipment

Connecting the TV

Introduction

Equipment with HDMI Connection

You can connect many types of external equipment to your TV, like a DVD player, VCR, Digital TV tuner, PC, HDMI equipment, game console and camcorder. To view external source images, select the input source from INPUT on the remote control unit or on the Display.

Notes and Cautions:

= Disconnect all power sources before making any connections. = Carefully check the terminals for position and type before making any

connections.

= The packing contents of this TV may not include the cables or adaptors

mentioned in this chapter.

= Refer to your external equipment operation manual carefully before making

connections.

= Loose connectors can result in image or color problems. Make sure that all

connectors are securely inserted into their terminals.

= Refer to your external equipment operation manual for the signal type. = The illustration of the external equipment may be different depending on your

model.

For best results, use this connection if your equipment has a High-Definition Multimedia Interface (HDMI). Use a HDMI cable, connect the equipment’s HDMI OUT jack to the TV’s HDMI IN jack.

HDMI cable

Equipment with HDMI output

The HDMI jack provides both video and audio signals, so it is not necessary to connect the audio cable.

Connecting the TV

Using External Equipment

Equipment with DVI Connection

If you are connecting equipment with DVI connector to this TV, you will need to use an adapter. You can use a commercial HDMI-to-DVI cable or an HDMI adapter. Both are available at your local electronics store. When you use the adapter, you will also need to use separate audio cables for sound as DVI connector is for video signals only.

HDMI INPUT

D - Sub/D VI AUDIO IN PUT

D-Su b INPUT ( )

PC/DTV I NPUT

RS-2 32

COMP ONENT

S- VID EO

VIDEO

2 1

Audio cable

HDMI-to-DVI cable or adapter

Equipment with DVI output

Equipment with Coaxial Digital Audio

You can use the TV's Coaxial Digital Audio OUT jack to connect a digital audio device, such as an audio amplifier. Use an coaxial audio cable to connect the TV’s Coaxial Digital Audio OUT jack to the device’s Coaxial Digital Audio IN jack.

Coaxial audio cable

Audio amplifier

LINE OUT

LINE

L AUDIO R

COAXIAL AUDIO IN

The Digital Audio OUT jack is available only when a digital TV channel is received.

Using External Equipment

Connecting the TV

Connecting a VCR for Playing Back

Use AV cables to connect the VCR’s AV output jacks to the TV’s AV input jacks. If your VCRs have S-VIDEO jacks, for best picture quality, use an S-VIDEO connection instead of the video cable (yellow) on your combined A/V cable. Use a S-VIDEO cable to connect the VCR’s S-VIDEO OUT jack to the TV’s SVIDEO IN jack. S-VIDEO does not provide audio, so audio cables must be connected to provide sound.

HDMI INPUT

D - Sub/D VI AUDIO IN PUT

D-Su b INPUT ( )

PC/DTV I NPUT

RS-2 32

COMP ONENT

S- VID EO

VIDEO

2 1

S-VIDEO cable

Cables are often color-coded to connectors. Connect red to red, white to white, etc.

S-VIDEO

VCR

AV cable

Connecting a VCR for Recording

The S-video terminal share the same audio jacks with video2 and has priority over the video2 jack.

Use AV cables to connect the VCR’s AV input jacks to the TV’s VCR output jacks.

VCR for Recording

S-VIDEO

AV cable

Cables are often color-coded to connectors. Connect red to red, white to white, etc.

Only analog TV programs, AV1and AV2 input sources can be output through the AV output jacks.

Connecting the TV

Using External Equipment

Connecting a DVD Player with Component Video Connectors

Use a component video cable to connect the DVD player’s YPbPr jacks to the TV’s YPbPr jacks. Use an audio cable to connect the DVD player’s AUDIO OUT jacks to the TV’s AUDIO IN jacks. Be sure to use the same row of inputs that you used for the video connection.

Component video cable

HDMI INPUT

D - Sub/D VI AUDIO IN PUT

D-Su b INPUT ( )

PC/DTV I NPUT

RS-2 32

COMP ONENT

Audio cable

DVD Player

Connecting a DVD Player with S-Video and Audio Connectors

Cables are often color-coded to connectors. Connect red to red, white to white, etc.

S- VID EO

VIDEO

2 1

The YPbPr jacks on your DVD player are sometimes labeled YCbCr, or Y, B-Y and R-Y. If so, connect the cables to like colors.

Use an AV cable to connect the DVD player’s AUDIO OUT jacks to the TV’s AUDIO IN jacks. Use a S-VIDEO cable to connect the DVD player’s S-VIDEO OUT jack to the TV’s S-VIDEO IN jack.

S-VIDEO cable

DVD Player

AV cable

Cables are often color-coded to connectors. Connect red to red, white to white, etc.

If your DVD player is not equipped with S-VIDEO, use a VIDEO cable (yellow) instead of the S-VIDEO cable.

Using External Equipment

Connecting a PC

Connecting the TV

If you connect your PC to the TV, you can watch your personal computer’s display on the TV. When your PC is connected to the TV with the D-Sub cable and audio cable, you can view and listen to the PC’s video and audio output on the TV.

HDMI INPUT

D - Sub/D VI AUDIO IN PUT

D-Su b INPUT

( )

PC/DTV I NPUT

RS-2 32

COMP ONENT

D-Sub cable

(analog RGB)

Audio cable (stereo mini plugs)

To monitor port

(15-pin D-Sub)

To audio output jack

Connecting a Camcorder or “PlayStation”

S- VID EO

VIDEO

2 1

Use an AV cable to connect the camcorder or “PlayStation” AV output jacks to the TV’s AV input jacks.

Camcorder “PlayStation”

AV cable

Cables are often color-coded to connectors. Connect red to red, white to white, etc.

Connecting the TV

Using External Equipment

Connecting a Second TV or Monitor

The TV has a special signal output capability which allows you to hook up a second TV or monitor. Connect the second TV or monitor to the TV’s VCR output jacks. See the Operating Manual of the second TV or monitor for further details regarding that device’s input settings.

Second TV

or Monitor

AV cable

Cables are often color-coded to connectors. Connect red to red, white to white, etc.

Only analog TV programs, AV1and AV2 input sources can be output through the AV output jacks.

Connecting Headphones

Insert the plug of the headphone into the TV’s Headphone jack. When using headphones, adjust the headphone volume so as to avoid excessive levels, as hearing damage may result.

Headphones

If your headphones do not match the jack, use a suitable plug adaptor.

Introducing the Remote Control

Insert Batteries into the Remote Control

Insert two size AA batteries by matching the and on the batteries to the diagram inside the battery compartment.

1 2

Precaution on battery use

Improper use of batteries can result in a leakage of chemicals and/or explosion. Be sure to follow the instructions below.

= Place batteries with their terminals corresponding to the (+) and (–) indications. = Different types of batteries have different characteristics. Do not mix batteries

of different types.

= Do not mix old and new batteries. Mixing old and new batteries can shorten the

life of new batteries and/or cause old batteries to leak chemicals.

= Remove batteries as soon as they are non-operable. Chemicals that leak from

batteries can cause a rash. If chemical leakage is found, wipe with a cloth.

= The batteries supplied with the product may have a shorter life expectancy due

to storage conditions.

= If the remote control is not used for an extended period of time, remove the

batteries from the remote control.

Using the Remote Control

Use the remote control by pointing it towards the remote sensor window of the set. Objects between the remote control and sensor window may prevent proper operation.

Cautions regarding use of remote control

= Do not expose the remote control to shock. In addition, do

not expose the remote control to liquids, and do not place in an area with high humidity.

= Do not install or place the remote control under direct

sunlight. The heat may cause deformation of the unit.

= The remote control may not work properly if the remote

sensor window of the main unit is under direct sunlight or strong lighting. In such a case, change the angle of the lighting or TV set, or operate the remote control closer to the remote sensor window.

This above illustration is for reference only. The remote sensor may be in different locations on different models.

Introducing the Remote Control

Button Descriptions

5 6

Button Description

POWER Turn the unit on or off.

AUX, DVD,

CBL, TV

To select additional products to be controlled with remote control.

This remote control is an universal remote control. If your remote control does not work correctly when you operate the unit, please try to press TV button.

0-9 number

buttons

INPUT

Use these number buttons to select channel or input password.

To display the INPUT source list or to quickly select input source.

Dash (-)

To enter a program number for multiple program channels such as 2-1,2-2, etc.

FLASHBACK

To switch between the currently tuned channel and the previously tuned channel.

CH+, CH-

VOL+, VOL-

MUTE

To select channels upward or downward.

To adjust volume.

To mute the sound.

MTS/SAP

ZOOM CCD SLEEP

LIST

FAVORITE

PIP

P.POSITION SWAP FREEZE

AUDIO

PICTURE

INFO

▲,▼,

◄, ►,

GUIDE

EXIT

To access the Menu main page.

To access the program guide.

To move upward or downward in menu operation;

To move left or right in menu operation; To adjust selected menu item in menu operation;

To confirm or alter the settings of the selected menu item.

To access the program guide.

To exit menu.

Introducing the Remote Control

Button Descriptions

Button Description

ZOOM

CCD

MTS/SAP

To select a screen aspect ratio.

To select closed caption mode.

To select a stereo, sap or mono for analog channels; also used to select audio track for digital channels.

SLEEP

LIST

PICTURE

FREEZE

FAVORITE

To set sleep timer.

To access the master channel list.

To select a preset picture mode.

To freeze current picture.

To access the favorite channel list and select from 3 different favorite lists.

AUDIO

To select a preset sound mode.

MTS/SAP

ZOOM CCD SLEEP

17 18

LIST

FAVORITE

PIP

P.POSITION SWAP FREEZE

AUDIO

PICTURE

Getting Start

Running Initial Setup

Perform the following steps before you press POWER on the remote control to turn on your TV set.

1. Insert the batteries into the remote control unit.

2. Connect the antenna cable to the TV.

3. Plug in the AC power cord to the AC outlet.

After you finish connecting the TV, you can run the Initial Setup to create a list of available analog and digital channels. The Initial Setup screen appears when you turn on the TV for the first time after purchase. We strongly recommend you to perform initial setup according to the steps below.

Setting Language

Press ▲/▼ to select the desired language listed on the screen, and then press OK to confirm and continue.

Setting Time Zone

Press ▲/▼ to select a proper time zone according to your area, and then press OK to confirm and continue. If you want to return to previous screen, please highlight [GO BACK] item and press OK to return.

Setting Daylight Saving

Press ▲/▼ to highlight [Yes] item if you want to observe daylight saving, or you may select [No] to abandon daylight saving and then press OK to confirm and continue. If you want to return to previous screen, please highlight [GO BACK] item and press OK to return.

Selecting RF Input Source

Press ▲/▼ to select [Antenna] or [Cable] according to what kind of connection is made with your TV, and then press OK to confirm and continue. If you choose [Antenna], the TV starts Auto Program automatically. If you choose [Cable], there are 3 kinds of CATV system, including STD, HRC and IRC. Select the one matches to your TV. Select [Automatic] when you do not know which one to select. When you select [Automatic], the unit automatically detects the type of your cable system. If the unit fails to detect the type of your cable system, please consult with your cable TV company about the type of your cable system, and then choose the correct type before Auto Program. If you want to return to previous screen, please highlight [GO BACK] item and press OK to return.

Start Auto Program...

Once you have finished selecting RF input source, the unit starts auto program. Auto Program may take a while to complete. A progress bar is displayed while available channels are being scanned. If you select [Stop Scan] to cancel the Auto Program before all receivable channels are scanned, you need to run Auto Program at a later time. Auto Program will create a list of receivable channels for the current input . You will be required to run Auto Program for RF input to create a list of available channels.

Welcome!

Use the Up and Down arrows on your Remote Control and Select the language you want to use for menus and message screens.

Press OK to continue in English

English Français Español

Time Zone

Use the Up and Down arrows and press Select on your Time Zone.

GO BACK

Press OK to continue

Alaska (US) Hawaii (US)

Pacific (US, CAN) Mountain (US, CAN) Central (US, CAN) Eastern (US, CAN)

Daylight Saving

Do you observe Daylight Saving?

GO BACK

Press OK to continue

Yes No

RF Input Source

Select the source for your television signal.

GO BACK

Press OK to continue

Antenna Cable

Scanning Channels

Signal

2.0

Channels Found Digital: 3 Analog:3

Stop Scan

Scanning may take a few minutes - Please be patient

2.1

2.2

3.0

4.0

4.1

(Example)

Getting Start

Setting a Secret Number

For additional protection to your TV and the user's settings from being accidentally changed, we recommend you to set a secret number firstly as below.

1. Press MENU.................

New PIN

Enter New PIN:

Confirm New PIN:

2. Highlight [Locks]...........

Use or button.

Picture Audio

Settings Channels

3. Press OK......................

Locks

Press a Number to enter digit

Guide

The TV allows you to set a secret number when you access the [Locks] menu first time. You may use 0-9 number buttons to enter a new four-digit secret number, and then confirm the new secret number by entering it again.

Once the secret number is set successfully, the TV requests you to enter secret number if you are going to:

= Access to the [Locks] menu. = Scan channels automatically. = Find channel manually. = View a blocked program. = Reset all settings to defaults by using the [RESET ALL] item in [Settings] menu.

The secret number is very important, please keep it carefully. As a precautionary measure, make a note of your secret number and keep it in a familiar place.

Menu Navigation

Press to display the Main menu.

Press to highlight the menu items.

Picture Settings Screen Settings Aspect Ratio Color Temperature Cinemotion 3D Comb Filter Temporal NR HDMI Conversion RESET PICTURE

OFF

Press to enter the sub-menu field.

Press to select items in the submenu.

Picture

Audio Settings

Channels Locks Guide

Press to adjust the selected items or move the on-screen cursor in the sub-menu.

Press to confirm your operation or alter the settings for some items such as [Cinemotion].

Press to return to previous screen.

Press to return to normal picture.

Watching TV

Turning On/Off

Never attempt to move the TV unless the AC power cord has been disconnected.

Introducing Channel Number

Turning On

Firstly, Plug in the AC power cord to the AC outlet. Press POWER on the TV or press POWER on the remote control.

The initial setup starts when the TV powers on for the first time. If the TV has been turned on before, it displays current input signal directly.

Turning Off

Press POWER on the TV or press POWER on the remote control. The TV enters standby mode and the image on the screen disappears.

The TV will still consume some power as long as the AC power cord is still inserted into the wall outlet.

If you are not going to use this TV for a long period of time, be sure to remove the AC power cord from the power outlet.

This television is capable of receiving the full range of cable-TV channels available today, from the most digital and HDTV channels, to the traditional analog channels. As the transition toward full digital TV continues, some cable-TV systems in the USA will have a mixture of analog and digital channels in their lineups. So i situations the ATSC PSIP channel number is composed of a m number and a minor channel number. both analog and digital channels (It is equal to the NTSC channel number for existing broadcasters). An analog channel usually has a minor channel number of zero, while a digital channel usually has a minor channel number of 1, 2 or larger.

The major channel number is same for

n most

ajor channel

Selecting Channels

You can select analog channels in serveral ways.

Method 1 - Using CH+ or CH- on the remote control or on the TV

Press the CH+ or CH- to cycle among all available channels. Only those channels marked with a tick symbol can be selected by the CH+ or CH- button.

Method 2 - Using FLASHBACK on the remote control

Press FLASHBACK to switch to the previously tuned channel. Press FLASHBACK again to switch back to the currently tuned channel.

Method 3 - Using 0-9 and OK on the remote control

For analog TV channels

Press the 0-9 number buttons to input a channel number and confirm with OK to select up to 125 channels for VHF/UHF/CATV.

Selecting Channels

Watching TV

For digital TV channel

Press the 0-9 number buttons and dash(-) to input a digital channel number, the TV goes to the selected channel directly. (e. g., channel 8-3, just press 8, - and 3 one by one)

If you enter channel number with 0-9 only (without pressing OK), channel selection will be made if there is no operation for a few seconds.

Adjusting Volume

Using FREEZE button

Method 4 - Using master channel list

Press the LIST button to display the master channel list, you may select channel with the ▲▼and OK buttons.

Method 5 - Using favorite channel list

Press the FAVORITE button to display a desired favorite channel list, you may select channel with the ▲▼and OK buttons.

Using VOL+ or VOL- on the remote control or on the TV

Press the VOL+ or VOL- to increase or decrease the volume.

Using MUTE on the remote control

Press MUTE to mute the sound. Press it again to cancel the mute.

Press FREEZE to temporarily capture a program's picture. You can use this feature to write down information such as phone numbers, recipes, etc. You may press any key to cancel FREEZE and return to normal viewing.

LIST

FAVORITE

FREEZE

Using ZOOM button

The zoom mode options may differ from different formats of the input signal.

The TV automatically cancel FREEZE and return to normal viewing in about a minute.

Press ZOOM repeatedly to choose a proper screen aspect

ZOOM

ratio. The following mode may available for your choice.

Normal

Select to match the source’s image.( 4:3 to 4:3, 16:9 to 16:9)

Normal

Example:

Source

Final

When you choose NORMAL to view a 4:3 program, two black bars keep on the two sides of the screen. For additional protection to the screen, when you are viewing a 4:3 program, please DO NOT use the NORMAL feature for a long period of time.

Watching TV

Using ZOOM button

Direct

Select to detect the resolution of the signal and display an image with the same number of pixels on the screen.

Direct

Example:

Source

Full Screen

Select to enlarge the 4:3 picture horizontally only, to fill the display area.

Full Screen

Example:

Source

Panoramic

Select to enlarge the 4:3 picture to fill the 16:9 screen, keeping the original image as much as possible.

Final

Panoramic

Example:

Source

ZOOM 1

Select to enlarge the picture horizontally and vertically to an equal aspect ratio that fills the wide screen.

ZOOM 1

Example:

Source

ZOOM 2

Select to view wide-screen DVDs in full screen.

ZOOM 2

Example:

Source

Final

Adjusting MENU Options

Depending on the signal tuned, you may see different MENU options on your screen. As an example, Menus displayed below are based on TV mode.

Picture Control

Accessing Picture Menu

1. Press MENU.................

Picture Settings Screen Settings Aspect Ratio Color Temperature Cinemotion 3D Comb Filter Temporal NR HDMI Conversion RESET PICTURE

OFF

2. Highlight [Picture].........

Use or button.

3. Press OK......................

Picture

Audio Settings

Channels Locks Guide

To highlight an option and to change settings, press ▲▼◄ ►. Press OK to confirm the selection or alter the settings. Press EXIT to exit.

Selecting Picture Options

Option Description

Picture Settings

Select to access a picture adjustment window, see [Adjusting Picture Settings] on next page.

Screen Settings

Select to access a screen adjustment window for VGA or Component input, see [Adjusting Screen Settings] on next page.

To quickly change the aspect ratio, press the ZOOM button repeatedly.

Aspect Ratio

Select to access a window in which you can choose a proper aspect ratio for 4:3 or 16:9 program. Select from [Normal], [Direct], [Full Screen], [Panoramic], [ZOOM 1] and [ZOOM 2].

Color Temperature

Cinemotion

Choose from the following color temperatures:

Cool

Neutral

Warm

Select to give the white colors a blue tint. Select to give the white colors a neutral tint. Select to give the white colors a red tint.

Select [ON] to optimize the screen display automatically detecting film content and applying a reverse 3-2 pull down process. Moving picture will appear clearer and more natural looking. Select [OFF] to disable the detection.

3D Comb Filter

Select to provides high quality images with minimal dot crawl and cross color noise. Select from [Off], [Low], [Medium] and [High].

Temporal NR

(Analog)

HDMI Conversion

RESET PICTURE

Select to reduce the noise level of connected equipment. This also reduces the noise level to the signal from the RF jack. Select from [Off], [Low], [Medium] and [High].

Select to change color space for some irregular HDMI signal. Select [ON] when you find abnormal color while viewing HDMI programs. Be sure to select [OFF] for normal HDMI signal.

Select to reset picture settings and adjustments to the defaults.

Adjusting MENU Options

Picture Control

Adjusting Picture Settings

Picture Settings: TV

Preset Brightness Contrast Saturation Tint Sharpness

DONE

Choose among different preset adjustments for your TV picture

Custom

25 25 25 25 4

Option Description

Preset

Select to choose a picture mode to best match environment of the TV, which can vary due to factors like room brightness, type of program watched or the type of image input from external equipment.

Standard Vivid Movie Pro Custom

Select for a highly defined image in a normally bright room.

Select for enhanced picture contrast and sharpness. Select for a movie. Select for a normal picture.

Select to customize the picture as desired.

To quickly change the picture mode, press the PICTURE button repeatedly.

Brightness

Contrast

Saturation

Tint

Sharpness

Select to adjust picture brightness.

Select to adjust picture contrast.

Select to adjust color saturation for current picture.

Select to adjust natural flesh tones.

Select to adjust clarity of outline detail.

Adjusting Screen Settings

Adjustment Settings Horizontal Vertical Phase

Use left and right arrows to change horizontal position

0 0

Auto Sync

DONE

Option Description

Horizontal

Vertical

Phase

Select to adjust horizontal position for the image.

Select to adjust vertical position for the image.

Adjust when characters have low contrast or when the image flickers.

Auto Sync

Select to automatically adjust the PC image.

The [Screen Settings] window can't be accessed unless the TV works in D-Sub or Component mode.

In Component mode, the [Auto Sync] item is unavailable. In Component mode, when the unit receives 480i signal, the [Vertical] item is

ineffective unless its value is larger than 0. Please do not adjust the [Vertical] item to a negative value.

Audio Control

Accessing Audio Menu

1. Press MENU.................

Adjusting MENU Options

Bass, Treble & Balance Phone Settings Effects Auto Volume Control COAX Out (SPDIF) Analog Preference Digital Preference TV Speaker RESET AUDIO

OFF

2. Highlight [Audio].........

Use or button.

3. Press OK......................

Picture

Audio

Settings Channels

Locks Guide

To highlight an option and to change settings, press ▲▼◄ ►. Press OK to confirm the selection or alter the settings. Press EXIT to exit.

Selecting Audio Options

Option Description

Bass, Treble & Balance

Phone Settings

Select to access an audio adjustment window.

Bass Treble Balance

Select to access a phone settings window. All adjustments in

Adjust to increase or decrease lower-pitched sounds.

Adjust to increase or decrease higher-pitched sounds.

Adjust to emphasize left or right speaker balance.

this window have an effect on the headphone only.

Adjust to increase or decrease phone volume.

Adjust to increase or decrease lower-pitched sounds.

Adjust to increase or decrease higher-pitched sounds.

Adjust to emphasize left or right speaker balance.

Select to turn off the sound effect. Select for a concert program. Select for a movie program. Select for a music program. Select for a spoken dialog program. Select to equalize overall volume levels across all channels. Select to turn off Auto Volume Control. Select to output audio signal as its original format.

Select to output audio signal by PCM form.

To quickly change the audio mode, press the AUD I O button repeatedly.

Effects

Auto Volume Control

COAX Out (SPDIF)

Volume Bass Treble Balance None Hall

Theater

Music Speech

ON OFF AUTO

PCM

For analog channels, you may use the MTS/SAP button to cycle through the Multi-channel TV Sound options. For digital channels, you may use the MTS/SAP button to quickly select audio track if available.

Analog Preference

Digital Preference

TV Speaker RESET AUDIO

Use this item to select a stereo mode as a default mode when you switch your TV to a analog program. Select from [Mono], [Stereo] and [SAP].

Mono

Stereo

SAP

Select for mono reception. Use to reduce noise during weak stereo broadcasts.

Select for stereo reception when viewing a program broadcast in stereo.

Select to automatically switch the TV to second audio programs when a signal is received. If no SAP signal is present, the TV remains in Stereo mode.

Use this item to select a language as a default language when you switch your TV to a digital program.

Select to turn the TV speakers ON or OFF. Select to reset audio settings to the defaults.

+ 80 hidden pages