Audiovox CADNAV1, CHRYNAV1, DMX5020, ESCNAV2, EXPNAV2 Owner's Manual

...

6.2" Double DIN Multimedia Receiver

Compatible with iPod / Pandora Link / USB / Aux In

DMX5020

Built-in Bluetooth / Compatible with iPhone /

Operating Instructions

4VRMS RCA Output

DMX5020

“Made for iPod” and “Made for iPhone” means that an electronic accessory has been designed to connect specically to iPod or iPhone, respectively, and has been certied by the developers to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety or regulatory standards. Please note that the use of this accessory with iPod or iPhone may aect wireless performance.

Android is a trademark of Google Inc.

The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Audiovox is under license. Other trademarks and trade names are those of their respective owners.

microSD is a trademark or registered trademark of SD-3C, LLC in the United States, other countries or both.

Pandora is a registered trademark of Pandora Media, Inc.

DMX5020

CONTENTS

FEATURES ............................................................................................................... 5

CONTROLS AND INDICATORS ...............................................................................8

REMOTE CONTROL ...............................................................................................10

EXTERNAL DEVICES ............................................................................................. 16

QUICK START GUIDE ............................................................................................18

EQUALIZER CONTROL MENU ..............................................................................21

SYSTEM SETTINGS ...............................................................................................23

RADIO TUNER OPERATION ..................................................................................31

USB AND SDHC OPERATION ...............................................................................36

iPod®/iPhone® OPERATION .................................................................................41

AV-IN OPERATION ................................................................................................46

BLUETOOTH OPERATION .....................................................................................47

STEERING WHEEL CONTROLS (SWC) OPERATION .............................................55

REAR CAMERA OPERATION .................................................................................57

PANDORA RADIO OPERATION ............................................................................58

CARE AND MAINTENANCE ..................................................................................64

SPECIFICATIONS ..................................................................................................65

NOTES ...................................................................................................................67

DMX5020

FCC Statement

1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation.

2. Changes or modications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit dierent from that to which

the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance of 20 centimeters between the radiator and your body.

DMX5020

Thank you for choosing a Jensen product. We hope you will nd the instructions in this owner’s manual clear and easy to follow. If you take a few minutes to look through it, you’ll learn how to use all the features of your new Jensen DMX5020 Media Receiver for maximum enjoyment. Please save this manual for future reference.

We recommend having your Jensen DMX5020 Media Receiver installed by a reputable installation shop.

FEATURES

MP3 / WMA

• ID3 Tag Compatible

• Directory Search (MP3 / WMA Only)

• Random, Repeat and Intro

• Play, Pause, Stop, Next Track and Previous Track

AM-FM

• USA, China, Japan, Europe, Europe (LW) and Orient (OIRT)

• 30 Station Presets (18 FM / 12 AM)

• Auto Stereo / Mono

• Local / Distance

• Auto Store / Preview Scan

iPod®/iPhone®

• iPod®/ iPhone® via USB

• High Speed Direct Connect Interface to Access iPod® Playlists, Artists, Albums

and Songs. Play music and view video/photo* les from your iPod®. *Video/photo playback requires jLink-USB iPod® interface cable (sold separately).

• Power Management Charges iPod® while Connected

Chassis

• 2.0 DIN (Import / ISO-DIN Mountable)

• Fixed Front Panel

• 6.2” High Denition TFT LCD

• 1,152,000 Sub Pixels (800 x 3 x 480)

• Beep Tone Conrmation (ON-OFF Option)

DMX5020

General

• Built-In Bluetooth® providing Hands-Free operation for safety and convenience and A2DP for streaming music from your smartphone or other Bluetooth® device.

• One Composite Video Output for Additional Screens

• Front Panel Audio/Video Input

• Ten-Band Tone Equalizer

• Rear Subwoofer Line Output

• Rear Camera Input

• Touch Screen Calibration Mode

• Rotary Encoder Audio Control

Rear Camera

The DMX5020 is “camera ready.” Before accessing any camera features, you must purchase and install a rear video camera.

DMX5020

WARNING! Never install this unit where operation and viewing could interfere

with safe driving conditions.

WARNING! To reduce the risk of a trac accident (except when using for rear

view video camera) never use the video display function while driving the vehicle. This is a violation of federal law.

WARNING! Never disassemble or adjust the unit.

WARNING! To prevent injury from shock or re, never expose this unit to moisture

or water.

WARNING! To prevent damage to the mechanism inside this unit, avoid impact to

the unit’s monitor.

WARNING! Using an improper fuse may cause damage to the unit and result in

re.

CONTROLS AND INDICATORS

DMX5020

OPEN

BAND

MUTE

DMX5020

AV INPUT

Bluetooth

DMX5020 Controls and Indicators

1. LCD Screen and Touch Screen:

Touch icons on this screen to access menus or control functions.

2. Remote Sensor:

Used to receive command signals from the remote control.

3. AV IN Connector:

This connector accepts a 3.5 mm jack through which signals from various audio/video devices can be applied to the unit.

4. MicroSD Card Slot:

Used to insert microSD cards containing music/video les (MP3, AAC, MPEG, etc.).

4VRMS Line Out

DMX5020

5. USB Slot:

Used to connect an iPod®, MP3 player or ash drive connection adapter for playback of music/video les.

6. Interface Cover:

Covers the AV IN connector, microSD card slot, and USB slot.

7. Reset Button:

Press this button to reset the system settings (except password and parental lock settings) and to correct a system halt or other illegal operation. Use the tip of a pen to press the Reset button.

8. Power On/O ( ) Button / Rotary Volume ( ) Knob / Mute Button

Press to turn the unit ON. Press and hold to turn the unit o. Rotate the knob to adjust the volume from 0 to 50. Press the knob momentarily to mute the audio. Press the knob again to restore the audio.

9. Menu Button:

Press this button to access the Main touch screen menu.

10. Band Button:

Press this button to select a preset fadio frequency band: FM1, FM2, FM3, AM1 or AM2.

DMX5020

Slide In

REMOTE CONTROL

Remote Control Notes

1. Aim the remote control at the remote sensor on the unit.

2. Remove the battery or insert a battery insulator if the remote control will not be used for a month or longer.

3. Do not store the remote control in direct sunlight or in a high temperature environment. It may not function properly.

4. Under normal operation conditions, battery life is approximately 6 months. If the remote control does not work, replace the battery.

5. Use button-shaped CR2025 lithium batteries only.

6. Do not recharge or disassemble the battery.

7. Do not heat the battery or expose the battery to re.

8. To avoid risk of accident, store the battery in a place that children can not reach.

Battery Installation/Removal

1. Slide out the battery compartment cover located on the bottom of the back

of the remote control.

2. Insert a CR2025 lithium battery into the battery tray. Make sure that the proper polarity (+ or -) is observed.

3. Align the cover tabs with the remote control and slide the cover in until it locks.

Slide Out

Battery Compartment Cover Removal/Installation

DMX5020

This page intentionally left blank

DMX5020

DMX5020 Remote Control

DMX5020

Remote Control Functional Description

1. SOURCE SRC Button: Press this button to switch between and select

available sources. (Radio, SDHC, USB/iPod®, Bluetooth®, AV-IN, Pandora)

2. POWER Button ( ): Press this button to turn the unit ON and OFF.

3. BLUETOOTH BT Button: Press this button to enter the Bluetooth

feature.

4. MAP Button: Not used.

5. PLAY / PAUSE   Button: Press this button to pause the playback of a le.

Press this button again to resume normal playback.

6. NEXT FORWARD uul) Button: Press this button to skip to the next track or

song Press this button while in Radio mode to search available radio station by increasing tuning frequency. Press this button while in iPod mode to pause playback/starts playback of a music le.

7. ANGLE Button ( ): Not used.

8. SUBTITLE Button ( ): Not used.

9. AUDIO Button: Not used.

10. VOLUME Button VOL + and : Press these buttons to increase or decrease

the playback volume.

11. SETUP Button: Press to this button to enter the system settings menu.

12. MUTE Button ( ): Press this button to turn the audio output ON and OFF.

13. GOTO Button: Press this button to open the direct entry search screen.

14. ANSWER INCOMING PHONE CALL Button ( ): Press this button to answer

an incoming Bluetooth phone call.

DMX5020

15. DISCONNECT ACTIVE PHONE CALL Button ( ): Press this button to disconnect an active Bluetooth phone call.

16. BACKSPACE Button ( ): Press this button to correct invalid number entries when entering passwords, track/chapter selections or phone numbers using the remote control.

17. RANDOM Button ( ): Press this button to play tracks in random order.

18. REPEAT Button   : Press this button to repeat the playback of a current track.

Allows the user to repeat a selected track of a MP3 device.

19. NUMBER Buttons (0-9): Press these buttons to directly access chapters and

tracks, dialing phone numbers, or entering passwords.

20. UP (p) / DOWN q) Buttons – Press these buttons to scroll upward and

downward, respectively, in menu options.

21. MENU Button: Press this button to access the root menu of a USB device or

microSD card during playback. The USB device or microSD card will return to normal playback and the root menu will disappear if no selection is made within 10 seconds. This button is also used to select photo mode of an MP3 player.

22. ENTER Button (OK): Press this button to implement a selected setting or

accept an option.

23. LEFT t / RIGHT u Buttons: – Press these buttons to shift left and right,

respectively, in the menu options

24. EQUALIZER Button (EQ): Press this button to accesses the equalizer menu in

all audio playback modes.

25. SCREEN BACKLIGHT ADJUST BUTTON  : Press this button to adjust the

screen backlighting level between low, medium and bright.

DMX5020

26. ZOOM Button ( ): (FOR VIEWING IMAGE FILES)

SD Card images -

Press ZOOM button SD Card Player Performs Once Enlarge the picture 100% of the original size 2 times Enlarge the picture 200% of the original size 3 times Enlarge the picture 300% of the original size 4 times Picture is returned to original size

27. BAND Button: Press this button to scroll though preset stations.

28. PREVIOUS ltt) Button – Press this button to go back to the previous

chapter, track or song during playback of a selection. Press this button while in Radio mode to search available radio station by increasing tuning frequency. Press this button while in iPod mode to pause playback/starts playback of a music le.

29. DISC Button: Not used.

30. TUNER: Press this button to enter Radio mode.

31. EJECT Button ( ): Not used.

32. HOME Button: Press this button to return to the source menu.

DMX5020

AV INPUT

Bluetooth

OPEN

EXTERNAL DEVICES

Connecting External Devices

External devices, including a game console, camcorder, navigation unit, iPod®, Zune®, etc. can be connected to this unit using its front A/V input 3.5mm jack (AV-IN).

You cannot directly control external devices connected to the A/V input using the front panel controls or this unit’s remote control.

AV-IN

AV-IN is used for playback of audio/video from an external device connected to the unit through a 3.5mm jack. The unit can increase or decrease the volume of the connected device all other controls are done on the connected device.

Select “AV-IN” mode to access auxiliary devices.

USB Cable (not included)

3.5mm A/V Cable (not included)

Connecting External Devices

Right Audio

Left Audio

Ground

Video

DMX5020

This page intentionally left blank

DMX5020

QUICK START GUIDE

Turning the Unit ON or OFF

Press the front panel Power On/O ( ) button / Rotary Volume ( ) knob / Mute button to turn the unit ON. To turn the unit OFF, press and hold the front panel Power On/O ( ) button / Rotary Volume ( ) knob / Mute button for 2 seconds.

Selecting an Audio/Video Source, Bluetooth, Steering Wheel Controls, Backup Camera or Pandora

To select an audio/video source:

1. Press the front panel MENU button or touch the SRC icon to view the main menu screen.

SRC

Icon

Button

DMX5020 Front Panel

2. Touch the desired source icon on one of the two main menu screens.

Screen 1 of 2: Radio, SDHC, USB, AV-IN, Settings, Bluetooth (BT), Steering Wheel Controls (SWC) or Camera. Touch Next at the bottom of the screen to access Screen 2 of 2: Pandora.

Screen 1 Screen 2

DMX5020 Main Menu Screen

DMX5020

System Settings Adjustment

To access and adjust system settings:

1. Touch the Settings ( MENU. Sub-menus where adjustments can be made will be highlighted. (See ”SYSTEM SETTINGS” on page 23.)

Volume Adjustment

To increase or decrease the volume level, rotate the front panel Power On/O ( ) button / Rotary Volume ( ) knob / Mute button. The unit’s front

panel screen will display the volume level for 3 seconds. The volume level ranges from 0 to 50 (a beep sounds, indicating that the adjustment limit has been reached).

Bluetooth volume can be adjusted independently of the radio volume by rotating the Power On/O ( Bluetooth must be in a call when making the volume adjustment. When exiting Bluetooth the volume will return to the previous source volume level.

Audible Beep Conrmation

An audible beep tone conrms each function selection. The beep tone can be disabled through the Setup menu.

) icon on the Main Menu screen to enter the SETTINGS

) button / Rotary Volume ( ) knob / Mute button.

Muting the Audio

Press the front panel Power On/O ( ) button / Rotary Volume ( ) knob / Mute button to mute the audio from the unit. Mute icon is displayed on the LCD screen. Press the Power On/O ( ) button / Rotary Volume ( ) knob / Mute button again to restore the audio volume to its previous level. Adjusting the volume or using any of the audio setup features cancels the mute function.

Equalizer Controls

Equalizer (EQ): Adjustment can be made after entering one of the audio/video sources (Radio, USB, AV-IN or SDHC).

Touch the Equalizer (EQ) icon to view the Equalizer Control Screen to select a desired preset setting (Optimal, Classic, Rock, Jazz, Techno or Pop), Flat setting, custom User setting, make adjustments to the audio Balance and Fade levels or to turn the Loudness option ON or OFF. Touch the SRC icon to return to the current source. (See ”Adjusting Equalizer Controls” on page 21.)

DMX5020

Resetting the System

Soft Reset - To correct a system halt or other illegal operation, use the tip of a pen to press and release the reset button located just below the front panel interface cover.

Reset

System Reset Button

For a Hard Reset- Touch the System Reset Icon on the Third Settings Screen.

After a system reset, the unit restores all factory default settings.

Parking Brake Inhibit

When the pink “Parking” wire is connected to the vehicle Parking Brake circuit, the front TFT monitor will display video when the Parking Brake is engaged.

DMX5020

EQUALIZER CONTROL MENU

Adjusting Equalizer Controls

The Equalizer adjustment screen allows the user to easily adjust the audio system to meet the acoustical characteristics of the vehicle. The acoustical characteristics vary depending on the type of vehicle and measurements. For example: proper setting of the audio controls can improve the speakers frequency response to compensate for cabin.

The Balance/Fade levels and Loudness ON/OFF option of a selected audio/ video source (Radio, SDHC, USB or AV-IN) is also adjusted through the Equalizer adjustment screen.

Equalizer (EQ) (10 Band)

1. Touch the Equalizer (EQ) icon to view and select a desired preset setting (Optimal, Classic, Rock, Jazz, Techno or Pop) or Flat setting.

NOTE: The equalizer will automatically change to “USER” when individual

audio functions are adjusted.

Equalizer Adjustment Screen

2. Select a desired frequency range slide bar to be adjusted (31.5, 62.5, 125, 250,

500, 1K, 2K, 4K, 8K or 16K).

3. Touch and move the slide bar Up or Down to adjust the frequency sound level

settings from -10 to +10.

User Setting

Touch the User icon to customize each of equalizers 10 frequency bands.

Flat Setting

Touch the Flat icon to set the equalizers 10 band frequencies to the midpoint.

+ 47 hidden pages