Audiovox AWM910 User Manual
AWM910
Owner’s Manual
COMPACT DISC PLAYER
PUSH
1
AUX IN
2
RPT
PUSH PWR
VOL
MUTE
SCAN
5
H
ALARM
SET ON/OFF
EQ
BAND
SPK
B
6
M
T/F
AUD
CD
SPK
A+B
RADIO CD COMPACT MUSIC SYSTEM
JENSEN
AWM910
4
3
RDM
AUX
SPK
A
Thank You!
Thank you for choosing a Jensen product. We hope you will find the instructions in this owner’s
manual clear and easy to follow. If you take a few minutes to look through it, you’ll learn how to
use all the features of your new Jensen receiver for maximum enjoyment.
Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Wiring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Basic Operation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Tuner Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
CD Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
2
Features
Features of the Jensen AWM910 mobile audio system include:
• Auto Dimming LCD Display Backlighting
• Backlit Controls and Display
• Electronic AM/FM Tuner
• Three preset EQ Modes
• Rotary Volume Control
• Time/Alarm Clock
• Vertical CD Mechanism for Audio CD, CD-R, CD-RW
• 4-Channel Amplified Audio Output (50W Total)
• Front Aux Audio Input (3.5mm stereo jack)
• ¼" Headphone Output on Front Panel
AWM910
3
Installation
Select Mounting Location
Select a mounting location, taking care to avoid the following:
• Places exposed to heat-radiating appliances such as electric heaters
• Adjacent to other equipment that radiates heat
• Poorly-ventilated or dusty places
• Moist or humid locations
Preparing the Opening
Use the mounting hole diagram (below) to measure and cut a mounting hole, and mount the unit
using the four 3x20mm self-tapping screws provided.
Note: Before cutting the mounting hole, make sure the area behind the mounting location
is clear of wires and fuel, vacuum and or brake lines.
Mounting Hole Diagram
Mounting the Radio
Route power, speaker and antenna cables through the hole, and connect them to the unit as
outlined in the wiring diagram. After ensuring correct connections, test operation.
4
Loading...