Audiovox AN-125 User Manual

I~

Installation Instructions:
Clean the inside of the window with the
supplied towelette. Allow window to dry. Peel
off thd adhesive and mount the antenna on the
inside of the window in a horizontal position.
Antenna performance will be improved If the

groud lug is secured to the chassis of the
vehicle as physically close to the antenna as is
practical. Do not mount the antenna to windows
with metalized tint. Mount the antenna as high

up in the window as practical.

Wiring Instructions:

Insert the radio plug into the radio's antenna
input. The short wire near the antenna plug
must be connected to a + 12 volt DC switched
ignition circuit. The red LED will be lit if the
antenna is powered up and operating properly
The antenna will not operate if the LED is not
illuminated.

Power L.E.D.

CF==-:ed Color

Groud Terminal

/

.::..,)

+ 12 volt DC power
Black Color

Radio Antenna Plug

~

Rev. B 8112/96