AUDIOTOX
ELECTRONICS CORP.
FP1510 USER MANUAL
Color TFT-LCD TV/MONITOR
Safety Instructions
RISK OF ELECTRIC
SHOCK DO NOT OPEN
TO REDUCE THE RISK OF ELECTRIC SHOCK,
NO USER-SERVICEABLE FARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL
The Lightning flash with the arrowhead symboi within an equiiaterai triangie is
intended to aiert the user to the presence of uninsuiated "DANGEROUS VOLTAGE"
A
A
Important Safety Instructions
• Read instructions - Aii the safety and operating instructions shouid be read before the product is
operated.
Retain instructions - The safety and operating instructions shouid be retained for future references.
Heed Warnings - Aii Warnings on the product and in the operation instructions shouid be adhered to.
Foiiow instructions - Aii Operating and user instructions shouid be foiiowed.
Cieaning - Unpiug this product from the waii outiet before cieaning. DO NOT use iiquid cieaners or
aerosoi cieaners. Use damp Cioth for cieaning.
Attachments - DO NOT use attachments not recommended by the product manufacturer they may
cause hazards.
Attaching The FP1510 TV To Wali - Use oniy the waii attachments recommended by the manufacturer.
Unapproved attachments may be hazardous to you and the unit.
Keep Away From Heated Areas - Do not piace the FP1510 TV near heat; for exampie, near a radiator,
stove, or other heating device.
DO NOT use this apparatus near water. For exampie: Avoid piacing it near bathtub, washbowi,
kitchen sink, or iaundry tub, in a wet basement, or near a swimming pooi, etc.
NEVER push objects or any kind into this unit through the cabinet siots as they may touch dangerous
voitage points or short out parts that couid resuit in a fire or eiectric shock. NEVER spiii iiquid of any
kind on the LCD TV.
DO NOT biock any ventiiation openings. Instaii in accordance with manuMcture's instructions.
Siots and openings in the cabinet and the back and bottom are provided for ventiiation, and to ensure
reiiabie operation of the LCD TV and to protect it from Overheating. These openings must NOT be
biocked or covered. There shouid be at ieast 10cm of space from these openings.
The openings shouid never be biocked by piacing the LCD TV on a bed, rug or other simiiar surface.
This product shouid NOT be piaced in a buiit-in instaiiation such as a bookcase uniess proper
ventiiation is provided.
within the product's enciosure that nnay be of sufficient magnitude to constitute a
risk or eiectric shock to persons.
The Exciamation point within an equiiaterai triangie is intended to aiert the user
to the presence of important operating and maintenance (servicing instructions in
the iiterature accompanying the product).
CAUTION :
DO NOT REMOVE COVER (OR BACK).
A
1
• Grounding or Polarization - This product may be equipped with a polarized alternating current line
plug (a plug having one blade wider then the other). This plug will fit the power outlet only one way.
This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug.
If the plug should still fall to fit, contact your electrician to replace your obsolete outlet.
DO NOT defeat the safety purpose of the polarized plug.
• Power - Cord Protection - Power supply cords should be routed so that they are not likely to be
walked on or pinched by Items placed upon or against them. Pay particular attention to cords at
plugs, convenience receptacles, and the point where they exit from the product.
Power Sources - This product should be operated only from the type of power source Indicated on
the rear panel. If you are not sure of the type of power supply to your home consult your product
dealer or local power company.
• UL Safety Remark (AC Adaptor) - This product Is Intended to be supplied by a Listed power unit
marked "class 2", "Limited Power Source" or "LPS" and output rated +12 Vdc, 3.0 A or equivalent
statement provided In operating manual. If power unit Is not provided with product.
• Power Sources - This product should be operated only from the type of power surce Indicated on the
rear panel. If you are not sure of the type of power supply to your home consult your product dealer
or local power company.
• Lightning - For added protection for this product during a lightning storm, or when it Is left
unattended and unused for this product during a lightning storm, or when it is left unattended and
unused tor long periods of time, unplug It from the wall outlet and disconnect the antenna or cable
system. This will prevent damage to the product bue to llghening and power - line surges.
• Power Lines - An outside antenna system should not be located in the vicinity of overhead power
lines or other electric light or power circuits, or where It can fall Into such power lines or circuits.
When Installing an outside antenna system, extreme care should be taken to keep from touching
such power lines or circuits as contact with them might be fatal.
• Overloading - DO NOT overload wall outlets, extension cords or Integral convenience receptacles as
this can result In a risk of fire or electric shock.
• Damages Requiring Service - Unplug this product from the wall outlet and refer servicing to qualified
service personnel under the following conditions.
(a) When the power-supply cord or plug Is damaged.
(b) If liquid has been spilled, or objects have fallen into the product.
(c) If the product has been exposed to rain or water.
(d) If the product does not operate normally after following the operating Instructions.
Adjust only those controls that are covered by the operating instructions as an improper adjustment
of other controls may result In damage and will often require extensive work by a qualified technician
to restore the product to Its normal operation.
(e) If the product has been dropped or damaged in any way.
(f) When the product exhibits a distinct change In performance - this Indicates a need for service.
Replacement parts - When replacement parts are required, be sure the service technician has used
replacement parts specified by the manufacturer or have the same characteristics as the original part.
UNAUTHORIZED substitution may result in fire, electric shock or other hazards.
Safety Check - Upon completion of any service or repair to this product, ask the service technician to
perform safety checks to determine that the product is in proper operating condition.
Heat - The Product should be situated away from heat source such as radiators, heat registers,
stoves or other products (including amplifiers) that produce heat.
DO NOT place this product on an unstable cart, stand, tripod, bracket, or table.
The product may fall, causing serious injury to a child or adult, and serious damage to the product.
Use only with a cart, stand, tripod, bracket, or table recommended by the manufacturer or sold with
the product. Any mounting of this product should follow the manufacture's instructions, and should
use a mounting accessory recommended by the manufacturer.
Do not apply excessive force to operate the switch, control key and connector. Disconnect the
power plug from the AC outlet before you move the unit.
Do not touch the screen directly with your fingers. You may damage the screen, oil from your
skin is difficult to remove.
Do not apply pressure to screen. The LCD is very delicate.
Please install the FP1510 in a cool, dry and clean area, avoid heat, or excessive vibration, dust,
humidity, extreme cold and magnetic devices.
Important Information Regarding Use of Video Games, Computer, Captions or other Fixed Image
Displays.
The extended use of a fixed image program material can cause permanent "Shadow Image"
on the LCD Panel.
The background image is viewable on normal programs in the form of stationary fixed image.
This type of irreversible LCD panel deterioration can be limited by observing.
A. Reduce the brightness/contrast setting to a minimum viewing level.
B. DO NOT display the fixed image for extended periods of time.
C. Turn the power off when not in actual use.
This product utilizes tin-lead solder, and has a fluorescent lamp containing a small amount of mercury.
Disposal of these materials may be regulated in your community due to environmental considerations.
For disposal or recycling information please contact you local authorities, or the Electronics Industries
Alliance:
http://www.eiae.org
CONTENTS
1. INTRODUCTION
Product Description —
Product Features------------
Package Contents
--------------------------------------
2. SYSTEM SETUP
Top Panel & Remote Controller Function ■
Assembly and Connections
Input/Output Signal Connections
-------------------------
-----------------------------
3. FP1510 OPERATING INSTRUCTIONS
TV and AV Manual Operating Instructions
Using the FP1510 as a Computer Monitor
-----------------
------------------
4. REFERENCE
Display Modes
LCD Monitor Display Angle---------------------
-------------------------------------------------------
-07
-08-11
------
-13-16
-17-30
-31-36
-05
-06
12
-37
-37
Wall-mounting Operating Instructions ■
Cleaning-----------------------------------------------
-38
-38
5. APPENDIX
Troubleshooting -
Specification —
Duplicate page by Design ■ ■41
-39
-40
1. INTRODUCTION
Product Description
Thank you for choosing the AUDIOVOX FP1510 TFT-LCD Color TV/Monitor and for your continued
support and use of our products.
The FP1510 combines the features of a TV/MONITOR with a THIN FILM TRANSISTOR liquid crystal
display (TFT-LCD).
This new generation of TFT-LCD incorporates a high quality display in a light weight module.
As such the unit has power-saving capabilities and emits no X-ray radiation. There are many benefits
from this TFT-LCD namely comfort, safety, and environmental protection.
The FP1510 features a 15" color-active matrix, Thin-Film-Transistor (TFT) Liquid Crystal Display (LCD)
to provide superior display performance. A maximum resolution of 1024x768 is ideal for displaying
complex graphics and high definition images from your computer. Other outstanding features include
freedom from video oscillations and selection of various choices of digital video and audio signal inputs.
You will get the feeling that the large-sized surface of operation with the Video - On - Video (VOV)
feature, together with the high-quality 3D stereo speakers and remote high-level amplifiers
connections,provides a coherent, top-of-the-line Audio and Video systems for viewing pleasure.
In addition the TFT-LCD display allows "Plug & Play" connection to your PC and has a built-in On
Screen Display (OSD) functions that can operate from the convenience of a remote control.
Product Features
TFT-LCD screen connected with Computer support DDC1/2B 1br"Plug & Play"compatibility.
15-Inch high-resolution LCD Monitor which supports XGA 1024x768 resolution.
Super 2,359,296 high-resolution pixels to enhance TFT-LCD definition.
Super 350cd/m^ high-brightness for picture enjoyment.
Super wide viewing angle : Horizontal: 150°, Vertical: 130°.
Super-low power consumption ; 50% more power saving than conventional TV.
Super 9300° color temperature for LCD monitor choice of color.
Internal subtitle decode function to precisely display multi-language capability
CATV full-frequency channel receive capability
AV-terminal input and S-Video inputs for high-quality pictures.
3D Stereo for realistic acoustics.
Slim space-saving feature of up to 70% compared with a normal CRT monitor.
Light design reduces weight by 15% compared with traditional TV monitor.
High contrast ratio of 500 :1 provides optimum clear image.
Multi-digital input terminal provides a host of video and audio choices.
Supports Video-On-Video ; VOV can display multiple video sources at one time.
Intelligent screen image setting
Intelligent Window Control Surface to simplify function settings.
Power saving device ; monitor VESA DPMS automatically enters into power save mode to reduce
power consumption to less than 8W in stand by (no-signal) mode.
Built-in wall mounting ; Detachable stand enhances wall-mounting application.
Package Contents
Please check the FP1510 Package to make sure it contains the following items
©®{D
® ®® •
® ®® •
e®9
®©e®
□ S' 4
Siim-type
Remote Control
SPEAKERS
15"TFT-LCD
BASE TRANS
Power Transformer Cord Power Cord
VGA Cable User Manual Hardware Kit
2. SYSTEM SETUP
Top Panel & Remote Control Function
TOP PANEL :
VOL - : Volume down Button : decreases volume
MENU : Menu Button : Selects command function
VOL + : Volume up Button : Increases volume
POWER : Power Button : Power on/off control
CH - : Channel down Button : Decreases setting channel
CH + : Channel up Button : Increases setting channel
IR : Remote IR detect window: Receives IR signal from
remote control
Remote Control Unit:
IR
-7,8
-10
-11
-12
-13
-14
4
5
9
Remote Control Buttons :
^ (C D)
POWER
Power On/Off
© @ ®
2 ® ® ®
® ® ®
3 I \^]
4 [Ch+
5 ich-
6 (Enlei] ^NTER
7 (Vol-
KEYPAD
Press number key to select channel of TV
®
Turns volume off
CH+
Increase TVchannel setting
CH-
Decrease TV channel setting
Enters command keypad functions
VOL-
Decreases volume setting
11 (Auto) AUTO
,, ,, OSD Display
■10 M '/H \ r f
■ ^ \ \'W\ I Chooses on-screen subtitle color, Including yellow,
13 (□r^) Main Disp Switch
14 Sub Disp Switch
Scons signal channels TV and CATV
blue, white and black
Chooses Main Display for AV, $V,CATV, TV, PC
Chooses Sub Display tor AV, SV.CAW, TV
Sub Disp Move
15 Ml M ] Press to show VOV,sub picture shifts Its position to
1« 1^1
10 ) Switches VIdeo-On-VIdeo In the TV window
17
18 (<r\
one of four viewing angles In TV
BACKWARD
Selects previous menu Item
©
CANCEL
Back to last title
8 ^0/+
VOL+
Increases volume setting
ADJ
9 (ADJ 1 saturation,hue,brlghtness
and contrast functions 20 i^onuj [jjjpiQy, nienu on screen
INFO per All
Displays the Signal source Of the current Channel 21 (iteco//) “CAtt
©
©
FORWARD
Selects next menu Item
»last channel viewed
Recalls the
19
Remote Control Battery Installation/Removal :
Change the Battery if the Remote Control no longer operates the FP1510.
Caution :
Only use CR2025 type Battery.
Confirm the polarity(+/-) of battery before installing
Removal the battery if the Remote Control Is not to be
used for a long time.
10
Remote Control Operating Instruction:
The Remote Control Transmission consists of an Infrared (IR) Signal.
Make sure the line-of-sight between Remote Control and FP1510 Is clear of
objects that could Interfere with the remote IR signal. Always point the Remote
Control directly at the FP1510 sensor.
CAUTION !!
Avoid damaging the Remote Control by :
# Applying excessive pressure when pressing buttons
O Exposing to extreme Low or High temperatures
# Exposing to excessive Moisture
# Mishandling to Dropping
11
Assembly and Connection
Assembly of the TFT-LCD
1 .S.Speaker 2.Monitor and 4.Stand
DISPLAY BRACKET MOUNTING
How to unfold the stand on the bottom
when you mounting to wall.
WALL MOUNTING
NOTE :
When mounting to wall please
secure to wall stud.
Caution :
You must complete assembly
prior to power appiication
Power Cable
Power Cable
12
Input/Output Signal Connections
1. ANT CABLE INPUT
2. POWER ADAPTER INPUT
3. HEADPHONE OUTPUT
4. RIGHT SPEAKER OUTPUT
5. LEFT SPEAKER OUTPUT
6. VGA INPUT
7. A-VIDEO INPUT
8. RIGHT AUDIO INPUT
9. LEFT AUDIO INPUT
10. S-VIDEO INPUT
Connecting TV Cable
TV ANT
O <8> (®) (M
((•;)) (W
13
DC Power Socket
(•) o
DC-IN
Connecting Left and Right Speakers
{(•)) ((•))
») o
w m •worn» m
SPEAKER
14
Connecting to S-video terminal equipment such as
DVD. VCR or Gaming Consoie.
o m
S-VIDEO IN
15
Connecting to AV-terminal equipment such as
DVD, VCR, and Gaming Consoie.
o m
S-VIDEO
0
• (Wl
yyy
OUT
VIDEO
L R
m m ®
AAA
\bllow Red White
IN FROM ANT ^ ^
L
OUT TO TV
16
3.FP1510 OPERATING INSTRUCTIONS
TV and AV Operating Instructions
MAIN DISP
Press and release the Menu button
to display the following Main Menu
for TV and AV functions :
Press and release the Menu button again
to access the MAIN DISP menu :
3. Sound Option
4. Close Subtitle
5. Parent Control
6. On-Screen-Display(OSD) Option
7. TV Mode Option
8. Brightness
9. Contrast
10. Saturation
11. Hue
12. Sharpness
13. Recall
14. Exit
INPUT SIGNAL SELECTIONS :
1. VGA-Computer Input Signal
2. AVIDEO-AV Input Signal
3. SVIDEO-S-Video Input Signal
4. CATV-Cable TV Input Signal
5. TV-TV Input Signal
RETURN to Previous Menu
17
SUB DISP (sub display)
SUB DISP has four signal inputs - AVIDEO, SVIDEO, CATV and TV. These inputs are used to
connect to a DVD-Player, VCR etc.
1. AVIDEO (AV-Terminal)
2. SVIDEO (S-Terminal)
3. CATV
4. TV
5. Video-On-Video(VOV) OFF
6. RETURN
With the Main Menu displayed,Press and
release the Q button to highlight
SUB DISP
Press and release the MENU button to
display the SUB DISP Menu :
AUDIOVOX
MAIN DISP
SUB DISP
AUDIO
CLOSE CAPTION
PARENT CONTROL
OSD SETUP
TV SETUP
BRIGHTNESS
CONTRAST
SATURATION
HUE
SHARPNESS
RECALL
EXIT
H:31.4KHZ V:59.8HZ
640X480
AUDIOVOX
AVIDEO
SVIDEO
CATV
TV
VOV OFF
RETURN
640X480
H:31.4KHZ V:59.8HZ
Press and release the @ button to
highlight AVIDEO. Then Press and
release the Menu button to select
AVIDEO for (Video-On-Video) viewing.
AUDIOVOX
SVIDEO
CATV
TV
VOV OFF
RETURN
18
H:31.4KHZ V:59.8HZ
640X480
With the Main Menu dispiayed, use the
Q button to seiectVOV ADJUST
AUDIOVOX
AUTOTUNE
CONTRAST
BRIGHTNESS
AUDIO
COLOR
QUALITY
POSITION
CLOSE CAPTION
PARENT CONTROL
OSD SETUP
TV SETUP
RECALL
SAVE EXIT 800X600
H:53.6KHZ V:84.8HZ
Then Press and release the Menu
button to select VOV adjustments :
VOV POSITION
BRIGHTNESS
CONTRAST
SATURATION
HUE
SHARPNESS
BORDER SIZE
BORDER COLOR
RETURN
AUDIOVOX
800X600
H:53.6KHZ V:84.8HZ
With the VOV POSITION Menu displayed,
use the Q button to select the
VOV POSITION desired then Press Menu
to display
NOTE :
Position 1 - Bottom Right
Position 2 - Bottom Left
Position 3 - Upper Left
Position 4 - Upper Right
AUDIOVOX
POSITION 1
POSITION 2
POSITION 3
POSITION 4
800X600
H:53.6KHZ V:84.8HZ
Press theQQ button to select
Position. Press and release the
Menu button to go back to the
previous Menu.
19
NOTE :
The following adjustments will effect the VOV only, not the Main display.
VOV POSITION
BRIGHTNESS
CONTRAST
SATURATION
HUE
SHARPNESS
BORDER SIZE
BORDER COLOR
RETURN
H:53.6KHZ V:84.8HZ
BRIGHTNESS CONTRAST
^
________________________
120 192
Press the button to adjust
setting and then Press and release
the Menu button to confirm and
return to previous page.
SATURATION HUE
200
Press the ©© button to adjust
setting and then Press and release
the Menu button to confirm and
return to previous page.
AUDIOVOX
800X600
1
Press the ©© button to adjust
setting and then Press and release
the Menu button to confirm and
return to previous page.
Press the ©© button to adjust
setting and then Press and release
the Menu button to confirm and
return to previous page.
^
________________________
128
1
SHARPNESS
1 1
0
Press the ©© button to adjust
setting and then Press and release
the Menu button to confirm and
return to previous page.
Press the ©© button to adjust
setting and then Press and release
the Menu button to confirm and
return to previous page.
BORDER SIZE
____________________
3
Press the ©© button to adjust
setting and then Press and release
the Menu button to confirm and
return to previous page.
20
1
AUDIO
Select the desired level of GAIN, BASS, TREBLE and LOUDNESS.
1. AUDIO CHANNEL - Choose Audio Input Source (A-Video, TV).
2. SPEAKER ON/OFF - Mute Speaker
3. GAIN - Adjusts Audio Gain
4. BASS - Adjusts Bass
5. TREBLE - Adjusts Treble
6. LOUDNESS - On or Off
7. RETURN - Back to Main Menu Display
NOTE :
Use the A and ▼to move between the
options, also use theA and Tto adjust
progress bar.
Access the Main Menu and
highlight AUDIO then press and
release the Menu button to
select.
MAIN DISP
CLOSE CAPTION
R^RENT CONTROL
OSD SETUP
TV SETUP
BRIGHTNESS
CONTRAST
SATURATION
HUE
SHARPNESS
H:31.4KHZ V:59.8HZ
AUDIOVOX
640X480
AUDIOVOX
AUDIO CHANNEL
SPEAKER ON/OFF
GAIN
BASS
TREBLE
LOUDNESS
RETURN
640X480
H:31.4KHZ V:59.8HZ
AUDIO CHANNEL
SPEAKER ON/OFF
GTflN
BASS
TREBLE
LOUDNESS
RETURN
AUDIOVOX
I
640X480
H:31.4KHZ V:59.8HZ
GAIN BASS
TREBLE
AV
TV
RETURN
AUDIOVOX
640X480
H:31.4KHZ V:59.8HZ
AUDIOVOX
SPEAKER ON/OFF
fONi
LOUDNESS
I
8
lYlSl NO
OFF
21
CLOSE CAPTION
The caption can display the spoken audio content of picture.
1. CAPTION - You can choose to show the caption or not.
2. DISPLAY:
a. BOX - You can choose to box the caption.
b. SHADOW - You can choose to show the caption in shadow (not boxed) format.
3. RETURN - Back to main menu display
NOTE :
Not all channels display CLOSE CAPTION.
With the Main Menu displayed, Press and
release the @ button to highlight
CLOSE CAPTION
AUDIOVOX
MAIN DISP
SUB DISP
AUDIO
CLOSE CAPTION
PARENT CONTROL
OSD SETUP
TV SETUP
BRIGHTNESS
CONTRAST
SATURATION
HUE
SHARPNESS
RECALL
EXIT 640X480
H:31.4KHZ V:59.8HZ
Press and release the Menu button to select
CAPTION(1-4)and text (1-4) options.
AUDIOVOX
DISPLAY CAP 1
RETURN CAP 2
NO
CAP3
CAP 4
TXT1
TXT 2
TXT3
TXT 4
Press and release the Menu button to
display the CAPTION Menu.
AUDIOVOX
CAPTION
DISPLAY
RETURN
NO
BOX
640X480
H:31.4KHZ V:59.8HZ
Press and release the Menu button to select
DISPLAY.
AUDIOVOX
CAPTION
RETURN
BOX
SHADOW
I H:31.4KHZ V:59.8HZ |
640X480
H:31.4KHZ V:59.8HZ
640X480
22
PARENT CONTROL
With the Main Menu displayed,
Press and release theQ button
to highlight PARENT CONTROL :
MAIN DISP
SUB DISP
AUDIO
CLOSE CAPTION
PARENT CONTROL
OSD SETUP
TV SETUP
BRIGHTNESS
CONTRAST
SATURATION
HUE
SHARPNESS
RECALL
AUDIOVOX
640X480
H:31.4KHZ V:59.8HZ
Input the four-digit Parent Control Password
and confirm using the Menu button
(Default Code is 3308)
After entering the Password, the following
menu will appear:
AUDIOVOX
SET PASSWORD
V-CHIP LOCK
CLASS OPTION
MPAA OPTION
RETURN
640X480
H:31.4KHZ V:59.8HZ
After accessing the Parent Control Menu,
highlight SET PASSWORD and Press and
release the Menu button.
Then enter a 4-digit Password to change
the Parental Control Menu Password.
23
PARENT CONTROL (continued)
From the PARENT CONTROL Main Menu.
Press and release the@ button to
highlight V-CHIP lock then Press and
release the Menu button :
Enable the V-CHIP lock function by Selecting
YES and disable by selecting NO.
From the PANRENT CONTROL Main Menu.
Press and release theQ button to
highlight CLASS OPTION on Main Parental
Control Menu :
TV-Y
TV-Y7 YES/NO
TV-G YES/NO
TV-PG YES/NO
TV-14 YES/NO
TV-MA YES/NO
RETURN
AUDIOVOX
YES/NO
640X480
H:31.4KHZ V:59.8HZ
Select the desired age class and Press and
release the Menu button.
Select RETURN to go back to the Parental
Control Main Menu.
24
PARENT CONTROL (continued)
PARENTAL CONTROL RATINGS
From the PARENT CONTROL Main Menu.
Press and release the @ button to
highlight MPAA OPTION and
press menu :
AUDIOVOX
a
PG
PG-13
R
NC-17
X
RETURN
640X480
H:31.4KHZ V:59.8HZ
Select the desired rating level and press Menu.
Select RETURN to return to the main parental
control menu.
YES/NO
YES/NO
YES/NO
YES/NO
YES/NO
YES/NO
CLASS OPTION MPAA OPTION
a.TV-Y e. TV-14
a.G
e. NC-17
b.TV-Y7 f.TV-MA b. PG f.X
c.TV-G g. Return c. PG-13 g. RETURN
d.TV-PG d. R
25
ON SCREEN DISPLAY(OSD) SETUP l
With the Main Menu dispiayed,
Press and reiease the Q button to
highiight OSD SETUP
MAIN DISP
SUB DISP
AUDIO
CLOSE CAPTION
PARENT CONTROL
TV SETUP
BRIGHTNESS
CONTRAST
SATURATION
HUE
SHARPNESS
RECALL
AUDIOVOX
640X480 640X480
H:31.4KHZ V:59.8HZ
OSD LANGUAGE :
Using the @ button, seiect the desired
LANGUAGE
AUDIOVOX AUDIOVOX 1
ENGLISH
Press and reiease the Menu button to
seiect LANGUAGE, OSD COLOR or OSD
TiMER
AUDIOVOX 1
OSD COLOR
OSD TIMER
RETURN
-►
H:31.4KHZ V:59.8HZ
OSD COLOR :
Using the Q button, seiect the desired
OSD Message Coior then Press and
reiease the Menu button to confirm
BLUE
WHITE
BLACK
RETURN
640X480
H:06.9KHZ V:13.2HZ
OSD TIMER :
Using the @ button, seiect the amount of
time you wouid iike the OSD Massage to
be viewed (5,10,15 seconds) then Press
and reiease the Menu button to confirm
26
640X480
H:06.9KHZ V:13.2HZ
With the MAIN MENU displayed,
Select TV SETUP using the Menu
button :
MAIN DISP
SUB DISP
AUDIO
CLOSE CAPTION
PARENT CONTROL
^nr
BRIGHTNESS
CONTRAST
SATURATION
HUE
SHARPNESS
RECALL
EXIT
H:31.4KHZ V:59.8HZ
Select TV SETUP and highlight ERASE/
ADD then Press and release the Menu
button.
AUDIOVOX
ERASE/ADD
AUTO PROGRAM
STD
IRC
HRC
RETURN
640X480
H:31.4KHZ V:59.8HZ
Select TV SETUP and highlight AUTO
PROGRAM then Press and release the
Menu button.
AUDIOVOX
ERASE/ADD
AUTO PROGRAM
STD
IRC
HRC
RETURN
AUDIOVOX
640X480
Using the @ button, select ERASE or
ADD then Press and release the Menu
button to confirm.
NOTE : this function can ERASE or ADD
the present display's channel.
Using the @ button, select YES or NO.
(No need to press Menu button. The
Autoprogram will Autostart).
640X480
H:31.4KHZ V:59.8HZ
NOTE :
STD, IRC,HRC are Cable system standards.
These options are used to comply with Cable TV formats.
27
With the MAIN MENU displayed, select
BRIGHTNESS, CONTRAST, SATURATION,
HUE OR SHARPNESS then Press and
release the Menu button to confirm. The
following screen(s) sill be displayed (see
screens below)
MAIN DISP
SUB DISP
AUDIO
CLOSE CAPTION
PARENT CONTROL
OSD SETUP
TV SETUP
BRIGHTNESS
CONTRAST
SATURATION
HUE
SHARPNESS
RECALL
EXIT
AUDIOVOX
H:31.4KHZ V:59.8HZ
640X480
BRIGHTNESS
Adjusts the overall Image and background
screen brightness.
BRIGHTNESS CONTRAST
173 133
Press the button to adjust setting
then press Menu to return to the previous
menu.
SATURATION
Adjusts the color gradations In relation to the
Images and background.
SATURATION HUE
120 31
Press the (T)© *^^**°'^ adjust setting
then press Menu to return to the previous
menu.
SHARPNESS
Adjusts the overall Image and background
screen sharpness.
CONTRAST
Adjusts the Image brightness In relation to the
background.
Press the {J)Q button to adjust setting
then press Menu to return to the
previous menu.
HUE
Adjusts the color definition in relation to image
and background.
Press the©© button to adjust setting
then press Menu to return to the
previous menu.
Press the ©©button to adjust setting
then press Menu to return to the previous
menu.
28
With the MAIN MENU displayed,
Select RECALL using the Menu button
AUDIOVOX
MAIN DISP
SUB DISP
AUDIO
CLOSE CAPTION
PARENT CONTROL
OSD SETUP
TV SETUP
BRIGHTNESS
CONTRAST
SATURATION
HUE
SHARPNESS
EXIT
640X480
H:31.4KHZ V:59.8HZ
RECALL
Automatically reset setting to factory defaults.
Press the ©© buttons to select YES or NO option,
(No need to select Menu the RECALL will happen Automatically).
29
EXIT
Exits the on-screen-menu controls
With the MAIN MENU displayed,
EXIT using the MENU button to
exit the MAIN MENU
AUDIOVOX
MAIN DISP
SUB DISP
AUDIO
CLOSE CAPTION
PARENT CONTROL
OSD SETUP
TV SETUP
BRIGHTNESS
CONTRAST
SATURATION
HUE
SHARPNESS
L
»
640X480
H:31.4KHZ V:59.8HZ
30
Using the FP1510 as a Computer Monitor
Press the @ button to highlight
MAIN DISP and Press and release the
Menu button.
Select VGA and Press and release
the Menu button.
SUB DISP
AUTOTUNE
CONTRAST
BRIGHTNESS
AUDIO
COLOR
QUALITY
POSITION
OSD SETUP
RECALL
SAVE EXIT
EXIT
H:53.6KHZ V:84.8HZ
AUDIOVOX
800X600
AVI DEO
SVIDEO
CATV
TV
RETURN
AUDIOVOX
800X600
H:53.6KHZ V:84.8HZ
NOTE :
The CLOSE CAPTION and PARENT CONTROL options will not appear in the Main
Menu until a TV program has been accessed using the SUB DISP menu.
31
AUTO TUNE
Automatically optimizes the VGA signal for viewing.
With the Main Menu displayed,use
the @ button to select AUTOTUNE
MAIN DISP
SUB DISP
AUTOTUNE
CONTRAST
BRIGHTNESS I-
AUDIO
COLOR
QUALITY
POSITION
OSD SETUP
RECALL
SAVE EXIT
EXIT 800X600
AUDIOVOX
H:53.6KHZ V:84.8HZ
Then Press and release the Menu button
to display the following screen :
AUTOTUNE:
Only worked when unit is connected to computer
and the screen will appear "DOING"
CONTRAST
Adjusts the image brightness in relation to the
background.
CONTRAST
BRIGHTNESS
Adjusts the overall image and background
screen brightness.
BRIGHTNESS
^ 1 ^
16
Press the QQ button to adjust setting
then press Menu to return to the
previous menu.
32
___________________________
32
Press the@©^^'*°'^ adjust setting
then press Menu to return to the previous
menu.
I
With the Main Menu dispiayed, use the
Q button to seicet COLOR.
AUDIOVOX
QUALITY
POSITION
OSD SETUP
RECALL
SAVE EXIT
EXIT
H:53.6KHZ V:84.8HZ
800X600
Press and release the Menu button to
display the COLOR Menu :
Then use theQ button to select USER.
When USER Is selected, Color can be manually
adjusted by selecting the following displayed
colors:
AUDIOVOX AUDIOVOX
-►
irWil
GREEN
BLUE
RETURN
9300
7500
6550
Dliigil
RETURN
800X600 800X600
H:53.6KHZ V:84.8HZ H:53.6KHZ V:84.8HZ
When RED Is highlighted, pressing the Menu button will display the following screen :
Use theQ and Q buttons to adjust setting. Do this for each of the COLORS.
RED GREEN BLUE
39 39 39
COLOR - Color temperature
1. 9300 - If you are partial to choose the 9300 setting.
2. 7500 - The 7500 setting Is less blue than 9300.
3. 6550 - The color temperature setting Is standard.
4. USER - Increases or decreases Red, Green or Blue colors. Change In color will be reflected on
the screen Image.
NOTE :
9300, 7500 and 6550 are Preset at the factory.
33
ADV.TUNE
With the Main Menu dispiayed,use
the Q button to seiect QUALiTY.
AUDIOVOX
MAIN DISP
SUB DISP
AUTOTUNE
CONTRAST
BRIGHTNESS
AUDIO
COLOR
QUALITY
POSITION
OSD SETUP
RECALL
SAVE EXIT
EXIT
800X600
H:53.6KHZ V:84.8HZ
Adjust the picture FOCUS, SIZE and SHARPNESS.
FOCUS
Then Press and release the Menu button to
access the following screen ;
AUDIOVOX
ADV. TUNE
SIZE
FOCUS
TEXT/GFX
SHARPNESS
RETURN
H:53.6KHZ V:84.8HZ
800X600
QUALITY
1. ADV. TUNE - Automatically adjusts Image clarity and stability.
2. SIZE - Adjusts Image size relative to the screen.
3. FOCUS - Controls image clarity.
4. TEXT/GFX - Adjusts text sharpness when PC is in DOS mode.
5. SHARPNESS - Adjusts Image sharpness relative to the background.
34
IMAGE POSITION
With the Main Menu dispiayed, use
the 0 button to select POSITION.
MAIN DISP
SUB DISP
AUTOTUNE
CONTRAST
BRIGHTNESS
AUDIO
COLOR
QUALITY
OSD SETUP
RECALL
SAVE EXIT
EXIT
l!l.l;lhl.i;yrL^I
VERTICAL
CENTER
RETURN
HORIZONTAL VERTICAL
^ 1 ^ 1
51 26
AUDIOVOX
800X600
H:53.6KHZ V:84.8HZ
AUDIOVOX
800X600
H:53.6KHZ V:84.8HZ
Then Press and release the Menu
button to access the following
screen :
AUDIOVOX
OSD POS.
SPEED EN.
SPEED ADJ.
RETURN.
-►
800X600
H:S3.6KHZ V:84.8HZ
With SPEED EN highlighted,
use the Menu button to access
following screen :
With SPEED ADJ highlighted,
use the Menu button to access
following screen :
SPEED ADJ
3
35
POSITION
1. IMAGE POS.
a. HORIZONTAL - Adjusts the horizontal size by Increasing or decreasing this setting.
b. VERTICAL - Adjusts the vertical size by Increasing or decreasing this setting.
c. CENTER - Automatic adjusting Image to center.
2. OSD POS you can choose where you would like the OSD control window to appear on your screen.
Selecting OSD location allows you to manually adjust the position of the OSD control menu left, right,
up or down.
You can choose where you would like the OSD control window to appear In the center area on your
screen.
3. SPEED EN.
a. YES
b. NO
4. SPEED ADJ.
SAVE EXIT
Saves your settings then exits main menu
With Main Menu displayed,use
the0 button to select SAVE EXIT
AUDIOVOX AUDIOVOX
MAIN DISP
SUB DISP
AUTOTUNE
CONTRAST
BRIGHTNESS
AUDIO
COLOR
QUALITY
POSITION
OSD SETUP
RECALL
800X600
H:53.6KHZ V:84.8HZ
Then press and release the Menu
button to save all settings and exit
the Main Menu.
EXIT :
Changes will not be saved.
Use the@ button to select EXIT
MAIN DISP
SUB DISP
AUTOTUNE
CONTRAST
BRIGHTNESS
AUDIO
COLOR
QUALITY
POSITION
OSD SETUP
RECALL
SAVE EXIT
800X600
H:53.6KHZ V:84.8HZ
Then Press and release the Menu
button to exit the Main Menu.
36
Reference
Display Modes
Mode
1
2 720 X400 31.47 70
3 640 X480
4
5 640 X480 37.5 75
6 800 X600 35.16 56.3
7 800 X600 37.88 60.3
8 800 X600 48.08
9
10 1024 X768 48.36 60
11 1024 X768 56.47 70
12 1024 X768
13 640 X480 35
14 832 X624 49.7
15 1024 X768 48.78 60
L 16
Resolution Horizontal frequency(KHZ) Vertical frequency(HZ)
640 X350
640 X480 37.86
800 X600
1024 X768 60.241 74.927
31.47
31.47
46.87
60 75
LCD Monitor Display Angle
70
60
72
72.2
75
66.7
74.55
/
Vertical: Left 30 /Right 30
Horizontal: Up 30°/Down 5
37
Wall-Mounting Operating Instructions
Use provded guide to place hole in wall for mounting.
When mounting to wall, please secure mounting screws Into a secure wall stud.
Please NOTE when cleaning the LCD Monitor :
1. Gently wipe screen with a clean, soft,lint-free cloth to remove dust and other
particles that can scratch the screen.
2. To clean the tough areas,use a soft, lint-free cloth with a few drops of water to
remove the stubborn dirt.
3. D0 Not apply pressure to the surface of the TFT-LCD.
When you clean the housing :
1. Use a soft,dry cloth to clean housing.
2. To clean tough areas,use a soft, lint-free cloth with a few drops of water to
remove the stubborn dirt.
38
Appendix
Troubleshooting
Please use the following table to resolve the most common possible causes of the problem before
calling service personnel. A minor adjustment may eliminate the problem and restore your TV
reception.
^ Symptom
No pictureon
screen
Picture is not ciear
Image is fuzzy
Coiors are distorted
Screen bounces
or has wavy
osciilations
No sound
Only one speaker
operates
Remote Control
inoperative
Poor Picture
Reception and/or
Poor Sound Quality
When all else fails
Reset the firmware
V
Corrective Actions ^
1. Check VGA cable connection wigth computer.
2. Check that power is turned on, or that power adapter lamp is lit.
3. Adjust brightness and contrast.
4. Check input signal of TFT-LCD.
5. Check the power connection to the unit with screen.
6. Check Main Display selection.
1. Check that Video cable is pluggec in.
2. Refer to the Picture Adjustments Menu in the
OPERATING INSTRUCTIONS.
1. The power could be failing, try connecting the unit to another
power outlet.
2. Move unit a way from the magnetic equipment,
such as a Wireless Receiver, AC Transformer
3. Refer to the Picture Adjustment Procedure Menu in the
OPERATING INSTRUCTIONS.
1. Check that the Video cable is plugged in securely.
1. Check Video input range (V-sync: Max 75Hz, H-sync;
Max. 62.5KHZ).
2. Make sure Video cable connectionsare secure.
1. Check speaker connections.
2. Sound might be muted, try adjusting the volume.
1. Check speaker line connections with computer.
2. Check thet the unit's speaker wires are securely connected.
1. Check for light or obstacle interference with remote
control signal and move unit to another location.
2. Batteries are dead; replace batteries with new ones.
Contact your Cable Provider to identify the type of Cable Service
that is supplied to you (STD, IRC or HRC).
From TV SETUP mode, select the appropriate setting and Re Run
AUTO PROGRAM (Page 27).
Turn off power. Press and hold the VOL+botton on the top of the
unit and hit the power button at the same time.
Release the VOL+after you see the volume increasing. ^
.........
ETC
If the unit does not operate normally, after the operating instructions were followed. And the troubleshooting
section did not help refer to dealer or qualified service personnal.
39
SPECIFICATION
Model No. FP1510
LCD Panel 15" TFT-LCD Color Display
Pixel Number 2,359,296 pixel RGB
TV System
TV Function
Brightness
Scanning Backlighting Life 50,000hr
View Angle
Audio Amplifier 5W X 2
Input Terminal AV Input
SPECIFICATION
RF NTSC Only
TV CCIR Standard System - NTSC-M
TV Auto-install Channel
Stereo Audio
TV Remote Control
Auto-Install in advance Auto-scanning
CATV 125CH, AIR69CH
V-Chip
350cd/m^
H-Position 150°
V-Position 130°
Terminal Input A-Video,
S-Video, 15Pin D-sub
(VGA),Coax
ANT DIN
H/P (earphone) 3.5 0 Hole
Display Language
Power Adapter
Enclosure Remote Control ' Battery '
English
AC Input 100-240V
DC Output 12V/3.0A
AC Connections ' VGA Cable
AC Power Cord ' User Guide
40
Duplicate Page by Design OPTIONAL Wall-Mounting Instructions
Wall mount template :
Use provded guide to place hole in wall for mounting.
WARNING :
When mounting to wall, please secure mounting screws into a secure wall stud.
41
AUDIOVOX
CORPORATION
AUDIOVOX ELECTRONICS CORP. (the Company) warrants to the original retail purchaser of this product that should this product or any part
thereof, under normal use and conditions, be proven defective in material or workmanship within 90 days from the date of original purchase,
such defect(s) will be repaired or replaced with reconditioned product (at the Company's option) without charge for parts and repair labor.
To obtain repair or replacement within the terms of this Warranty, the product is to be delivered with proof of warranty coverage (e.g. dated
bill of sale), specification of defect(s), transportation prepaid, to the Company at the address shown beiow.
This Warranty does not extend to the elimination of externally generated static or noise, to correction of antenna problems, to costs incurred
for installation, removal or reinstallation of the product, or to damage to tapes, discs, speakers, accessories, or electrical systems.
This Warranty does not apply to any product or part thereof which. In the opinion of the Company, has suffered or been damaged through
alteration, improper installation, mishandling, misuse, negiect, accident, or by removal or defacement of the factory serial number/bar code
label(s). THE EXTENT OF THE COMPANY'S LIABILITY UNDER THIS WARRANTY IS LIMITED TO THE REPAIR OR REPLACEMENT
PROVIDED ABOVE AND, IN NO EVENT, SHALL THE COMPANY'S LIABILITY EXCEED THE PURCHASE PRICE PAID BY PURCHASER FOR
THE PRODUCT.
This Warranty Is In lieu of all other express warranties or liabilities. ANY IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY
OF MERCHANTABILITY, SHALL BE LIMITED TO THE DURATION OF THIS WRITTEN WARRANTY. ANY ACTION FOR BREACH OF ANY
WARRANTYHEREUNDERINCLUDING ANYIMPLIED WARRANTY OF MERCHANTABILITYMUST BE BROUGHT WITHIN APERIOD OF
30 MONTHS FROM DATE OF ORIGINAL PURCHASE. IN NO CASE SHALL THE COMPANY BE LIABLE FOR ANY CONSEQUENTIAL OR
INCIDENTAL DAMAGES FOR BREACH OF THIS OR ANY OTHER WARRANTY, EXPRESS OR IMPLIED, WHATSOEVER. No person or
representative is authorized to assume for the Company any liability other than expressed herein in connection with the sale of this product.
Some states do not allow limitations on how long an Implied warranty lasts or the exclusion or limitation of Incidental or consequential damage
so the above limitations or exciusions may not apply to you. This Warranty gives you specific legal rights and you may also have other rights
which vary from state to state.
U.S.A.: AUDIOVOXELECTRONICSCORPORATION,150MARCUSBLVD.,HAUPPAUGE,NEWYORK 11788 y'1-800-645-4994
CANADA: CALL 1 -800-645-4994 FOR LOCATION OF WARRANTY STATION SERVING YOUR AREA
90 DAY LIMITED WARRANTY
Applies to Audiovox Video Products
Loading...