Audiovox DPF800 User Manual
DPF800
8" DIGITAL PICTURE FRAME
A. Introduction
Thank you for selecting the DPF 800 Digital Picture Frame. The main
features include a 8" Screen (4:3 Aspect Ratio) Liquid Crystal Display
(LCD) monitor, a 3 in 1 card reader and a USB port. The unit applies
the latest state of the art electronics and is designed for use with SD/
MMC, MS memory cards and USB memory devices. The unit is constructed to provide years of reliable, trouble-free service. Please read
the entire instruction manual supplied with this product prior to operation. The documentation will assist you in obtaining the best equipment performance. All manuals should be stored for later use.
B. Cautions and Warnings
1. Placement
To prevent fire or electric shock, do not expose this appliance to
rain or moisture. Do not place the set on an unstable cart, stand,
tripod, bracket or table to prevent it from falling. Keep the unit away
from strong magnets, heat sources, direct sunlight, and excessive dust.
2. Installation
Ensure that the DPF800 is used in accordance with the
instructions and illustrations provided in this manual.
3. Object and Liquid
Do not push objects of any kind into the unit through openings; do
not spill or spray liquid of any kind on or in the system (this may
result in a fire or electric shock). Do not place anything heavy on
the unit. To ensure proper ventilation and proper operation, never
cover or block the slots and openings with a cloth or other
material.
4. Disassembly
Do not attempt to disassemble the cabinet. There is a risk of electric shock. Contact qualified service personnel if your system is in
need of repair.
5. Cleaning Unit
When cleaning, make sure the system is unplugged from the power
source. Do not use liquid cleaners or aerosol cleaners. Use a
cloth lightly dampened with water for cleaning the exterior of the
system only.
2
C. Contents
Presstoturntheonoroff
Presstoaccessthemain
MENU
Presstoscroll rightorviewthe
DC9V
PlugtheACadapter
1. 1 xDPF800 8” Digital Picture Frame
2. 3 xSnap-On Frame Covers (White, Black and Wood Grain)
3. 1 xRemote Control w/Battery (CR2025)
4. 1 xUSB Adapter Cable
5. 1 xAC to DC Power Supply
6. 1 xInstruction Manual
D. Controls and Indicators
Snap-On Frame Covers (White, Black and Wood Grain)
The snap-on frame covers are easily removed by hand. Align the IR
sensor with the IR sensor hole on the frame cover to ensure that
the Remote Control will operate.
Right and Left Side
Top Side
POWER :
POWER:
MENU:
UPCOPYDELETE:
//
copy /delete a photo
DOWNROTATE: /Pressto
rotate a photo
PREVRETURN:
.
viewthepreviousphoto
NEXT:
nextphoto
Power ON/OFFIndicator
LED
unit
Pressto
/
scroll up or
scroll down or
scrollleftPresstoor
3
E. Remote Control Controls and Indicators
PositioningYourFrame
AdjustableStand
Presstoselectfrom
or USB
RemoteControl
CAL/TIME
REPEAT
UPCOPYDEL
//
SOURCE
SDMSMMC
inputs
MENU
Presstoaccess
theMainMenu
ZOOM
Enlargeanimage
NEXTRIGHT
PLAYPAUSEMODE
DOWNROTATE
Rotatethestandtopositiontheframe
verticallyorhorizontally.
//
/
//
/
Keep the frame away from strong magnets, heat sources,
direct sunlight, or excessive dust.
4
F. SETUP
Press ‘MENU’ to display the Main Menu on the screen.
Main SETUP Menu Screen
1) Using the cursor buttons move the selection box to ‘SETTING and
press the ‘PLAY’ button. The general setup page will be displayed
on the screen.
General SETUP Page
5
a).Select SLIDE SHOW TIME using the DOWN button and then
press the RIGHT button to enter the submenu. Select the slide
show display time for each photo (3, 5 or 8 seconds). The factory setting is five seconds. Press MODE to confirm the setting.
Press the LEFT button to return to the main menu.
SLIDE SHOW TIME
b).Select SLIDE WITH MP3 using the DOWN button and then press
the RIGHT button to enter the submenu. Select ON or OFF. The
ON setting will allow any MP3 file to be played while the slide
show is displayed. The factory setting is OFF. Press MODE to
confirm the setting. Press the LEFT button to return to the main
menu.
SLIDE WITH MP3
6
Loading...