Audiovox CA 5150 User Manual

PROFESSIONAL

SERIES

CA 5150

Owner ’s Guide

Remote Start and Keyless

Entry System

IMPORTANT NOTE: The operation of the Security and Convenience System as described in this manual is

applicable to most vehicles. However, due to the configuration of some vehicles, some functions AND/OR

SAFETY PRECAUTIONS may not apply . Please see your installing dealer for more information.

Table of Contents

Using Your Remote Control ...............................................................3

Using the Keyless Entry ................................................................... 3

Two Stage Door Unlock (optional) ...................................................3

Activating Trunk Release (optional) ................................................3

Using the Progressive Car Finder Feature......................................3

Using the Personal Protection Alarm ............................................... 3

Programmed Transmitter Notification ..............................................4

Valet Mode ........................................................................................4

Eliminating Lock / Unlock Notification Chirps ................................... 4

Using Your Remote Vehicle Starter ................................................. 4

Remote Starting Your Vehicle .......................................................... 4

Remote Start Shutdown ................................................................... 4

Entering Your Vehicle while it is Running via Remote Start ...........5

Preheating or Precooling the Vehicle’s Interior...............................5

User Programmable Run Time / Run Time Extension ...................... 5

Using the “Quick-Stop” Feature .......................................................5

Operating the 2 / 3 Hour Start Up Timer Mode ................................6

Operating the Daily Start Timer ........................................................ 6

Remote Start Safety Features .........................................................7

Transmitter Button Functions ...........................................................7

Replacing Remote Control Batteries ...............................................8

Warranty Information ...........................................................................9

Using Your Remote Control

Using the Keyless Entry

The button is used to lock the vehicle's doors, the button is used to unlock the vehicle's doors. To lock or unlock the doors simply press and release the desired function button one time. For your convenience, the parking lights will flash once when the doors are unlocked and twice when the door are locked.

NOTE: The system is defaulted with Silent Choice enabled, which requires a second press of the or button to activate an audible locking/unlocking response from the vehicle. If your system is set up for 2 step unlock, a third press of unlock will activate the audible response.

Two Stage Door Unlock (Optional)

If this feature is enabled on your system, pressing the button one time will unlock only the driver’s door. Press again within three seconds to unlock the remaining doors.

Activating the Trunk Release Feature (Optional)

The button is used to open the trunk of the vehicle. To open the vehicle's trunk press and hold the button for 3 seconds.

Activating AUX 1 (Optional)

If this feature is enabled on your system, pressing the and buttons simultaneously will activate an optional feature. This feature can be programmed for a wide range of functions like power window or sunroof automation, please consult your installing dealer to determine the functionality of your system.

Using the Progressive Car Finder Feature

Press the button to locate your vehicle. The system will sound 5 times at low volume, increasing in volume each time the button is pressed.

Using the Personal Protection Alarm (Panic)

Press and hold the button for 3 seconds to activate the personal protection alarm. During panic mode, the normal function of the transmitter buttons will be suspended. The transmitter’s and buttons can be used to lock and unlock the

door (if the option is installed). To stop the alarm, press and hold the button on the transmitter again for 3 seconds. The system will automatically stop after 30 seconds.

+ 7 hidden pages