FOR ASSISTANCE CALL CUSTOMER SERVICE AT 1-800-645-4994
OR VISIT US AT WWW. AUDIOVOX.COM
PLV31260CS10 / AUDIOVOX
I/B 811-312691W070 <English>
SIZE : 148 X 210MM
MATERIAL : 80g WOODSFREE PAPER
128-8305
Printed in China
811-312691W070
SAFETY PRECAUTIONS
WARNING : TO REDUCE THE RISK OF
ELECTRIC SHOCK, DO NOT REMOVE COVER
(OR BACK). NO USERSERVICEABLE PARTS
INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
The lightning flash with arrowhead symbol,
within an equilateral triangle, is intended to
alert the user to the presence of uninsulated
“dangerous voltage” within the product’s enclosure
that may be of sufficient magnitude to constitute a
risk of electric shock to persons.
The exclamation point within an equilateral
triangle is intended to alert the user to the
presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the appliance.
This product
contains a low
power laser device.
INVISIBLE LASER RADIATION WHEN UNIT IS
OPENED AND INTERLOCKS ARE DEFECTED.
AVOID EXPOSURE T O LASER BEAM.
CAUTION
• DANGER OF EXPLOSION IF BATTERY IS
INCORRECTLY REPLACED. REPLACE ONLY
WITH THE SAME OR EQUIV ALENT TYPE.
• TO PREVENT ELECTRIC SHOCK, MATCH
WIDE BLADE OF PLUG TO WIDE SLOT OF
WALL OUTLET, THEN FULLY INSERT.
• USE OF CONTROLS OR ADJUSTMENTS OR
PERFORMANCE OF PROCEDURES OTHER
THAN THOSE SPECIFIED MAY RESULT IN
HAZARDOUS RADIA TION EXPOSURE.
WARNING :
• TO PREVENT FIRE OR SHOCK HAZARD, DO
NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.
DO NOT PLACE OBJECTS FILLED WITH LIQUIDS
ON OR NEAR THIS UNIT .
• SHOULD ANY TROUBLE OCCUR, DISCONNECT
THE AC POWER CORD AND REFER SERVICING
TO A QUALIFIED TECHNICIAN.
CAUTION
The symbol for Class II
(Double Insulation)
CLASS 1 LASER PRODUCT
APPAREIL À LASER DE CLASSE 1
PLACEMENT INFORMA TION
• Do not use this unit in places which are
extremely hot, cold, dusty or humid.
• Do not restrict the air flow of this unit by placing
it somewhere with poor air flow, by covering it
with a cloth, by placing it on bedding or carpeting.
SAFETY INFORMA TION
• When connecting or disconnecting the AC
power cord, grip the plug and not the cord itself.
Pulling the cord may damage it and create a
hazard.
• When you are not going to use the unit for a
long period of time, disconnect the AC power
cord.
CONDENSATION INFORMA TION
• When left in a heated room where it is warm
and damp, water droplets or condensation may
form inside the equipment. When there is
condensation inside the unit, the unit may not
function normally . Let the unit stand for 1-2 hours
before turning the power on or gradually heat
the room and let the unit dry before use.
RA TING PLATE LOCA TION
The rating plate is located on the rear of unit.
FCC ST A TEMENTS
NOTE: This unit has been tested and found to
comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection
against harmful interference in a residential
installation. This unit generates, uses and can
radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may
cause harmful interference to radio
communication. However, there is not guarantee
that interference will not occur in a particular
installation. If this unit does cause harmful
interference to radio or television reception, which
can be determined by turning the unit off and on,
the user is encouraged to try to correct the
interference by one or more of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the unit and
receiver.
- Connect the unit into an outlet on a circuit
different from that to which the receiver is
connected.
- Consult the dealer or an experienced radio/TV
technician for help.
WARNING: Changes or modifications to this unit
not expressly approved by party responsible for
compliance could void the user authority to operate
the unit.
E - 1
FPE2608DV_ib_eng_1-16.pmd1/15/2008, 12:42 PM1
IMPORTANT SAFETY INSTRUCTIONS
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with a dry cloth.
7) Do not block any ventilation openings.
Install in accordance with the
manufacturer’s instructions.
8) Do not install near any heat sources
such as radiators, heat registers,
stoves, or other apparatus (Including
amplifiers) that produce heat.
9) Do not defect the safety purpose of the
polarized or grounding-type plug. A
polarized plug has two blades with one
wider than the other. A grounding type
plug has two blades and a third
grounding prong. The wide blade or the
third prong is provided for your safety.
If the provided plug does not fit into your
wall outlet, consult an electrician for
replacement of the obsolete outlet.
10) Protect the power cord from being
walked on or pinched particularly at
MAINTENANCE
plugs, convenience receptacles, and the
point where they exit from the
apparatus.
11) Only use attachments / accessories
specified by the manufacturer.
12) Use only with the cart, stand,
tripod, bracket, or table
specified by the
manufacturer, or sold with
the apparatus. When a cart is
used, use caution when moving the cart
/ apparatus combination to avoid injury
from tip-over.
13) Unplug this apparatus during lightning
storms or when unused for long
periods of time.
14) Refer all servicing to qualified service
personnel. Servicing is required when
the apparatus has been damaged in any
way, such as the power cord or plug is
damaged, liquid has been spilled or
objects have fallen into the apparatus,
the apparatus has been exposed to rain
or moisture, does not operate normally,
or has been dropped.
CLEANING THE DISC
A defective or dirty disc inserted into the unit can cause sound to drop out during
playback.
Handle the disc by holding its inner and outer edges.
• Do NOT touch the surface of the unlabeled side of the disc.
• Do NOT stick paper or tape on the surface of the disc.
• Do NOT expose the disc to direct sunlight or excessive heat.
• Clean the disc before playback. Wipe the disc from the center outward with a cleaning cloth.
• NEVER use solvents such as benzene or alcohol to clean the disc.
• Do NOT use irregular shaped discs (for example : heart shaped, octagonal, etc.). They may cause
malfunctions.
CLEANING THE UNIT
• Be sure to turn the unit off and disconnect the AC power cord before cleaning the unit.
• Wipe the unit with a dry soft cloth. If the surfaces are extremely dirty, wipe clean with a cloth which
has been dipped in a weak soap-and-water solution and wrung out thoroughly. Then wipe it with a
dry cloth.
• Never use alcohol, benzene, paint-thinner, cleaning fluid or other chemicals. Do NOT use compressed
air to remove dust.
IMPORT ANT NOTE
Before shipping the unit, remove the disc from the disc compartment.
Language Setup ....................................... 28
Video Setup .............................................. 28
System Setup ........................................... 28
TROUBLESHOOTING GUIDE ....................... 29
FPE2608DV_ib_eng_1-16.pmd1/15/2008, 12:42 PM3
E - 3
DISC FORMA TS
Track 1Track 2Track 3Track 4Track 5
NOTES ON COPYRIGHT
It is forbidden by law to copy, broadcast, show,
broadcast on cable, play in public or rent
copyrighted material without permission.
Apparatus Claims of U.S. Patent Nos. 4,907,093;
5,315,448 and 6,516,132 licensed for limited
viewing uses only.
DVDs are copy protected, and any recordings
made from these discs will be distorted. This
product incorporates copyright protection
technology that is protected by method claims of
certain U.S. patents and other intellectual property
rights owned by Macrovision Corporation and
other rights owners. Use of this copyright
protection technology must be authorized by
Macrovision Corporation, and is intended for home
and other limited viewing uses only, unless
otherwise authorized by Macrovision Corporation.
Reverse engineering or disassembly is prohibited.
The unit can play:
DVDs [8cm/
12cm disc]
Audio CDs
[8cm/12cm disc]
CD-R CD-RW
Compatible
REGION MANAGEMENT INFORMA TION
Region Management Information: This unit is
designed and manufactured to respond to the
Region Management Information that is encoded
on DVDs. If the region number printed on the DVD
does not correspond to the region number of this
unit, this unit cannot play that disc.
ICONS USED ON DVDs
Sample Icons:
1. English
2
2. French
1. English
2
2. French
LB
2
1
Language selections for audio
Language selections for subtitles
Screen aspect ratio
Multiple camera angles
Region code indicator
NOTE
When playing back a CD-G (Graphics) or CD
EXTRA disc, the audio portion will be played, but
the graphic images will not be shown.
TITLES, CHAPTERS AND TRACKS
• DVDs are divided into “TITLES” and
“CHAPTERS”. If the disc has more than one
movie on it, each movie would be a separate
“TITLE”. “CHAPTERS” are sections of titles.
• Audio CDs are divided into “TRACKS”. A
“TRACK” is usually one song on an Audio CD.
The region number of this equipment is 1.
DISC FUNCTION OR OPERA TION THA T
IS NOT A V AILABLE
When the symbol appears on the screen, it
indicates that the function or operation attempted
is not available at that time. This occurs because
the DVD manufacturer determines the specific
functions. Certain functions may not be available
on some discs. Be sure to read the documentation
provided with the DVD.
FPE2608DV_ib_eng_1-16.pmd1/15/2008, 12:42 PM4
NOTE
Numbers identify each title, chapter and track on
a disc. Most discs have these numbers record on
them, but some do not.
NOTES ON UNAUTHORIZED DISCS
You may not be able to playback some DVDs on
this equipment if they were purchased from outside
your geographic area or made for business
purposes.
E - 4
ACCESSORIES
Please check and identify the supplied accessories.
Remote Control (with batteries) ................................................................................................. x 1
GETTING STARTED
USING THE REMOTE CONTROL
• Point the remote control at the remote sensor located on the unit.
• When there is a strong ambient light source, the performance of the infrared remote sensor may be
degraded, causing unreliable operation.
• The recommended effective distance for remote operation is about 16 feet (5 meters).
TO INSTA LL BA TTERIES
1. Open the battery door.2. Insert 2 “AAA” batteries.
+
_
_
+
BA TTERY REPLACEMENT
When the batteries become weak, the operating distance of the remote control is greatly reduced and
you will need to replace the batteries.
CAUTION:
Danger of explosion if battery is incorrectly replaced.
NOTES
• If the remote control is not going to be used for a long time, remove the batteries to avoid damage
caused by battery leakage corrosion.
• Do not mix old and new batteries. Do not mix ALKALINE, standard (CARBON-ZINC) or rechargeable
(NICKEL-CADMIUM) batteries.
• Always remove batteries as soon as they become weak.
• Weak batteries can leak and severely damage the remote control.
• WARNING : Do not dispose of batteries in a fire. Batteries may explode or leak.
WARNING : Do not dispose of batteries in a fire. Batteries may explode or leak.
Many universal remote controls have a “learning” feature. We recommend you use that feature to
program the remote control.
For any questions or problems related to programming a universal remote control, you must contact the
customer service department of the universal remote control manufacturer for assistance, or refer to
the instructions included with the universal remote control. We cannot offer assistance in programming
universal remote controls.
E - 5
FPE2608DV_ib_eng_1-16.pmd1/15/2008, 12:42 PM5
CONTROL REFERENCE GUIDE
REMOTE CONTROL
1. STANDBY / ON button
Press to turn ON the unit or put it in
STANDBY (OFF) mode.
2. TV button
Press to switch to TV mode.
DVD button
Press to switch to DVD mode.
AV button
Press to switch to source connected to
AV1 / AV2 (composite) input.
HD button
Press to switch to source connected to
YUV in / HDMI 1 / HDMI 2 (component)
inputs.
3. Number (0 - 9) buttons
4. • [dot] button
Use to enter digital sub-channels. (i.e.
11.3 or 12.7)
5. MENU button
Press to display the on-screen TV menu.
6. VOLUME (- / +) buttons
Press to adjust the volume level.
7. CURSOR (
Press to highlight selections on a menu
screen and adjust certain settings.
ENTER button
Press to confirm selections on a menu
screen.
8. / buttons
: Fast reverse playback.
: Fast forward playback.
9. PREV button
Press to select previous chapters or
tracks on a disc.
10. SUBTITLE button
Press to select one of the subtitle
languages programmed on a DVD.
11. ANGLE button
Press to switch the camera angle of the
video presentation when scenes with
multiple camera angles are recorded on
a DVD.
12. TITLE button
Press to show the Title menu.
13. GOTO button
Press to skip directly to a specific location
on a DVD/CD.
14. MEMORY button
Press to set predetermined playback.
CLEAR button
Press to clear input selections.
15.MTS button
Press to switch between MONO sound,
STEREO sound and Secondary Audio
Program (SAP).
CC button
Press to activate the Closed Captioning
feature. This function only works on
programs broadcasted with captions.
16. EXIT button
Press to exit the TV SETUP menu and
return directly to normal viewing.
SLEEP button
Press to set the SLEEP timer. The unit
will remain on for the time that is set, and
will automatically shut off afterwards.
E - 6
, , , ) buttons
FPE2608DV_ib_eng_1-16.pmd1/15/2008, 12:42 PM6
CONTROL REFERENCE GUIDE
REMOTE CONTROL
17.FUNCTION button
Press to switch between TV / AV 1 / A V 2 /
YUV in / DVD / HDMI 1 / HDMI 2 / PC in.
18. LAST CH button
Press to switch repeatedly between the
last two channels displayed.
19.MUTE
Press to turn off the sound.
20.CH / CH buttons
Press/ to change the channels.
21. NEXT button
Press to select the next title, chapter or
track on a disc.
button
22.
button
Press to stop playing a disc.
Press to go to a folder list of picture file
list.
PLA Y button
Press to start and resume playback of a
disc.
PAUSE button
Press to pause playback and single
frame advance.
23. AUDIO button
Press to select audio soundtracks on a
DVD or change the output mode of a CD.
24. SLOW button
Press to perform slow forward playback
of a DVD.
25. DVD MENU button
Press to enter the main menu of the DVD.
26. SETUP button
Press to enter and exit the SETUP menu
of the DVD.
27. A-B button
Press to perform point-to-point repeat
playback on a DVD or CD.
REPEAT button
Press to repeat a chapter or title of a DVD.
Press to repeat a single track or whole
CD.
28. DISPLAY button
Press to change disc status information
displayed on the screen.
SOUND button
Press to select from preset sound
settings to match the type of show you
are watching. (Standard / Personal /
Theater / Voice / Music)
29. LCD MODE button
Press to set size of LCD display.
PICTURE button
Select from preset screen display
settings to match the type of show you
are watching. (Personal / Soft / Movie /
Standard / Dynamic)
FPE2608DV_ib_eng_1-16.pmd1/15/2008, 12:42 PM7
E - 7
CONTROL REFERENCE GUIDE
FRONT & SIDE VIEWS
1. STD.BY / ON button
Turns the unit on and off.
2. MENU button
Enters the on-screen TV menu.
3. FUNCTION button
Selects TV / AV 1 / AV 2 / YUV in / DVD /
HDMI 1 / HDMI 2 / PC in.
4.CH buttons
Confirms selections on the TV menu
screen and changes the TV channels.
5. - VOL + controls
Adjusts the volume level.
6. Removable stand
7. Color LCD screen
8. PLA Y button
Starts and resumes playback of a disc.
STOP button
Stops playing a disc.
PAUSE button
Pauses playback and single frame
advance.
PREV button
Goes back to previous chapters / tracks.
Performs fast reverse playback.
NEXT button
Advances chapters / tracks.
Performs fast forward playback.
OPEN / CLOSE button
Opens and closes the disc door.
9. Remote sensor
Receives the remote control signal.
Standby indicator
10. Speaker
11. DVD door
E - 8
FPE2608DV_ib_eng_1-16.pmd1/15/2008, 12:42 PM8
REAR VIEW
CONTROL REFERENCE GUIDE
12
13
20
21
22
23
24
25
12.AUDIO IN (Left/Right) jacks (A V IN 2)
13.VIDEO IN jack (A V IN 2)
14.VIDEO IN jack (A V IN 1)
15.Headphones jack
16. TV ANTENNA terminal
17.AUDIO IN (Left / Right) jacks (A V IN 1)
18.S-VIDEO IN jack (A V IN 1)
19.AUDIO IN (Left / Right) jacks (YUV IN)
14
15
16
17
18
19
20.VIDEO / AUDIO OUT (Left / Right) jacks
(AV OUT)