Audiovox AOM683 User Manual

AOM683

6.8” FLAT PANEL COLOR OBSERVATION MONITOR OWNER’S MANUAL

AOM683 Features:

– 6.8” High Performance Color LCD – Water Resistant Design – Built-in Audio Speaker with Volume Control and 12V Trigger

– 3 Camera (A/V) Input with Source Select Control

– Backlit Controls and Day/Night Picture Modes

for Nighttime Use – Auto/Manual Power On – Sun Visor Included

Visit us at http://www.asaelectronics.com

Patent Pending

PPLICATIONS, L.L.C.UDIOVOX PECIALIZED

Important! – Please Read This Manual Before Installing!

Congratulations on your purchase of a Voyager AOM683 LCD Observation Monitor. With proper installation and use, your AOM683 is designed to provide you with years of trouble-free operation. This manual contains important information required to properly install and operate the unit. Please read this manual thoroughly before beginning.

All Voyager Observation products are strictly intended to be installed as a supplement aid to standard rear-view mirror systems that may already exist in your vehicle. Voyager observation products are not intended for use as substitutes for rear-view mirror devices, or for any other standard motor vehicle equipment required to be installed on vehicles by law.

While Voyager observation products contribute to improving the vehicle operator’s field of view, these products are no substitute for proper defensive driving techniques and observance of traffic laws and motor vehicle safety regulations.

Warnings!

Installation Location

It is unlawful in most jurisdictions for a person to drive a motor vehicle equipped with a television viewer or screen located at any point forward of the back of the driver’s seat or in any location that is visible, directly or indirectly, to the driver while operating the vehicle. The AOM683 product is designed to be used primarily as a rear observation device in conjunction with closed circuit cameras. In any installations where the AOM683 is used to display television broadcasts or recorded video playback, installation

location must adhere to local laws and regulations.

Tampering

To prevent electrical shock, DO NOT OPEN THE MONITOR CASE. There are potentially harmful voltages inside the monitor. There are no user serviceable parts inside. If evidence of tampering is detected, the warranty will be considered void.

Moisture

Your Voyager AOM683 was designed to be water-resistant. While it will withstand short periods of exposure to moisture, this product does contain sensitive electronic components and exposure to moisture should be limited by the user / installer. This product is not designed for applications where constant exposure to moisture or immersion can be encountered. This unit should NEVER be cleaned with a power washer or used where direct power washer spray may be encountered.

90 DAY/ 12 MONTH LIMITED WARRANTY

Audiovox Specialized Aplications, LLC (the company) warrants to the original retail purchaser of

this product that should this product or any part thereof, under normal use and conditions, be proven defective in material or workmanship within 90 days from the date of purchase, such

defect(s) will be repaired or replaced (at the company's option) without charge for parts and labor

repair. After the initial 90 day period and for a period of 12 months from the date of original

purchase, the company will supply at no charge a replacement for any defective part(s) but will

charge for the labor to repair the product. To obtain repair or replacement within the terms of this Warranty, AS A must be called and a return authorization must be given to reference the product when returned. The product is to be delivered with proof of waranty coverage (e.g. dated bill of sale), specification of the defect(s), transportation

prepaid, and Return Authorization Number clearly written on the outside of the package. The

product must be returned to ASA for repair unless specified otherwise by ASA. This warranty does not cover the elimination of externally generated static or noise, to the correction of antenna problems, to costs incurred for removal or reinstallation of the product, or damage to any

tapes, speakers, accessories, or electrical systems. This warranty does not apply to any product or part thereof which in the opinion of the company has been damaged through alteration, improper installation, mishandling, misuse, neglect or accident. THE EXTENT OF THE COMPANY'S LIABILITY UNDER THI S WARRANTY IS LIMITED TO THE REPAIR OR REPLACEMENT PROVIDED ABOVE AND, IN NO EVENT SHALL THE COMPANY'S LIABILITY EXCEED THE PURCHASE PRICE PAID BY THE PURCHASER FOR THE PRODUCT. This warranty is in lieu of all other express warranties or liabil ities, ANY IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, SHALL BE LIMITED TO THE

DURATION OF THIS WARRANTY. ANY ACTION OR ANY BREACH OF ANY WARRANTY HEREUNDER INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY MUST BE

BROUGHT WITHIN A PERIOD OF 30 DAYS FROM THE DATE OF PURCHASE. IN NO CASE SHALL THE COMPANY BE LIABLE FOR ANY CONSEQUENTIAL OR INCIDENTAL DAMAGES OR BREACH OF THIS OR ANY OTHER WARRANTY, EXPRESS OR IMPLIED, WHATSOEVER. NO person or representative is authorized to assume for the Company an y other than expressed herein connection of the sale of this product. Some states do not allow limitations on how long an

implied warranty lasts or the exclusion of incidental or consequential damages so the above

limitations or exclusions may not apply to you. This gives you spec ific legal rights and you may also

have other rights which vary from state to state.

Audiovox Specialized Applications, LLC

PACKING CONTENTS:

WARRANTY CARD

QTY. 1

LCD MONITOR

TY. 1

5’ INTERMEDIATE HARNESS

QTY. 1

POWER HARNESS QTY. 1

1 • 1 •

2 • 2 •

3 • 3 •

4 • 4 •

D N G

•

• •

• • •

) V

1 +

( R

)

( C C

E S

)

(

) V

1 E

( Y

I T

R S

)

(

SUN SHIELD

QTY. 1

4” X 2” VELCRO

QTY. 1

#8 X ¾” SELF DRILL BLACK SCREWS (HARDWARE

BAG)

QTY.4

#10 X 5/16” PHP THREAD FORMING BLACK

SCREW (HARDWARE BAG) QTY. 4

LCD

POWER IN

A/V 1 A/V 2

PANEL

/V 3

SPLIT GROMMET

1” O.D. 3/16 I.D.

QTY. 1

STOP

DISTANCE MARKER

STICKER

QTY.1

A/V INPUT JUNCTION BOX

QTY.1

4” BLACK WIRE TIE

QTY. 4

CONTROLS AND OPERATION

2 3

4 5

–

1. Power/Stand-By Button

The AOM683 has two possible operation modes for turning the unit on/off. In manual mode, the power button is used to turn the unit on/off. In stand-by mode, the unit automatically turns on only when 12V is applied to the stand-by trigger wire.

For MANUAL operation, the AOM683 should be wired as follows:

The ACC (+12V) lead (red) should be wired to the ACC feed of the vehicle (switched +12V).

*Please note that if the unit is in “Stand-by On” mode, the Power Button will appear to have no effect (it will switch from “on” to “on” in this case).

For STAND-BY operation, the AOM683 should be wired as follows: The ACC (+12V) lead (red) should be wired to the ACC feed of the vehicle (switched +12V). The stand-by reverse, left, right trigger should be wired to the ACC feed of the vehicle (+12V when the vehicle is in reverse or left signal or right signal). The unit will automatically turn ON whenever the stand-by trigger is +12V with below condition:

– when Stand-By Reverse trigger is +12v, unit will active AV1

display image on screen.

– when Stand-By Left trigger is +12V, unit will active AV2

display image on screen.

– When Stand-By Right trigger is +12V, unit will active AV3

display image on screen.

–

* Note : The unit will not be turn ON during the harzard condition and the three stand-by trigger is in +12V at the same time.

+ 9 hidden pages