AUDIOVOX ELECTRONICS CORPORATION (the Company) warrants to the original retail purchaser of this product that should this product or any part thereof,
under normal use and conditions, be proven defective in material or workmanship within 12 months from the date of original purchase, such defect(s) will be
repaired or replaced with new or reconditioned product (at the Company’s option) without charge for parts and repair labor.
To obtain repair or replacement within the terms of this Warranty, the product is to be delivered with proof of warranty coverage (e.g., dated bill of sale),
specification of defect(s), transportation prepaid, to an approved warranty station or the Company at the address shown below. This Warranty does not extend
to the elimination of externally generated static or noise, to costs incurred for installation, removal, or reinstallation of the product, damage to speakers,
accessories, or vehicle and home electrical systems, or malfunction of satellite transmissions, repeater signal, or receiver unit.
This Warranty does not apply to any product or part thereof which, in the opinion of the Company, has suffered or been damaged through alteration, improper
installation, mishandling, misuse, neglect, accident, or by removal or defacement of the factory serial number/bar code label(s). THE EXTENT OF THE
COMPANY’S LIABILITY UNDER THIS WARRANTY IS LIMITED TO THE REPAIR OR REPLACEMENT PROVIDED ABOVE AND, IN NO EVENT, SHALL THE
COMPANY’S LIABILITY EXCEED THE PURCHASE PRICE PAID BY PURCHASER FOR THE PRODUCT.
This Warranty is in lieu of all other express warranties or liabilities. ANY IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, SHALL BE LIMITED TO THE DURATION OF THIS WRITTEN WARRANTY. ANY ACTION FOR BREACH OF ANY WARRANTY HEREUNDER INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY MUST BE BROUGHT WITHIN A PERIOD OF 48 MONTHS FROM DATE OF ORIGINAL PURCHASE.
IN NO CASE SHALL THE COMPANY BE LIABLE FOR ANY CONSEQUENTIAL OR INCIDENTAL DAMAGES FOR BREACH OF THIS OR ANY OTHER
WARRANTY, EXPRESS OR IMPLIED, WHATSOEVER. No person or representative is authorized to assume for the Company any liability other than expressed
herein in connection with the sale of this product.
Some states do not allow limitations on how long an implied warranty lasts or the exclusion or limitation of incidental or consequential damage so the above
limitations or exclusions may not apply to you. This Warranty gives you specific legal rights and you may also have other rights which vary from state to state.
U.S.A.: AUDIOVOX ELECTRONICS CORPORATION, 150 MARCUS BLVD., HAUPPAUGE, NEW YORK 11788, 1-800-645-4994
CANADA: CALL 1-800-645-4994 FOR LOCATION OF WARRANTY STATION SERVING YOUR AREA.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference,
and 2. This device must accept any interference received, including interference that may cause undesired operation.
IMPORTANT: THE FCC AND FAA HAVE NOT CERTIFIED THE XM CONNECT AND PLAY FOR USE IN ANY AIRCRAFT (NEITHER PORTABLE NOR PERMANENT INSTALLATION). THEREFORE, XM CANNOT SUPPORT THIS TYPE OF APPLICATION OR INSTALLATION.
Upon activation, you should be up and running. Your XM
Ready audio system’s user manual will provide the specifics on finding your way around the award-winning world of
XM and its up to 100 digital channels of audio entertainment. Now, sit back and experience radio as it was meant
to be!
Using XM Satellite Radio
For customer service, visit our XM Listener Care Center
online at https://activate.xmradio.ca/care/en/. There, you
can activate and deactivate radios, manage your account,
add premium services, make inquiries, and more.
Or, contact the XM Listener Care Center by calling 1-877GET-XMSR (1-877-438-9677), Monday through Saturday,
6:30 am – 12:00 am and Sunday, 8 am – 8 pm EST.
Contact XM Listener Care
Step 1: Setting Up Your XM Ready System Step 3: Activating Your Service
Step 2: Acquiring XM Signal
To activate via the Internet: Visit
https://activate.xmradio.ca/
To activate via phone: Call 1-877-GET-XMSR (1-877-438-9677).
A one-time activation fee will apply.
Printed on Recycled Paper © 2005 Audiovox Corporation. All rights reserved.
Warranty
Technical Information
Height: 29.2 mm (1.15 inches), Width: 77.0 mm (3.03 inches), Depth: 91.3 mm (3.60 inches), Weight: 10 oz (310 g), Power: 2.2 W
FCC Information
The XM Connect and Play is the only component you need
to get XM through your XM Ready audio system. With
power to your XM Ready audio system turned OFF, simply
connect the end of the antenna cable to the port on the
back panel of your XM Ready audio system labeled “XM.”
A one-time activation fee is required to establish an account and
activate service with XM Satellite Radio. Applicable activation
charges will be added to your first bill.
Turn on the power to your XM Ready audio system. Choose
XM as the input source per instructions in your XM Ready
audio system’s user manual. Tune to Channel 1, the XM
Preview Channel.
Move your antenna to various window locations around
your home to see where the best reception will be
received. Most XM customers place the antenna in a
south-facing window with a clear view to the sky. There are
two ways to confirm that you have strong signal reception:
Note: The optional CNP-HEXT Connect and Play extension cable
is available for installations requiring additional cable length.
Note: Carefully check your XM Satellite Radio ID.
The letters I, O, S, and F are not used.
Once you can hear the Channel 1 broadcast clearly and consistently,
you are ready to activate your service
1. Signal strength meter: Some XM Ready systems display
a signal strength meter for determining signal strength.
Refer to your XM Ready audio system’s user manual for
more information. Otherwise, use the Preview Channel
to determine if you are receiving the signal.
2. Hear XM Preview Channel: If you are tuned to Channel 1
and hear the audio, you are receiving satisfactory signal
strength to receive the XM service. If you do not hear
any audio, it means your antenna is not receiving an
adequate satellite or terrestrial repeater signal and must
be moved to a more appropriate location.
1. Before activating XM service, make sure your XM equipment is tuned to the XM Preview Channel (Channel 1).
2. Determine your eight-character XM Satellite Radio ID
number by referencing the label on your XM Connect and
Play packaging, rear cover, or by selecting channel 0. The
ID number will appear on the display. Write the number
here:
3. Activate your XM Satellite Radio service. Make sure you
have a major credit card and your XM Satellite Radio ID
number handy.
Getting Started: 3 Easy Steps!