Audiovox 1287343, DT85 User Manual

DT85

8.5” PORTABLE DVD PLAYER

Operation Manual

128-7343

Introduction

Thank you for choosing the DT85 portable DVD player. The unit applies the latest state of the art electronics and is designed to be used in a variety of applications. It can be used as portable DVD player or when installed into the available docking stations as a home or mobile DVD player. The DVD Player is constructed to provide years of reliable, trouble-free service, and is compact so that you can take it with you anywhere and is designed for quick and easy setup. Please read all documentation prior to using this product. The documentation will assist you in obtaining the best equipment performance. Save this manual for later use.

Important Notice

It is unlawful in most jurisdictions for a person to drive a motor vehicle which is equipped with a television viewer or screen that is located in the motor vehicle at any point forward of the back of the driver’s seat, or that is visible, directly or indirectly, to the driver while operating the vehicle. In the interest of safety, this system should never be installed where it will be visible, directly or indirectly, by the operator of the motor vehicle.

Safety Precaution

For safety reasons, when changing video media, it is recommended that the vehicle is not in motion, and that you do not allow children to unfasten seat-belts to change video media or make any adjustments to the system. Enjoy your entertainment system but always remember-safety of all passengers remains the number one priority.

Cautions And Warnings

RISK OF ELECTRIC SHOCK

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of un-insulated “dangerous Voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing ) instructions in the literature accompanying the appliance.

1. Placement

To prevent fire or electric shock, do not expose this appliance to rain or moisture. Do not place the set on an unstable cart, stand, tripod, bracket or table to prevent it from falling. Keep the DVD Player away from strong magnets, heat sources, direct sunlight, and excessive dust. If the DVD Player is brought directly from a cold to a warm location, moisture may condense inside the DVD Player. When you move it from a cold to a warm location, wait for about one hour before operating the DVD Player, or remove the disc and leave the DVD Player turned ON until the moisture evaporates.

2. Caution

Do not spill or spray liquid of any kind on or in the system (this may result in a fire or electric shock). Do not place anything heavy on the DVD Player. To ensure proper ventilation and proper operation, never cover or block the slots and openings with a cloth or other material. Keep the DVD Player away from an open flame such as fire, candle etc. It is hazardous to replace the battery incorrectly. Replace the battery only with the same or equivalent type, in order to protect the environment, please dispose the dispose the battery properly.

3. Warning

To reduce the risk of electric shock, do not perform any servicing other than that contained in the operating instructions unless you are qualified to do so. There are no user-serviceable parts inside. Refer all servicing to qualified service personnel. Servicing should be done only by qualified service personnel.

4. Cleaning DVD Player

When cleaning, make sure the system is unplugged from the power source. Do not use liquid cleaners or aerosol cleaners. Use a cloth lightly dampened with water for cleaning the exterior of the system only.

5. Disc

Do not use irregularly shaped discs such as heart or star-shaped discs as they may cause the DVD Player to malfunction. Do not stick paper, tape or glue on the disc. Do not expose the disc to direct sunlight or heat sources. Do not touch the surface of disc. Handle the disc by its edge. Clean the disc by wiping the disc from the center out with a cleaning cloth. Remove the disc from the DVD Player and store it in its case after playing. Software producers may intentionally fix some playback operations of discs. Since this DVD Player plays discs according to the disc contents the software producers designed, some playback features may not be available. Also refer to the instructions supplied with the discs.

DO NOT OPEN

Materials Included In This Package

1) Shuttle Portable Player with 8.5" LCD Monitor (P/N: 136-3950) ~ 1pc

2) Headrest Mounting Bag (P/N: 126-1328) ~ 1pc

3) Rechargeable Lithium Polymer Battery Pack 4000mAH (P/N: 136-3951) ~ 1pc

4) Remote Control (P/N: 136-3887) ~ 1pc

5) AC to DC Power Adaptor Cable (P/N: 112-3513) ~ 1pc

6) DC Power Adaptor Cable (P/N: 112-3515) ~ 1pc

7) AV Adapter Cable (P/N: 112B3227) ~ 1pc

8) Canvas Carrying Bag (P/N: 126-1327) ~ 1pc

2. 3.

VOL

Main Features

• 8.5” Active Matrix TFT LCD Monitor

• Built-in DVD Player

• DVD/CD/MP3 Compatible

• On Screen Display

• Selectable Screen Aspect Ratio 16:9, 4:3 & Screen Off

• AC and DC Power Adapters

• Last Position Memory for Disc Playback

• Switchable AUX AV In/Out

• Picture Controls

• IR Sensor

• Headphone Jacks

• Built-in IR Transmitter for Wireless headphone

• Full Function Remote Control

Main Features

Front Panel Controls

1 2 3 4 5 6 7 8 9 10 11

1. Power ON/OFF* — Press and hold for one second to switch the DT85 on or off.

2. Screen Mode — To select the screen mode aspect ratio and to turn the screen off (16:9, 4:3

or Off).

3. Pause — Allows the user to pause playback and move forward one frame at a time (STEP). Press play to return to normal playback mode.

4. Previous — Go to the previous track / chapter.

5. Volume (-) — To decrease the volume of the speakers. Also used for reducing levels in the

Picture adjustment mode.

6. Picture Select — Used to access the DT85 picture adjustments, select from picture adjust,

volume level.

7. Volume (+) —To increase the volume of the speakers. Also used for reducing levels in the picture adjustment mode.

8. Next — Go to the next track or Chapter.

9. Play — This button is used to enter the play mode.

10. Stop — This button is used to stop playback.

11. Eject* — Press and hold for one second to Eject the Disc.

12. Infrared Transmitter and sensor — Used to transmit audio to the optional wireless

Headphones. Also allows the remote control to operate the DT85.

Note: The power and eject function require the button to be pressed for one second to prevent accidentally accessing these functions.

System Controls and Connections

Left Side Controls and Connections

IN OUT

324

ON OFFVIDEO

IRT

DC 9V

1 2

AUDIO

IN/OUT

1. Headphone Jacks — Used to connect wired headphones. The sound from the speakers will

be automatically cut off when the headphones are connected.

2. AV In/Out Switch

Input Mode

When the AV In/Out switch is set to IN* the unit is ready to accept an auxiliary audio/video signal via the audio video inputs.

*Note: The A/V input is auto-switching. Even though the switch is set to IN it will only be active when a A/V source is connected. When an auxiliary A/V signal is input the OSD will display “AUX”.

Connect an external A/V Source using the supplied A/V adapter cable to the A/V input jacks. The source can be any external A/V device (i.e. Camcorder, digital camera video game etc)

Output Mode

This output will provide an audio/video signal that duplicates the signal displayed on the DT85.

This can be used to connect the DT85 to another monitor or amplifier.

3. IR Transmitter On/Off Switch — Used to turn the IR Transmitter on or off. When operating

the player with the battery if wireless headphones are not being used set this switch to the Off position to increase the playback time.

4. 9V DC Input Jack — Used to connect power from either the supplied AC to DC adapter or the

vehicle power adapter.

Right Side Panel Controls and Connections

1. DVD Disc Slot — for loading and removing discs.

2. Built-in Stand — for desktop use when the battery is not being used.

Remote Control

5 6

VOL

7 8

11 12 13 14 15

1. Power — Turn the DT85 on and off.

2. Display — Display disc information (title,

chapter, time, track, etc.)

3. Angle — Displays and selects the available camera angles. Each time you press the button, The angle changes. The number of angles varies from disc to disc.

26 25

22 21

18 17

adjustments are made within 6 seconds, or if any other button is pressed.

7. Volume pq — To increase or decrease the volume level and the picture levels in the picture adjustment mode.

8. DVD Menu — Allows the user to access the DVD root menu.

4. Subtitle — Display the subtitle language of the DVD disc (if the disc was created with subtitles). Each time you press the button, the subtitle language will change.

5. Audio — Press to access the available Audio languages, when the DVD disc contains multiple audio languages.

6. PIX (Picture Select) — Each time this button is pressed, the unit will display the “adjustment bars” for Contrast, Brightness, Color or Tint. Once the desired a djus tmen t bar is displayed, use the Volume Up and Down buttons to adjust the setting. The display will automatically turn off if no

9. Cursor (36 34) — Use these buttons to Navigate the DVD menu and the set up options.

10. Return — Not used in this model

11. A-B — Allows the user to repeat playback

of a DVD or CD from point A to point B.

12. Rew (7) — Allows the user to search in a backward direction at 2, 4, 8 and 20 times the normal playback speed of a DVD.

13. Fwd (8) — Allows the user to search in a forward direction at 2, 4, 8 and 20 times the normal playback speed of a DVD.

+ 16 hidden pages