Audiovox FPE1909DVDC User Manual

FPE1909DVDC

Dear Customers

May we take this opportunity to thank you for purchasing this LCD TV .We strongly recommend that you carefully read the safety and operation instructions before operating your TV. FOLLOW INSTRUCTIONS AND HEED ALL WARNINGS on your LCD TV found in this manual.

Safety Information

 Note:

Before connecting the AC power cord to the DC adapter outlet, make sure the voltage designation of the DC adapter corresponds to the local electrical supply. If you are unsure of your power supply, ask your local power company.

 CAUTION:

 To avoid electric shock, never touch the inside of the LCD TV. Only qualified technicians should open the case of the LCD TV

 WARNING:

 Do not defeat the safety purpose of grounding-type. A grounding type plug has two blades and a third grounding pin. The third pin is

provided for your safety. If the plug does not fit, ask your electrician to replace your obsolete outlet. Do not modify the plug. To do so will void the safety feature.

 To reduce the risk of fire or electric shock, and annoying interference, use the recommended accessories only.

Precautions

Please read these precautions before operating this unit.

Power cord protection:

 Never use your LCD TV if the power cord has been damaged. Do not allow anything to rest on the power cord, and keep the cord away

from where people can trip over it.

 Be sure to hold the plug, not the cord, when disconnecting the LCD TV from an electric socket.  Locate your LCD TV near an easily accessible AC outlet.

Placement

 Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer; or sold with the apparatus. When a cart is used, use

with caution when moving the cart to avoid injury from tip-over. Follow all instructions regarding their use exactly.

 An appliance and a cart combination should be moved with care. quick stops, excessive force, and uneven surfaces may cause the

appliance and cart to overturn.

 Avoid placing the LCD TV in areas of direct sunlight, high temperature or high humidity or high levels of dust. The internal parts may be

damaged as a result.

 High temperature can cause problems. Don’t use your LCD TV in direct sunlight, and keep it away from it – unplug it immediately and

contact an authorized dealer or service center.

 Please put the LCD TV in a location with low humidity and a minimum of dust.  Place the LCD TV on a solid surface and treat it carefully. The screen is made of thin glass with a plastic front surface and can be

damaged if dropped, hit or scratched.

Non-use Periods

 Unplug the LCD TV when it is going to be left unused for and extended period of time.

Foreign Object

 Never insert anything metallic into the cabinet openings of the liquid crystal display (LCD) TV; doing so may create the danger of electric

shock.

Keep away from water / magnetic fields

 Do not expose the LCD to rain or use it near water (in kitchens, near swimming pools, etc.). If the LCD accidentally got wet, unplug it

and contact an authorized dealer immediately.

 Do not clean the front with ketone-type materials (e.g., Acetone), ethyl alcohol, toluene, ethyl acid, methyl, or chloride-as these may

damage the panel.

 Keep the unit away from flower vases, tubs, sinks, etc. If liquids are spilled into the unit, serious damage will occur.

Stacking

Openings in the LCD TV cabinet are provided for ventilation. To prevent overheating, these openings should not be blocked or covered. Also, avoid using the LCD TV on a bed, soft, rug, or other soft surface. Doing so may block the ventilation openings in the bottom of the cabinet. If you put the LCD TV in a bookcase or some other enclosed space, be sure to provide adequate ventilation.

Servicing

 If the LCD TV does not operate normally – in particular, if there are any unusual sounds or smells coming from it – unplug it immediately

and contact an authorized dealer or service center.

 Unplug your LCD TV from the AC outlet before any service.  Be sure the service technician uses authorized replacement parts or their equivalents. Unauthorized parts may cause fire, electrical

shock, or other hazards.

 Following any service or repair, be sure the service technician performs safety checks to certify that the LCD TV

is in safe operating order.

Table of contents

Safety Information……………………………………………………………….……………………..………..2 Precaution………….…………………………………………………………….……………………..………..3 Table of contents……………………………………………………………….……………………..………..4 View of the Unit……………………………………………………………….……………………...……..5-6 Remote Control……...…………………………………………………………….……………………...…..7-8

For TV operation

Basic opeartion……...……………………………………………………………….………………….…..9-10 Menu.opeartion..……………………………………………………………….…………………………..11 PI CT UR E S ettings ……. ..……… …………… …………… ……… .… ……… …… ……… .. 12 SOUND S etti ng s…… ...…………… ………………..…… ………..……… ………….….… ..13 CHAN NEL Set tings……...…………………… ……..……… …….… …… …… …………...1 4 S E T U P … … . . . … … … … … … … … … … . . … … … … … . … … … … … … … . … … . 1 5 T I M E S e t t in g s…… . . .… … … … … … ……… . .… … … … . .… … …… … . … … … … .… . 1 6 L O C K Sett i ng s … …. . . … … … … … … … … … . . … … … … . . … …… … … . ……… … . …. 17

For DVD operation

Basic operation……...…………………………………………………………….………………….…..18-20 GEN E RA L Settings… … … .… ………… ………… ……… ……. ……… … ……… ………. .2 1 AN AL OG AUDIO Settin gs ………. …… ……… ……… …… ….… ………… …… …… … .. 22 PREFERENCE Sett ings………… …… …… …… …… ………….… …… ………… ………..23

Specifications……...…………………………………………………………….…………………………....24

The View of the Unit

STATUS LED The LED will turn red in standby mode, and turn green in the on mode IR Infrared Receiver VOL+/VOL- button Decrease and increase volume. MENU button Press once to display the OSD (on screen display), press again to turn the OSD off. CH+/CH- button Decrease and increase channels. SOURCE button Press this button to select TV, AV, S-Video, DVD, PC or SCART mode. STANDBY button Press this button to turn the LCD on or off.

NOTE: Ensure Main Power Swith on back of LCD TV Is set to ON. Press this button to open the disc tray Press this button to PLAY OR PAUSE the disc

The View of the Unit

Remote Control

1 POWER button 2 NUMERIC buttons (0-9 and -/--) 3 MENU button 4 DIRECTION and ENTER/PLAY button 5 INFO button 6 SLEEP button 7 MUTE button 8 PLAY/PAUSE button (DVD only) 9 STOP button (DVD only) 10 GOTO button (DVD only) 11 A-B button (DVD only) 12 TITLE button (DVD only) 13 ANGLE button (DVD only) 14 FAST REVERSE button (DVD only) 15 FAST FORWARD button (DVD only) 16 SOURCE button 17 CH+/CH- button 18 VOL+/VOL- button 19 RETURN button 20 DVD SETUP button(DVD only) 21 EJECT button(DVD only) 22 PICTURE button 23 SOUND button 24 EXIT button 25 CCD button(DVD only)

MENU button(DVD only)

F-LIST button REP.button(DVD only)

CH-LIST button 28 AUDIO button(DVD only) 29 SUB button(DVD only) 30 Chapter Forward button(DVD only) 31 Chapter previous button(DVD only)

Remote Control

Battery installation

Insert the batteries while observing the correct (+) and (-) polarities.

Service life of batteries

 The batteries normally last for about one year although this depends on how often and for what operations the remote control is used.  If the remote control unit fails to work even when it is operated near the unit, replace the batteries.  Use 2 x “AA” type batteries

Notes:

 Do not use rechargeable (NI-Cd) batteries.  Do not attempt to recharge, short-circuit or disassemble batteries. Never place

batteries close to a heat source such as radiators or heaters.

 Dispose of batteries in a responsible manner. Never throw batteries into a fire.  Do not drop or step on the remote control unit. This may damage the parts or lead to

malfunction.

 Do not mix old and new batteries.  If the remote control unit is not going to be used for long time, always remove the

batteries to prevent leakage.

Remote control operation range

Point the remote control no more than about 6m for the remote control sensor and within 60º from the Infrared Receiver

 The operating distance may vary according to the brightness of the room.

Notes:

 Do not point bright lights at the remote control sensor.  Do not place objects between the remote control and the infrared receiver  Do not use this remote control while simultaneously operating the remote control of any other equipment.

+ 17 hidden pages