Audiovox DS7321 Owner's Manual

Download

Page 1

DS7321/DS7321PK

Portable DVD Player

Owner’s Manual

Page 2

WARNINGS AND CAUTIONS

Notice

This Product incorporates copyright protection technology that is protected by method claims of

certain U.S. Patents and other intellectual property rights owned by Macrovision Corporation and

other rights owners. Useofthiscopyright protection technology must be authorized by Macrovision

Corporation, and is intended for home and other limited viewing uses only unless otherwise

authorized by Macrovision Corporation. Reverse engineering or disassemblyisprohibited.

Notice

An LCD panel and/or videomonitormaybeinstalledin a motor vehicle and visible to the driver if the

LCD panel orvideo monitor is used for vehicle information, systemcontrol,rear or side observation

or navigation. If the LCD panel or video monitor is used for television reception, video or DVD play,

the LCD panel or video monitor must be installed so that these features will only function when the

vehicle is in "park" or when the vehicle'sparkingbrakeisapplied.

An LCD panelor video monitor used for television reception, video or DVD playthat operates when

the vehicle is in gear or when the parking brake is not applied must be installed to the rear of the

driver's seat where it willnot be visible, directly or indirectly, to the operator ofthe motor vehicle.

Licensed under one or moreof the following patents:

Patent Numbers: 5,583,936; 6,381,747; 6,516,132; 6,836,549; and 7,050,698.

-2-

Page 3

WARNINGS AND CAUTIONS

Placement

To prevent fire or electricshock, do not expose this applianceto rain or moisture.

Do not place the seton an unstable cart, stand, tripod, bracket ortable to prevent it from falling.

Keep the unit away fromstrong magnets, heat sources, direct sunlight, or excessivedust.

If the unit is broughtdirectly froma cold to a warmlocation, moisturemay condense inside the unit.

When you move it from a cold toa warm location, wait for about one hour before operating theunit,

or remove the disc andleave the unit turned on until the moistureevaporates.

Installation

Ensure that the unit is installed and used in accordance with the instructions and illustrations

provided in this manual.

Objects and Liquids

Do not push objects of any kind into the unit through openings.

Do not spill, splash or spray liquid of any kind on or in the system (this may result in a fire or

electric shock).

Do not place anything heavyon the unit.

Do not place any openflame sources, such as lighted candles, on theunit.

Ventilation

To ensure proper ventilation and proper operation, never cover or block the slots and

openings with a cloth or other material.

Disassembly

Do not attempt to disassemble the case or replace the battery. There is a risk of electric shock

and/or exposure to Laser Radiation. Contact qualified service personnel if your system is in

need of repair.

Cleaning the Unit

When cleaning, make sure thesystem is unplugged from the power source.

Do not use liquid cleanersor aerosol cleaners.

Use a cloth lightly dampenedwith water for cleaning the exterior of theDVD Player system only.

-3-

Page 4

WARNINGS AND CAUTIONS

Headphones

Excessive sound pressure from headphonescan cause hearing loss.

Connect earphones or headphones to the headphone jack with the volume set low and

increase it if required. When earphones or headphones are connected, no sound will be

emitted from the connected speaker system.

Disc

Do not use irregularly shaped discs such as heart or star-shaped discs as they may causethe unit

to malfunction.

Do not stick paper, tape or glue onthe disc.

Do not expose the discto direct sunlight or heat sources such ashot air ducts.

Do not touch the surfaceof the disc.

Handle the disc by itsedge.

Clean the disc by wipingthe disc from the center out with acleaning cloth.

Remove the disc from theunit and store it in its case afterplaying.

Some playback operations of discs may be intentionally fixed by software producers. Since

this unit plays discs according to the disc contents the software producers designed, some

playback features may not be available. Also, refer to the instructions supplied with the discs.

-4-

Page 5

CONTENTS

Warnings and Cautions..................................................................2

Contents.......................................................................................5

Introduction...................................... ............................................6

Vehicle Installation........................................................................7

Charging the Battery .....................................................................8

Controls and Indicators..................................................................9

Remote Control Operation.............................................................11

Connecting to a TV.......................................................................15

System Setup..............................................................................16

Playback.....................................................................................24

Specifications..............................................................................28

Troubleshooting...........................................................................29

Owner’s Notes.............................................................................30

-5-

Page 6

INTRODUCTION

Thank you for selecting the DS7321/DS7321PK Portable DVD Player. The main features include a 7" Swivel Screen (16:9 Aspect Ratio) Liquid Crystal Display (LCD) monitor and a DVD Player.

The unit incorporates the latest state-of-the-art electronics and is designed for use in hotels, offices, homes or vehicles. The unit is constructed to provide years of reliable, trouble-free service, is compact so that you can take it with you anywhere, and is designed for quick and easy installation.

Please read the entire instruction manual supplied with this product prior to operation. The documentation will assist you in installing the system properly to obtain the best equipment performance. Please save this manual for later use.

Features

270-degree Rotatable 7" LCD Screen

Two Optional Aspect Ratios 16:9 and 4:3

Remote Control

3.5mm Headphone Jack

Audio/Video Output Jack

Compatible with DVD, VCD, CD, MP3, CD-R, DVD-RW, JPEG, Kodak Picture CD, etc.

Support Playback Control: Play, Pause, Stop, Fast Forward Playback, Fast Reverse Playback, etc.

2 Hour Playback

Internal Rechargeable Li-Polymer Battery

Operated with 9-12 VDC Power Supply

Package Contents

1. 1 X Instruction Manual

2. 1 X Remote Control

3. CR2025 ithium attery

1X L B

4. 1 XAC/DC Adapter

5. 1 X Vehicle DC Power Adapter

6. 1 X Carry/Headrest Bag*

7. 2 X Headphone*

8. 1 X Headphone Splitter*

* DS7321PK only

-6-

Page 7

VEHICLE INSTALLATION

INSTALLING THE DVD PLAYER ON A SEAT BACK IN A CAR

(DS7321PK only)

1. Unfold the carry bag, and place the DVD Player on the bag beneath the elastic straps. Ensure that the unit's corners are secured by the elastic straps. Ensure that the center strap is across the face of the DVD Player.

2. Secure the upper portion of the carry bag to headrest support bars using the headrest strap. Adjust the headrest strap until the bag is firmly secured.

3. Secure the lower portion of the carry bag to the vehicle seat back using the seat back strap. Adjust the seat back strap until the bag is firmly secured.

-7-

Page 8

CHARGING THE BATTERY

The player is powered by a lithium-polymer battery. It has no memory effect and thus it can be recharged at any time regardless of whether it is fully or partially discharged.

The unit can be recharged when it is powered on or off. When the power is off, it takes about 3 4 hours to fully charge the battery. When the power is on, it takes

～

approximately ten hours to charge the battery. When fully charged, the battery can be used for about two hours.

The unit can be charged using the AC/DC Adapter or the Vehicle DC PowerAdapter.

By AC/DC Adapter:

Connect the AC/DC adapter to the the unit, then plug the adapter into a 0 VAC outlet.

By Vehicle DC PowerAdapter:

Plug one end of the dapter into the jack on the unit, then plug the other end into the socket of a car. Do not charge the DVD player in the vehicle when the vehicle is not running.

While the unit is charging, the red charge indicator will flash. When the battery is fully charged, the red charge indicator will be steadily lit.

Vehicle DC Power A DC IN 9-12V

Use and Maintenance of the Rechargeable Battery

DC IN 9-12V jack on

vehicle DC accessory

1.The working temperature of the rechargeable battery 3 F 0 C to 95 F (35 C)

2. Always unplug the unit when it is not being used or charged.

3. If you do not plan to use the battery for an extended period of time (one week or longer), we recommend that you fully charge the battery. For longer periods of storage, please recharge the battery at least once every two months to maintain the battery in optimum condition.

4. Once the battery is fully discharged, immediately recharge the battery (regardless of whether you plan to use the DVD player or not) in order to maximize battery life.

5. Recharge efficiency will degrade when temperatures drop below 50 F (10 C) or exceed 95 F (35 C).

6. The battery compartment contains a temperature sensor. If the temperature exceeds 104 F (40 C) when charging the unit, the power will turn off automatically and the red charge indicator on the side of the unit will flash. In this case, disconnect the power adapter, wait for the unit to cool down, then reconnect the power adapter.

7. Heat is produced during charging. This is normal.

8. Do not subject the battery to strong impacts.

9. Keep the battery away from humidity and excessive heat.

10. The battery is not user serviceable. Please contact Audiovox in the event the battery

will not charge.

°°

is 2 ° ( ° ) ° ° .

°°

-8-

Page 9

CONTROLS AND INDICATORS

1. DISPLAY SCREEN

2. SPEAKER OUTPUT

3. PREVIOUS( )BUTTON Press to skip to the previous chapter/track.

4. NEXT ( ) BUTTON Press to skip to the next chapter/track.

5. FAST REWIND ( ) BUTTON

Press repeatedly for fast reverse playback. The available speeds are 2X, 4X, 8X, 16X, and 32X.

6. FAST FORWARD ( ) BUTTON Press repeatedly for fast forward playback. The available speeds are 2X, 4X, 8X, 16X, and 32X.

7. PLAY/PAUSE ( ) BUTTON Press once to pause playback, then press again to continue playback.

8. MENU Press to return to the root menu when playing a DVD.

9. MUTE Press this button to temporarily switch the sound off. Press it again to switch the sound on.

10. RED LED CHARGE INDICATOR Flashes when the battery is charging. Steadily lit when the battery is charged.

11. INFRARED REMOTE SENSOR

12. GREEN LED ON/OFF INDICATOR Steadily lit when the unit is on.

13 VOL- BUTTON

Press to decrease the volume.

14 + UTTON

.VOL B

Press to increase the volume.

15. OPEN BUTTON

Press to open the disc tray cover.

-9-

Page 10

CONTROLS AND INDICATORS

7 Swivel LCD Screen″

Side View

1. 3.5mm HEADPHONE JACK

Note:

When headphones are connected, no sound will be emitted from the speakers.

2. AV OUT JACK

3. ON/OFF SWITCH Slide the switch to ON position to turn on

the unit Slide the switch to OFF position to switch off the unit.

4. DC IN 9-12V JACK

The LCD screen is connected to the main body of the player via a rotatable hinge. The screen can be rotated clockwise horizontally from the beginning position and counterclockwise from the ending position by 270 degrees. You can open up the screen and rotate it the same time.

: Do not rotate the screen beyond its maximum extent. Forcing the screen beyond

Note

its maximum extent will damage the unit.

Beginning Position

Ending Position

-10-

Page 11

REMOTE CONTROL OPERATION

BATTERY INSTALLATION/REPLACEMENT

Remove the battery compartment cover according to the diagram on the right. 1: Press the ridged area to the left. 2: At the same time, pull the battery tray out. 3: Remove the old CR2025 battery. Replace it with a

new CR2025 lithium battery on the tray with the positive side facing upward.

4: Replace the cover.

Do not expose the battery to excessive heat.Note:

REMOTE CONTROL FUNCTIONS

1. ANGLE

4 5 6

Press to switch the viewing angles.

Note:

This function only works with discs encoded with multiple camera angles.

2. FUNCTION Press to switch between the 16:9 and 4:3 aspect ratios.

3. SETUP Press to enter/exit the Setup Menu.

4. REPEAT Press to switch the repeat modes.

Note:

For VCD2.0 discs, this function is invalid when the PBC function is activated.

5. TITLE Press to return to the title menu of a DVD disc.

6. PREVIOUS ( )/UP Press to skip to the previous chapter/track. Press to navigate in an up direction when a menu is displayed on the screen.

7. FAST REWIND ( )/LEFT Press repeatedly for fast reverse playback. The available speeds are 2X, 4X, 8X, 16X, and 32X. Press to navigate in a left direction when a menu is displayed on the screen.

-11-

Page 12

REMOTE CONTROL OPERATION

8. SUBTITLE

Press repeatedly to switch/show the subtitle(s) or turn off the subtitle function.

Note:

This function only works

with discs encoded with subtitles.

9. PLAY ( )

10. DIGIT KEYS

11. G OTO

12. MUTE

13. AUDIO

Press to start a playback or resume normal playback from fast forward, fast reverse, slow-motion, frame-by-frame playback, etc.

The digit keys can be used to input

numbers or make selection of a track, a chapter, etc.

During playback, press to enter the GOTO menu. In the menu, use the UP/DOWN direction buttons to select a menu item. Press ENTER to edit. Use the digit keys to input a specific track, disc time, track time, chapter, title, chapter time or title time to go to directly. Press it again to exit the GOTO menu.

Press this button to temporarily switch the sound off. Press it again to switch the sound on.

Press repeatedly to select the audio languages available on the disc (for DVD). Press repeatedly to switch the audio channels available on the disc (for VCD).

Note:

This function only works with discs encoded with different audio languages.

-12-

Page 13

REMOTE CONTROL OPERATION

14. A-B REPEAT Press to repeat a specific section of a disc. Press this button to mark down the starting point (A) and press it again to mark down the ending point (B). The

14 15

16 17

unit will play back this section over and over again. Press this button a third time to cancelA-B repeat and resume normal playback.

Note:

Points A and B must be in the

same title/ track.

15. MENU Press to return to the root menu when playing a DVD. When playing a disc encoded with the PBC function, press to display the PBC menu. Press it again to disable the PBC function.

Note:

A VCD2.0 disc has a PBC function while DVD, VCD1.1, CD-DA, and MP3 discs have no PBC functions.

16. FAST FORWARD ( )/RIGHT Press repeatedly for fast forward playback. The available speeds are 2X, 4X, 8X, 16X, and 32X. Press to navigate in a right direction when menu is displayed on the screen.

17. ENTER Press to enter a highlighted item in a menu or to confirm and execute a selection.

18. STEP Press repeatedly to advance the video frame by frame. Press Play ( ) to resume the normal playback.

Applies to DVD, VCD, etc.

Note:

-13-

Page 14

REMOTE CONTROL OPERATION

19. NEXT ( )/DOWN Press to skip to the next chapter/track. Press to navigate in a down direction when menu is displayed on the screen.

20. STOP ( )

Press once to pause a playback, then press Play ( ) to continue playback. Press twice to stop playback.

21. PAUSE ( )

Press to temporarily pause playback; press it again or press Play ( ) to

22 23

resume playback.

22. ZOOM Press to zoom in/out of a scene. The available zoom ratios are 2X, 3X, 4X, 1/2, 1/3, and 1/4. In zoomed-in mode, the direction keys can be used to move the zooming center.

Applies to DVD, VCD, etc.Note:

23. OSD

Press repeatedly to display title elapsed time, title remaining time, chapter elapsed time or chapter remaining time, or hide the display.

24. VOL+/VOL-

Press VOL+ to increase the volume. Press VOL- to decrease the volume.

-14-

Page 15

CONNECTING TO A TV

This player has an AV OUT jack. You can connect it to a TV for viewing.

Use an AV cable (not supplied) to connect the AV OUT jack to the video input terminal, L/R channel audio input terminals of a TV.

After the connection has been correctly made, turn on the connected TV and set it to AV mode. You can then view the video with the connected TV.

-15-

Page 16

SYSTEM SETUP

The System Setup menu allows you to personalize the DVD Player settings to your preference. Once the initial settings are set, they are retained in the DVD player until modified.

MENU OPERATION

1. Press the SETUP button on the remote control to show the Setup Menu.

2. Press the LEFT ( ) or RIGHT ( ) button to select the GENERAL,AUDIO, DOLBY, VIDEO or PREFERENCE setup page. The submenu of the selected page appears.

3. Press the UP ( ) or DOWN ( ) button to select an item you desire to set in the submenu, then press the ENTER or RIGHT ( ) button to enter.

4. Press the UP ( ) or DOWN ( ) button to select an option, then press the ENTER button to confirm, or press the LEFT ( ) button to cancel.

5. Press the UP ( ) or DOWN ( ) button to continue to set other items in the submenu.

6. Press the LEFT ( ) button to return to the upper menu.

7. Press the SETUP button again to exit the Setup Menu.

GENERAL SETUP PAGE

There are six items in the GENERAL SETUP PAGE. They are TV DISPLAY,ANGLE MARK, OSD LANGUAGE, CLOSE CAPTIONS, SCREEN SAVER, and LAST MEMORY.

TV DISPLAY

If the unit is connected to a conventional TV set, select or

LETTERBOX

the unit is connected to a wide-screen TV set, select .

Options: 4:3 PANSCAN:

4:3 LETTERBOX:

16:9:

. The 4:3 image will be displayed in full screen in its native aspect ratio. If

4:3 PANSCAN 4:3

16:9

The wide-screen image will be displayed on the screen in its native

aspect ratio with some part on the left and right cut off.

The wide-screen image will be displayed in its native aspect ratio with

black bands on the upper and lower sections of the screen.

The wide-screen image will be displayed in full screen in its native

aspect ratio The 4:3 image will be stretched out horizontally to fit in the screen.

-16-

Page 17

SYSTEM SETUP

ANGLE MARK

This function is available when a disc is encoded with multiple camera angles.

Options:

Enables the Angle Mark function. When a disc with multiple camera angles is

ON:

playing, an angle mark will display on the screen. You can then view the video of different camera angles by pressing the ANGLE button on the remote control. Set this item to OFF to hide the angle mark.

OFF:

OSD LANGUAGE (On-Screen Display Language)

This function allows you to set the language for the on-screen display.

Options: ,

English French, Spanish

CLOSED CAPTIONS

This function is available when a disc is encoded with closed captions.

Options: ON:

Enables the Closed Caption function. When a disc encoded with closed captions, the closed captions will be shown on the screen.

OFF:

Set this item to OFF to hide closed captions.

You can also press the SUBTITLE button on the remote control to show or hide the closed captions.

SCREEN SAVER

When the player is not in use for several minutes (for example the disc is paused, stopped etc) a running DVD logo will move across the LCD screen to protect the LCD screen.

Options: ON:

Enables the Screen Saver function. If the image remains motionless on the screen for several minutes, a screen saver will appear on the screen. You can press any key or button to wake the screen up.

OFF:

Disables the Screen Saver function.

LAST MEMORY

During playback or in a paused status the Last Memory function will memorize the last playback time each time you open the disc tray. The next time you insert the same disc and close the disc tray to load the disc, the unit will play from the memorized point.

Options:

: Enables the Last Memory function.

: Disables the Last Memory function.

OFF

-17-

Page 18

SYSTEM SETUP

AUDIO SETUP PAGE

There is one item in the AUDIO SETUP PAGE - ANALOG AUDIO.

ANALOG AUDIO

DOWNMIX

This function only applies to Dolby AC-3 encoded 5.1-channel discs.

Options: LT/RT: . STEREO:

The 5.1-channel audio is mixed into the left channel and right channel

The 5.1-channel audio is mixed into a stereo signal.

-18-

Page 19

SYSTEM SETUP

DOLBY DIGITAL SETUP PAGE

There are two items in the DOLBY DIGITAL SETUP PAGE. They are DUAL MONO and DYMAMIC.

DUAL MONO

Note:

This function only applies to the Dolby AC -3 encoded 2-channel discs.

Options: STEREO:

L-MONO:

R- MONO:

MIX- MONO:

The player outputs the left-channel audio and right-channel audio via the

left and right speaker respectively.

The player outputs the left-channel audio only via both the left and right

speaker.

The player outputs the right-channel audio only via both the left and right

speaker.

The player outputs the average signal of the left-channel and right-channel

audio via the left speaker and the right speaker

DYNAMIC

When you watch movies with a large dynamic at a low volume, you can adjust the dynamic value up to avoid losing sound details resulting from the low volume.

Options: Off to Full:

Adjust the slider bar to the desired level.

-19-

Page 20

SYSTEM SETUP

VIDEO SETUP PAGE

There are two items in the VIDEO SETUP PAGE. They are COLOR SETTING and PANELQUALITY.

COLOR SETTING

The COLOR SETTING menu is used to set up the picture quality when connected to an external TV set

Options: SHARPNESS:

BRIGHTNESS:

CONTRAST:

GAMMA:

HUE:

SATURATION:

Adjusts the edge enhancement of the picture. There are three options:

HIGH, MEDIUM, and LOW.

Adjusts the black level in the picture. Press LEFT ( ) or RIGHT ( ) adjust the value, then press ENTER to confirm it. Adjusts the level of the brightest highlights in the picture. Press LEFT ( ) or RIGHT ( ) to adjust the value, then press ENTER to

confirm it. Adjusts the balance between bright and dark areas in the picture. There are four options: HIGH, MEDIUM, LOW, and NONE. Adjusts the level of tint balance. Press LEFT ( ) or RIGHT ( ) to adjust the value, then press ENTER to confirm it. Adjusts the level of color intensity. Press LEFT ( ) or RIGHT ( ) to adjust the value, then press ENTER to confirm it.

PANEL QUALITY

The PANEL QUALITY menu is used to set up the picture quality of the LCD screen.

Options: SHARPNESS:

BRIGHTNESS:

CONTRAST:

HUE:

SATURATION:

BACKLIGHT:

Adjusts the edge enhancement of the picture. There are three options: HIGH, MEDIUM, and LOW.

confirm it. Adjusts the level of tint balance. Press LEFT ( ) or RIGHT ( ) to adjust the value, then press ENTER to confirm it. Adjusts the level of color intensity. Press LEFT ( ) or RIGHT ( ) to adjust the value, then press ENTER to confirm it.

Adjusts the level of illumination of the LCD screen. Press LEFT ( ) or

RIGHT ( ) to adjust the value, then press ENTER to confirm it.

-20-

Page 21

SYSTEM SETUP

PREFERENCE PAGE

This item is available if there is no disc in the disc tray, the disc tray is open or the disc in the disc tray is stopped.

There are eight items in the PREFERENCE PAGE. They are TV TYPE, PBC, AUDIO, SUBTITLE, DISC MENU, PARENTAL, PASSWORD, and DEFAULT.

TV TYPE

This function matches video output of the unit to the broadcast system of a connected TV. The unit supports both National Television System Committee (NTSC) and Phase Alternating Line (PAL) television broadcasting standards.

Options: PAL

: Select this mode if the connected TV is a PAL system. The video signal of a NTSC

disc will be output in PAL format.

AUTO

: Select this mode if the connected TV is multi-system. The output format of video

signal will be in accordance with the video signal of the disc.

NTSC

: Select this mode if the connected TV is a NTSC system. The video signal of a PAL

disc will be output in NTSC format.

Note:

For best performance, this setting should remain at NTSC.

PBC (Play Back Control)

This function only works with discs encoded with PBC function such as VCD 2.0 discs. DVD, VCD1.1, CD-DA, and MP3 discs have no PBC menu.

Options: ON:

Activates the PBC function.

OFF:

Disables the PBC function.

-21-

Page 22

SYSTEM SETUP

AUDIO MENU

This item allows a user to select a preferred audio language. This function only applies to discs encoded with different audio languages.

Options:

You can also change the audio language by pressing AUDIO on the remote control.

Note:

default setting is applied.

English, French, Spanish, Chinese, Japanese, Korean, Russian, and Thai.

If the selected language is not available for the currently playing disc, the disc's

SUBTITLE MENU

This item allows a user to select a preferred subtitle language. This function only applies to discs encoded with subtitles.

Options: ,

You can also change the subtitle language by pressing SUBTITLE on the remote control.

Note:

default setting is applied.

English, French, Spanish, Chinese, Japanese, Korean, Russian, Thai and Off.

If the selected language is not available for the currently playing disc, the disc's

DISC MENU

This item allows a user to select a preferred disc menu language.

Options: Note:

default setting is applied.

English, French, Spanish, Chinese, Japanese, Korean, Russian, and Thai.

If the selected language is not available for the currently playing disc, the disc's

PARENTAL

This item allows the user to limit the content of movie playback from Kid Safe toAdult. The lower the value, the more strict the control. Movies rated higher than the level set for the parental lock can not be viewed without entering the correct password.

Options:

1 KID SAFE 2G

3PG 4PG–13 5 PGR 6R 7 NC17 8 Adult

The rating level can be changed only when the correct password is provided.

Note:

This function only works with those discs with parental function

Note: .

-22-

Page 23

SYSTEM SETUP

PASSWORD

This item allows a user to access the Password Setup Page.

Password Setup Page Options: PASSWORD MODE:

PASSWORD:

To change the password:

1. Enter the old password in the OLD PASSWORD row.

2. Enter the new password in the NEW PASSWORD row.

3. Enter the new password again in the CONFIRM PWD row.

Note:

You may reset the password if you forget the old password by using the default password: 3308.

Note:

The default password is 3308. This password is always active even after you have selected your own password and changed it. To avoid the possibility of others using the default password to set the parental level and change the password, record this default password in another area and delete it from this manual.

DEFAULT

This item allows a user to restore all the default settings except the settings in the Password Setup Page and the PARENTAL item.

You can activate or disable the password function by setting it to ON or OFF. You must key in the correct password and press ENTER to confirm before you can change the option The default password is 3308.

Access this item to reset the password.

Options: RESET:

Restores the default settings.

-23-

Page 24

PLAYBACK

DVD BASICS

To get the optimumuse out of the DVD Player, make sure you read thissection completely.

DVD REGION CODE

The DVD player is preset to a region code at the factory depending onwhere the DVD player is sold. A DVD from a different region cannot be played in this unit and the unit will display "WRONG REGION”.

Region 1 - USA, Canada

Region 2 - Japan, Europe, South Africa, Middle East,

Greenland

Region3-S.Korea, Taiwan, Hong Kong, Parts of

South East Asia

Region 4 - Australia, New Zealand, Latin America

(including Mexico)

Region 5 - Eastern Europe, Russia, India, Africa

Region 6 - China

-24-

Page 25

PLAYBACK

TYPES OF DISCS YOUR DVDPLAYER WILL PLAY

Your system will play the followingtypes of discs:

•

DVD* disc - DVD discs whichcontain video.

•

VCD disc - VCD discswhich contain video.

•

Audio disc - Audio CDs contain musical or sound content only.

•

MP3 disc - A disc that contains audio files (for example, a CD-R with downloaded MP3

files).

*Note:

This system is capable of playing most recordable DVD formats. However, due to the

variety of disc manufacturers and software, playback cannot be guaranteed.

TYPES OF FILES YOUR DVD PLAYER WILL PLAY

Your system will play the followingtypes of files: MPEG, MPEG2, MP3, and JPEG.

LOADING AND PLAYING A DISC

Before you load a disc, make sure that it is compatible with the player. Insert the disc with the label facing up.

The following discs be used with this player:

Note: CANNOT

MiniDisc

• Laserdisc

• Super Audio CD (SACD)

• Blu-ray Disc

•

To Load and Play a Disc:

1. Slide the power switch to the ON position.

2. Press the OPEN button to open the disc door. Place a disc in the disc tray with the label side facing up.

3. Close the disc door. The unit will load and play the disc.

-25-

Page 26

PLAYBACK

MP3 DISC PLAYBACK

MP3 is a format for storing digital audio.An audio CD-quality song can be compressed into the MP3 format with very little loss of quality, while taking up much less space. The DVD player plays the songs in the order they were burned on to the disc. When playback is started the elapsed time of the track that is playing will be displayed.

To Play an MP3 Disc:

1. Slide the power switch to the ON position.

2. Insert an MP3 disc into the player. A content menu will display on the screen.

3. Press the PREVIOUS ( ) or NEXT ( ) button to select a folder or a song.

4. Press ENTER to enter the selected folder or play the selected song.

5. Press the REPEAT button to change the play mode:

Note:

You can also use the digit keys to select a folder to enter or a song to play.

Note:

Single: Repeat Once: Repeat Folder: Folder:

During playback of an MP3 disc, press the TITLE button to switch between the FOLDER playback mode and FILELIST playback mode.

Plays a song once.

Repeats the song being played until stop is pressed.

Repeats the songs in a folder until stop is pressed. Plays the songs in a folder once.

-26-

Page 27

PLAYBACK

KODAK PICTURE CD OR JPEG IMAGE CD PLAYBACK

1. Place a Kodak Picture CD or JPEG image CD in the disc tray. The unit will load the disc automatically.

2. Press STOP ( ) to enter the thumbnail mode to preview the pictures.

3. In the thumbnail mode, press the direction keys to select a picture, then press the ENTER, OK or PLAY ( ) buttons to start the playback from the selected picture.

4. If playing a Kodak Picture CD, press the direction buttons and then press ENTER or OK to select Slide Show, Menu, PREV or NEXT at the bottom of the screen.

Slide Show

: Enters the instruction menu for remote key function. In the menu, press

PREV/NEXT

Viewing Files

Play Modes

Press STOP ( ) to enter the thumbnail mode to preview the pictures. Press PAUSE ( ) to pause a playback. Press it again or press PLAY ( ) to resume the playback. Press PLAY ( ) to start a playback or resume to the normal playback.

Skip to the Previous/Next Picture

Press PREVIOUS ( )/ NEXT ( ) to skip to the previous/next picture during playback.

Picture Rotation

Press LEFT ( ) / RIGHT ( ) to rotate the picture counterclockwise/ clockwise during playback.

: Starts slide show playback.

ENTER or OK to turn over to the next menu page and again to exit the instruction menu.

: Turns over to the previous/next page.

Zoom In / Out

During playback, press ZOOM repeatedly to zoom in by 125%, 150% or 200%, or zoom out by 75% or 50%. When the picture is a 50%, press ZOOM to return the picture to its original size. When the picture is zoomed in, use the direction keys to move the picture.

-27-

Page 28

SPECIFICATIONS

Compatible DISC

Signal system

Panel Size

Frequency response

Video output

Audio output

Dynamic range

Laser

Power source

Power consumption

Operating temperature

Battery type

DVD/VCD/CD/MP3

PAL/NTSC

7 inch

20 Hz to 20 kHz

1 Vp-p 75 Ohm unbalanced

1.2 V (±0.2 V) RMS/10 kOhm

≥85dB

Semiconductor laser, Wavelength: 650 nm/795 nm

DC 9-12V

10W

0~35°C

Li Polymer

-28-

Page 29

TROUBLESHOOTING

If your DVD player does not seem to be functioning properly, check the items below before contacting Audiovox Technical Support.

Symptom

No Power

Picture

Thereisno picture displayed on the connected TV.

Sound

Thereisno sound.

Unable to play a disc

The remote control does not function.

Cause(s)

● The adapter is not connected to the

unit securely or is not connected to the power supply.

● The unit is turned off.

● The TV is not connected to this unit

securely with theAV cable.

● The volume is set to the lowest level.

●

The sound is switched off. The disc is in fast forward/reverse

●

playback.

The sound is output through the

●

connected earphone.

●

This disc is placed in the disc tray in the wrong way.

●

The unit isn't compatible with the

disc.

●

Thediscisdirty.

●

There is no battery in the remote

control.

The battery is out of charge.

●

The remote control isn't pointed to

●

the remote sensor.

The remote control is out of its

●

operating area.

The unit is shut down.

●

Remedy

● Connect the adapter to the DC input

jack securely and then plug the adapter into anAC outlet (for AC/DC adapter) or the vehicle DC accessory socket of a car (for vehicle DC power adapter).

● Make sure the unit is turned on.

● Connect theAV OUTjack of this

unit and theAV IN jack of a TV securely with anAV cable.

● Turn up the volume.

●

Press MUTE to switch on the sound.

PLAY to resume the normal

●

Press playback.

●

Pull out the earphone and the sound will output through the builtin speakers.

●

Check that the disc is placed in the

disc tray with its label side upwards.

●

Insert a compatible disc.

See page 25.

Clean the disc.

●

Install a CR2025 lithium battery in

the remote control.

Replace the battery with a new one.

●

Make sure that the remote control is

●

pointed to the remote control sensor.

Make sure the remote control is

●

within the operating area.

Switch off the unit and disconnect it

●

from the AC outlet. Then power on the unit again.

-29-

Page 30

OWNER’S NOTES

-30-

Page 31

-31-

Page 32

128-8952