Audiovox FPE2608 User Manual

FPE2608

26” HD FLAT PANEL LCD TV

OWNER'S MANUAL

FOR ASSISTANCE CALL CUSTOMER SERVICE AT 1-800-645-4994
OR VISIT US AT WWW. AUDIOVOX.COM

PLV36260CS10 / AUDIOVOX
I/B 811-362691W080 <English>
SIZE : 148 X 210MM
MATERIAL : 80g WOODSFREE PAPER

128-8307

Printed in China

811-362691W080

SAFETY PRECAUTIONS

PLACEMENT INFORMA TION

• Do not use this unit in places which are
extremely hot, cold, dusty or humid.

• Do not restrict the air flow of this unit by placing
it somewhere with poor air flow, by covering it
with a cloth, by placing it on bedding or carpeting.

WARNING : TO REDUCE THE RISK OF
ELECTRIC SHOCK, DO NOT REMOVE COVER
(OR BACK). NO USERSERVICEABLE PARTS
INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.

The lightning flash with arrowhead symbol,
within an equilateral triangle, is intended to

alert the user to the presence of uninsulated
“dangerous voltage” within the product’s enclosure
that may be of sufficient magnitude to constitute a
risk of electric shock to persons.

The exclamation point within an equilateral
triangle is intended to alert the user to the

presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the appliance.

The symbol for Class II
(Double Insulation)

CAUTION

• DANGER OF EXPLOSION IF BATTERY IS

INCORRECTLY REPLACED. REPLACE ONLY
WITH THE SAME OR EQUIV ALENT TYPE.

• TO PREVENT ELECTRIC SHOCK, MATCH

WIDE BLADE OF PLUG TO WIDE SLOT OF
WALL OUTLET, THEN FULLY INSERT.

• USE OF CONTROLS OR ADJUSTMENTS OR

PERFORMANCE OF PROCEDURES OTHER
THAN THOSE SPECIFIED MAY RESULT IN
HAZARDOUS RADIA TION EXPOSURE.

WARNING :

• TO PREVENT FIRE OR SHOCK HAZARD, DO

NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.
DO NOT PLACE OBJECTS FILLED WITH LIQUIDS
ON OR NEAR THIS UNIT .

• SHOULD ANY TROUBLE OCCUR, DISCONNECT

THE AC POWER CORD AND REFER SERVICING
TO A QUALIFIED TECHNICIAN.

WARNING: Changes or modifications to this unit
not expressly approved by party responsible for
compliance could void the user authority to operate
the unit.

SAFETY INFORMA TION

• When connecting or disconnecting the AC
power cord, grip the plug and not the cord itself.
Pulling the cord may damage it and create a
hazard.

• When you are not going to use the unit for a
long period of time, disconnect the AC power
cord.

CONDENSATION INFORMA TION

• When left in a heated room where it is warm
and damp, water droplets or condensation may
form inside the equipment. When there is
condensation inside the unit, the unit may not
function normally . Let the unit stand for 1-2 hours
before turning the power on or gradually heat
the room and let the unit dry before use.

RA TING PLATE LOCA TION

The rating plate is located on the rear of unit.

FCC ST A TEMENTS

NOTE: This unit has been tested and found to
comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection
against harmful interference in a residential
installation. This unit generates, uses and can
radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may
cause harmful interference to radio
communication. However, there is not guarantee
that interference will not occur in a particular
installation. If this unit does cause harmful
interference to radio or television reception, which
can be determined by turning the unit off and on,
the user is encouraged to try to correct the
interference by one or more of the following
measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the unit and
receiver.

- Connect the unit into an outlet on a circuit
different from that to which the receiver is
connected.

- Consult the dealer or an experienced radio/TV
technician for help.

E - 1

FPE2608_ib_eng_1-13.pmd 1/15/2008, 12:54 PM1

IMPORTANT SAFETY INSTRUCTIONS

1) Read these instructions.

2) Keep these instructions.

3) Heed all warnings.

4) Follow all instructions.

5) Do not use this apparatus near water.

6) Clean only with a dry cloth.

7) Do not block any ventilation openings.
Install in accordance with the
manufacturer’s instructions.

8) Do not install near any heat sources
such as radiators, heat registers,
stoves, or other apparatus (Including
amplifiers) that produce heat.

9) Do not defect the safety purpose of the
polarized or grounding-type plug. A
polarized plug has two blades with one
wider than the other. A grounding type
plug has two blades and a third
grounding prong. The wide blade or the
third prong is provided for your safety.
If the provided plug does not fit into your
wall outlet, consult an electrician for
replacement of the obsolete outlet.

10)Protect the power cord from being
walked on or pinched particularly at
plugs, convenience receptacles, and
the point where they exit from the
apparatus.

11)Only use attachments / accessories
specified by the manufacturer.

12)Use only with the cart, stand,
tripod, bracket, or table
specified by the
manufacturer, or sold with
the apparatus. When a cart is used, use
caution when moving the cart /
apparatus combination to avoid injury
from tip-over.

13)Unplug this apparatus during lightning
storms or when unused for long periods
of time.

14)Refer all servicing to qualified service
personnel. Servicing is required when
the apparatus has been damaged in any
way, such as the power cord or plug is
damaged, liquid has been spilled or
objects have fallen into the apparatus,
the apparatus has been exposed to rain
or moisture, does not operate normally,
or has been dropped.

FPE2608_ib_eng_1-13.pmd 1/15/2008, 12:54 PM2

E - 2

CONTENTS

SAFETY PRECAUTIONS .................................................................................................................... 1

IMPORTANT SAFETY INSTRUCTIONS ........................................................................................... 2

CONTENTS ......................................................................................................................................... 3

ACCESSORIES .................................................................................................................................. 4

GETTING STARTED ............................................................................................................... ............. 4

CONTROL REFERENCE GUIDE ................................................................................................... 5 - 7

CONNECTIONS .......................................................................................................................... 8 - 12

Connecting a TV Antenna / Cable / Satellite ................................................................................... 8

Connecting an A / V Device ............................................................................................................ 8

Connecting Devices with a Composite (Yellow RCA-Type) Video Output ...................................... 9

Connecting Devices with a Composite (Yellow RCA-Type) Video Input ......................................... 9

Connecting a High Definition (HD) Source .................................................................................... 10

Connecting a PC ........................................................................................................................... 10

Connecting HDMI ........................................................................................................................... 11

Connecting an Audio Amplifier ...................................................................................................... 11

Connecting the AC Power Cord ................................................................................................... 12

USING HEADPHONES .................................................................................................................... 12

INSTALLA TION ................................................................................................................................ 13

Removing the Base Stand ............................................................................................................ 13

Mounting on the Wall .................................................................................................................... 13

TV SETUP ................................................................................................................................ 14 - 19

Video Menu .................................................................................................................................. 14

Audio Menu .................................................................................................................................. 15

TV Menu ...................................................................................................................................... 16

Setup Menu ........................................................................................................................... 17 - 18

Parental Menu ....................................................................................................................... 18 - 19

TROUBLESHOOTING GUIDE .......................................................................................................... 20

FPE2608_ib_eng_1-13.pmd 1/15/2008, 12:54 PM3

E - 3

ACCESSORIES

Please check and identify the supplied accessories.

Remote Control (with batteries) ................................................................................................. x 1

GETTING STARTED

USING THE REMOTE CONTROL

• Point the remote control at the remote sensor located on the unit.

• When there is a strong ambient light source, the performance of the infrared remote sensor may be
degraded, causing unreliable operation.

• The recommended effective distance for remote operation is about 16 feet (5 meters).

TO INSTA LL BA TTERIES

1. Open the battery door. 2. Insert 2 “AAA” batteries.

+

_

_

+

BA TTERY REPLACEMENT

When the batteries become weak, the operating distance of the remote control is greatly reduced and
you will need to replace the batteries.

CAUTION:

Danger of explosion if battery is incorrectly replaced.

NOTES

• If the remote control is not going to be used for a long time, remove the batteries to avoid damage
caused by battery leakage corrosion.

• Do not mix old and new batteries. Do not mix ALKALINE, standard (CARBON-ZINC) or rechargeable
(NICKEL-CADMIUM) batteries.

• Always remove batteries as soon as they become weak.

• Weak batteries can leak and severely damage the remote control.

• WARNING : Do not dispose of batteries in a fire. Batteries may explode or leak.

WARNING : Do not dispose of batteries in a fire. Batteries may explode or leak.
Many universal remote controls have a “learning” feature. We recommend you use that feature to

program the remote control.
For any questions or problems related to programming a universal remote control, you must contact the

customer service department of the universal remote control manufacturer for assistance, or refer to
the instructions included with the universal remote control. We cannot offer assistance in programming
universal remote controls.

E - 4

FPE2608_ib_eng_1-13.pmd 1/15/2008, 12:54 PM4

CONTROL REFERENCE GUIDE

REMOTE CONTROL

1. STANDBY / ON button

Press to turn ON the unit or put it in
STANDBY (OFF) mode.

2. TV button

Press to switch to TV mode.

AV button

Press to switch to source connected to
AV 1 / AV 2 (composite) input s.

HD button

Press to switch to source connected to
YUV (component) inputs and HDMI 1 /
HDMI 2 inputs.

DISPLAY button

Press to change disc status information
displayed on the screen.

3. Number (0 - 9) buttons

4. • [dot] button

Use to enter digital sub-channels. (i.e.

11.3 or 12.7)

5. MENU button

Press to display the on-screen TV menu.

6. VOLUME (- / +) buttons

Press to adjust the volume level.

7. CURSOR (

Press to highlight selections on a menu
screen and adjust certain settings.

ENTER button

Press to confirm selections on a menu
screen.

8. CC button

Press to activate the Closed Captioning
feature. This function only works on
programs broadcasted with captions.

9. EXIT button

Press to exit the TV SET UP menu and
return directly to normal viewing.

10. SLEEP button

Press to set the SLEEP timer. The unit
will remain on for the time that is set,
and will automatically shut off
afterwards.

11. FUNCTION button

Press to switch between TV / A V 1 / A V 2 /
YUV in / HDMI 1 / HDMI 2 / PC in.

12. LAST CH button

Press to switch repeatedly between the
last two channels displayed.

13.MUTE

Press to turn off the sound.

14.CH

Press / to change the channels.

15.MTS buttom

Press to switch between MONO sound,
STEREO sound and Secondary Audio
Program (SAP).

16. PICTURE button

Select from preset screen display
settings to match the type of show you
are watching. (Personal / Soft / Movie /
Standard / Dynamic)

17. SOUND button

Press to select from preset sound
settings to match the type of show you
are watching. (Standard / Personal /
Theater / Voice / Music)

18. FORMA T Button

Press to select the picture format.

, , , ) buttons

button

/ CH buttons

FPE2608_ib_eng_1-13.pmd 1/15/2008, 12:54 PM5

E - 5

CONTROL REFERENCE GUIDE

FRONT & SIDE VIEWS

1. STD.BY / ON button

Turns the unit on and off.

2. MENU button

Enters the on-screen TV menu.

3. FUNCTION button

Selects TV / A V 1 / A V 2 / YUV in / HDMI 1 /
HDMI 2 / PC in.

4.

CH buttons
Confirms selections on the TV menu
screen and changes the TV channels.

5. - VOL + controls

Adjusts the volume level.

6. Removable stand

7. Color LCD screen

8. Remote sensor

Receives the remote control signal.

Standby indicator

9. Speaker

E - 6

FPE2608_ib_eng_1-13.pmd 1/15/2008, 12:54 PM6