Audiovox AVX10USB Installation And Operation Manual
AVX10USB
10.1 Inch
LCD Monitor WithBuilt In DVD Player
For Rear Seat Entertainment
Installation And Operation Manual
Congratulations
Warnings
Safety Precaution
Congratulations on your purchase of this Mobile Video Rear Seat Entertainment
System! The SBD61011 has been designed to provide passengers with unlimited
content options delivering smiles for many miles. Please read the directions that follow
to familiarize yourself with the product to ensure that you obtain the best results from
your equipment.
For safety reasons, when changing video media, it is recommended that the vehicle
is not in motion, and that you do not allow children to unfasten seat belts to change
video media or make any adjustments to the system. System adjustments can be
accomplished using the remote control, while seat belts remain fastened. Enjoy your
entertainment system but remember the safety of all passengers remains the number
one priority.
Do not use any solvents or cleaning materials when cleaning the video monitor.
Do not use any abrasive cleaners, they may scratch the screen.
Use only a lightly dampened lint free cloth to wipe the screen if it is dirty.
Before putting on headphones always adjust the volume setting to the lowest position.
Do not put pressure on the screen.
Caution children to avoid touching or scratching the screen, as it may become dirty or
damaged.
Table of Contents
Features .............................................................................................................5
Materials to use in this package ................................................................ 6
Docking bracket installation ...................................................................... 8
Wiring diagram ...............................................................................................7
Control and indicators diagram ................................................................ 9
Remote Control Operation .......................................................................11
Remote Control functions .........................................................................12
Source menu ..................................................................................................16
System Menu Setting and Adjustments ..............................................18
Playing DVDs and Audio Discs ................................................................24
Playing USB Devices ....................................................................................24
Playing MP3 Discs ........................................................................................25
DVD Basics ......................................................................................................26
Troubleshooting ...........................................................................................27
5
• 10.1” Digital Thin Film Transistor (TFT) Active Matrix Liquid Crystal Display
LED Backlit Monitor
• Built-in DVD Player
• Last position memory for DVD Player
• Six Audio / Video Source Inputs
DVD, USB, CARD, AV, AUX and HDMI.
• USB 2.0 Port (User Accessible with Media Playback)
• HD Input (User Accessible with MHL support)
• On Screen Display (OSD) for control of picture quality and functions
• Full function remote control
• Plays DVD, CD and MP3 discs
• 100 Channel Wireless FM Modulator
• Dual Channel IR Transmitter
• M1/M2 Operation (for when 2 systems are installed in 1 Vehicle so that IR
Headphone Audio and Remote Control operation is independent)
Features
Type
Resolution
Pixels
Operation Temperature
Storage Temperature
Backlit life
Video Display System
Video Output
Power Source
Dimension (L x W x H)
TFT Active Matrix LCD
1024 (RGB) (X3) x 600
1,843,200
32 ~ 113º F (0 ~ 45º C)
-4 ~ 149º F (-10 ~ 65º C)
20,000 Hours
NTSC / PAL / AUTO
1.0Vp-p @ 75 ohms
12VDC
255mm x 175mm x 42.5mm
10.0in x 6.9in x 1.7in
Specications
6
Materials To Use In This Package
1
56
78
2
34
1. AVX10USB system unit -(1PC)
2. MTB60001 docking bracket -(1PC)
3. Rubber pole adaptor x 7 pairs
Ø9.5mm,Ø11.5mm, Ø12.0mm, Ø12.2mm, Ø13.3mm, Ø13.95mm and Ø15.95mm
Note: This rubber pole adaptor is use to t the MTB60001 docking
bracket on the pillow pole.
4. Remote Control W/ Battery -(1PC)
5. 8P Din Power + AV out RCA cable harness -(1PC)
6. 8P Din M1 + M2 Connector harness -(1PC)
7. 8P Din + 8P Connector AV harness -(1PC)
8. 8P Din + 9P Connector Power harness -(1PC)
7
Docking Bracket Installation
1. Choose a correct rubber pole adaptor and put it on the pillow metal pole before
install the docking bracket.
2. Install the docking bracket to the pillow metal pole and tighten with the screw know
.
3. Plug in the harness cable on the monitor before dock on the docking bracket.
Harness wire need to install properly.
.
8
Wiring Diagram
NOTE:Please DO NOT use incorrect wrong cable harness on the monitor system
because user will
loos some function if install incorrectly.
For single monitor please use the 8P Din + AV Connector Harness( built
with AV input connector).
For Dual monitor please use the 8P Din M1 + M2 Connector Harness.
Master Monitor Satellite Monitor
Headrest Cable
Blue
8P Din + AV Connector Harness
Green
Green
Blue
Green
Ground
Headrest Cable
Blue
Headrest Cable
Green
Headrest Cable
Green
Video In Yellow
Audio In Left White
Audio In Right Red
Or
8P Din M1+M2 Connector Harness
DC 12V In
+12V(ACC)
Ground
DC 12V In
+12V(ACC)
9
Controls And Indicators Diagram
1
21
22
15
16
17
18
19
20
234568
14
7911 101213
1. Power Indicator
Red light indicator ( Bright = Standby Mode, Dim = Power On
2. Power/ Source ( )
To turn system On/ Off and to select the source.
3. Infrared Transmitter
To broadcast audio signal to IR headphone.
4. Left/ Next( )
Short press for Left cursor and level increase on System Menu pages.
Long press for next chapter, track during play the DVD
.
5. Up( )
Up cursor onSystem Menu pages and track selection during play the media file
.
6. Down( )
Down cursor on System Menu pages and track selection during play the media files.
7. Remote Sensor
To receive the signal from remote control.
8. Right/ Previous( )
Short press for Right cursor on System Menu pages and level decrease.
Long press for previous chapter, track during play the DVD.
9. Home/ Enter( )
Short press for Enterand.
Long press to call up or exit the Main Menu.
10. Infrared Transmitter
To broadcast audio signal to IR headphone.
10
Controls And Indicators Diagram(Continued)
11. Stop( )
Press once for pre-stop, press twice for totally stop the DVD/ Media information
.
12. Infrared Transmitter
To broadcast audio signal to IR headphone.
13. Play/ Pause( )
To start playback or pause the DVD/Media.
14. Open Knob
To open the DVD player cover to install or remove the disc.
15. HDMI Input
For connection of device with HDMI/ MHL output.
16. TF Card Input
For connection of TF Card memory device to playback media contents.
17. USB Input
For connection of USB memory device to playback media contents.
18. AUX Input
For connection of external audio and video device.
19. Earphone Jack
To produce audio signal output usingØ3.5mm plug wire headphone.
20. DC Input
To allow DC 12V supply in using Ø3.0mm DC plug input.
21. Power + AV Input
9 Pin harness cable with power and AV source input.
22. AV Output
8 Pin harness cable with AV source output.
Loading...