Audiovox FD-250 User Manual

OWNER'S MANUALOWNER'S MANUAL

OWNER'S MANUAL

OWNER'S MANUALOWNER'S MANUAL

ELECTRONICALLY-TUNED

AM/FM/MPX RADIO WITH

AUTO-REVERSE CASSETTE PLAYER,

CD CHANGER CONTROLS

AND QUARTZ CLOCK

Model FD-250

OPERATING INSTRUCTIONS

3 bn bs



c s

btcm

RADIO AND CASSETTE CONTROLS

1 ON-OFF POWER BUTTON

Press this button to turn the unit on or off.

8 bu

b r

bq bp

ctco

cpcq9

2 VOLUME/LEVEL CONTROL

To increase the volume level, press the side of the control. The volume will increase and the level will be shown by the bars on the display panel. To increase the volume quickly, keep the button pressed. To decrease the volume level, press the side of the control. Keep the button pressed to decrease the volume quickly. This control is also used in conjunction with the Menu button 3 to adjust the bass, treble, balance and fader levels as described in 4, 5 , 6 , and 7 .

3 MENU BUTTON

VOLUME LEVEL MEMORY

This button is used to select the audio function ( bass, treble, balance, or fade) to be adjusted using the Level control 2 .

Pressing the Menu button once will select the audio functions in sequence of bass (“BAS” on display), treble (“TRE”), balance (“BAL”), and fader (“FAd”). The display will automatically return to the normal indication 5 seconds after the last adjustment is made or when another function is activated.

This button is also used to set the memory for the volume level which will be recalled when the unit is turned on. To set the volume memory, turn the unit on and adjust the volume using the Volume/Level Control on. Then, press the Menu button and hold it for approximately 2 seconds. The volume level bars on the display panel will flash twice and the volume is now set in the memory. If the unit is turned off with the volume higher than the memory setting, the unit will return to the memory setting when tuned back on. If, however, the unit is turned off with the volume lower than the memory setting, the unit will return to the lower setting when turned back on.

2 to the level which you wish to be recalled when the unit is turned

-1-

4 BASS CONTROL

To adjust the bass level, first select the Bass mode by pressing the Menu button 3 once so the “BAS” indication appears on the display panel. Within 5 seconds of choosing the Bass mode, press the or side of the Level control 2 to adjust the bass response as desired. The level will be shown by the bars on the display panel from a minimum of

of the display represents flat response). The display will automatically return to the normal indication 5 seconds after the last adjustment or when another function is activated.

 to a maximum of  (the diamond in the center

5 TREBLE CONTROL

To adjust the treble level, first select the Treble mode by pressing the Select button 3 twice so the “TRE” indication appears on the display panel. Within 5 seconds of choosing the Treble mode, press the or side of the Level control 2 to adjust the treble response as desired. The treble level will be shown by the bars on the display panel from a minimum of  to a maximum of  (the diamond in the center

of the display represents flat response). The display will automatically return to the normal indication 5 seconds after the last adjustment or when another function is activated.

6 LEFT/RIGHT BALANCE CONTROL

To adjust the left-right speaker balance, first select the Balance mode by pressing the Select button

3 three times so the “BAL” indication appears on the display panel. Within 5 seconds

of choosing the Balance mode, press the side of the Level control 2 to adjust the stereo balance to the left channel speakers or the side of the control to adjust it to the right channel speakers. The balance position will be shown by the bars on the display panel from L  R (full left) to L  R (full right). When the volume level between the left and right speakers is equal, L  R will be shown on the display panel. The display will automatically return to the normal indication 5 seconds after the last adjustment or when another function is activated.

7 FRONT/REAR FADER CONTROL

To adjust the front-rear speaker balance, first select the Fader mode by pressing the Select button 3 four times so the “FAd” indication appears on the display panel. Within 5 seconds of choosing the Fader mode, press the or side of the Level control 2 to adjust the front-rear speaker levels as desired. The fader position will be shown by the bars on the display panel from F  R (full front) to F  R (full rear). When the volume level between the front & rear speakers is equal, F  R will be shown on the display panel. The display will automatically return to the normal indication 5 seconds after the last adjustment or when another function is activated.

8 AM/FM BAND SELECTOR

Each time this button is pressed, the radio band is changed. The indication “AM”, “FM1”, or “FM2” will appear on the display panel according to your selection.

9 MANUAL UP/DOWN TUNING ( TUNE )

AUTOMATIC SEEK TUNING

To manually select a radio station, momentarily press the Up Tuning ( ) side of the button to advance the unit one digit higher or the Down Tuning ( ) side of the button to tune downward. Continue to press either side of the button to tune the radio rapidly in the selected direction.

Pressing either side of the button for longer than 0.5 seconds and then releasing will activate the Automatic Seek Tuning function in the selected direction. The radio will seek the next available station and stop at that frequency. The Seek function can be stopped by pressing the button again or activating any other tuning function.

-2-

+ 5 hidden pages