A. Introduction
Thank you for selecting the DPF508 Digital Photo Frame. The main
features include a 5" Screen (4:3 Aspect Ratio) Liquid Cryst al Display
(LCD) monitor. The unit applies the latest state of the art electronics
and is designed for use with SD/MMC/MS memory cards and USB
memory devices. The unit is constructed to provide years of reliable,
trouble-free service. Please read the entire instruction manual supplied with this product prior to operation. The documentation will assist you in obtaining the best equipment performance. All manuals
should be stored for later use.
B. Cautions and Warnings
1. Placement
T o prevent fire or electric shock, do not expose the DPF to rain or
moisture. To prevent it from falling do not place the DPF on an
unstable cart, stand, tripod, bracket or table. Keep the unit away
from strong magnets, heat sources, direct sunlight, and excessive dust.
2. Installation
Ensure that the DPF is used in accordance with the instructions
and illustrations provided in this manual.
3. Objects and Liquid
Do not push objects of any kind into the unit through openings; do
not spill or spray liquid of any kind on or in the DPF (this may result
in a fire or electric shock). Do not place anything heavy on the
DPF . T o ensure proper ventilation and proper operation, never cover
or block the slots and openings with a cloth or other
material.
4. Disassembly
Do not attempt to disassemble the DPF. There is a risk of electric
shock. Contact qualified service personnel if your system is in
need of repair .
Cleaning Unit
5.
When cleaning, make sure the DPF is unplugged from the power
source. Do not use liquid cleaners or aerosol cleaners. Use a cloth
lightly dampened with water for cleaning the exterior of the
only .
DPF
2
C. Contents
1. 1 x 5” Digital Picture Frame w/Battery (CR2025)
2. 1 x AC to DC Adaptor
3. 2 x Interchangeable Frames (Black/White)
4. 1 x Instruction Manual
D. Positioning Your Frame
Pull out the stand to place the frame. Rotate the stand to position the
frame vertically or horizontally. Adjust the stand’s length to obtain the
desired vertical or horizontal viewing angle.
3
E. Unit View
Left and Right Side
Power On/Off Switch
DC 9V
Plug the AC adaptor
SD/MMC/MS Slot
Insert the SD/MMC/MS card
USB Slot
Insert a USB memory device
Note: The USB slot can not be connected to a PC for transferring
pictures from the PC to the DPF.
Front Side
4
Back Side
CR2025 backup
battery
Eyeholes for
wall mounting
Top Side
1) Brightness: Press to adjust the Brightness.
2) Play/Pause/Mode: Press to PLA Y/P AUSE or select an option.
3) Menu :Press to access the main menu or Card Selection menu.
4) Up/Copy/Delete: Press to navigate, copy or delete a photo.
5) Down/Rotate: Press to navigate or rotate a photo.
6) Prev . : Press to navigate or view the previous photo.
7) Next: Press to navigate or view the next photo.
5