Page 1
Quick Start Guide
Page 2
Please refer to the following quick start guide as an
overview to use the
1. Turn the vehicle ignition key to the ON
position. Turn on your Vehicle Entertainment
System (VES) and select the source input to
which the
Watching the
period of time with the engine OFF will run
down the vehicle’s battery.)
2. The VES screen will show the FLO TV splash
screen and then the FLO TV preview channel.
3. If you are not subscribed, subscribe to the
TV
service by calling 888-99-FLOTV or by
going online to www.flotv.com
and Authorization Code of the FLO TV module
are required for subscription. Press the
(Settings) key on the remote to access the
Settings Menu. Press the ▼ (down arrow) key to
highlight Subscription Information and press
(OK) key on the remote. Your Device ID
the
FLO TV
FLO TV
FLO TV
™ service:
service is connected. (Note:
service for an extended
FLO
. The Device ID
Page 3
and Authorization Code will be displayed on
the VES screen.
FLO TV
4. Once subscribed to the
(Guide) key on the remote to access the
the
FLO TV Channel Guide.
5. Press the ▲ (up arrow) or ▼ (down arrow) key
on the remote to change channels.
6. The arrow keys on the remote allow for
navigation through the Channel Guide.
7. Press the
desired channel/show from the Channel Guide.
8. Press the
display the program information related to the
current program.
9. Press the
access the FLO TV user settings menu (e.g.
Parental Control, etc.).
10. The
user to switch between the
an auxiliary A/V source if one is connected.
(OK) key on the remote to select a
(Information) key on the remote to
(Settings) key on the remote to
(Mode) key on the remote allows the
service, press
FLO TV
service and
11. Visit www.flotv.com for more info.
Page 4
Copyright © 2010 Audiovox Corporation
1.26.2010 128-8714A
Loading...