Audiovox ADV200B User Manual

ADV200B / ADV200S /

ADV200P

DVD PLA YER

PICTURE

SOURCE VOLUMEFMSELECT

SELECT

O I D U A

T U P N I

O E D I V

R I

ON OFF AUTO

WITH

H E A D P H O N E S

DROP-DOWN

VIDEO

MONITOR

128-7252A

1 of 35

Important Notice

An LCD panel and/or video monitor may be installed in a motor vehicle and visible to the driver if the LCD panel or video monitor is used for vehicle information, system control, rear or side observation or navigation. If the LCD panel or video monitor is used for television reception, video or DVD play, the LCD panel or video monitor must be installed so that these features will only function when the vehicle is in “park” or when the vehicle’s parking brake is applied.

An LCD panel or video monitor used for television reception, video or DVD play that operates when the vehicle is in gear or when the parking brake is not applied must be installed to the rear of the driver’s seat where it will not be visible, directly or indirectly, to the

operator of the motor vehicle.

Warnings

Do not use any solvents or cleaning materials when cleaning the video monitor. Do not use any abrasive cleaners, they may scratch the screen. Use only a lightly dampened lint free cloth to wipe the screen if it is dirty. Lock the LCD screen in the fully closed position when not in use. Before putting on headphones always adjust the volume setting to the lowest position. Remember to leave the dome light switch in the off or auto positions when the vehicle is unattended, as the dome lights, if left on, can drain the vehicle’s battery. Do not put pressure on the screen. Caution children to avoid touching or scratching the screen, as it may become dirty or damaged.

Television Reception

This entertainment system is designed primarily for viewing prerecorded movies or playing video games. Television reception in a moving vehicle will be limited and in some areas will not be possible due to weak and variable signal strength. Television viewing in a stationary vehicle will result in an improvement, but may still be marginal due to signal strength. The quality of the picture will not be consistent with home TV reception. Reception may be affected by weather and distance from TV station. A weak signal may cause the picture to roll, be

snowy, or cause some color loss.

Licensed under one or more of the following patents, Patent NOS. 5,775,762 and 5,927,784

-2-

128-7252A

2 of 35

Congratulations on your purchase of the ADVENT ADV200 DVD Player with Drop-Down Video /Monitor. The ADV200 has been designed to give you and your family many years of video entertainment in the mobile environment. Please read the directions that follow to familiarize yourself with the product and to ensure that you obtain the best results from your equipment. Please note: Installation options vary , see the individual owner’s manuals for each component in your system to obtain a full

understanding of each component’s operation.

Safety Precaution

For safety reasons, when changing video media it is recommended that the vehicle is not in motion, and that you do not allow children to unfasten seat-belts to change video media or make any adjustments to the system. System adjustments can be accomplished using the remote control, while seatbelts remain fastened. Enjoy your Audiovox entertainment system but remember the safety of all passengers remains the

number one priority.

Features

••

• 8.5 Inch TFT (Thin Film Transistor) Active Matrix

••

LCD (Liquid Crystal Display) Monitor

••

• OSD (On Screen Display) for Control of Picture

••

Quality and Functions

••

• Optional TV Tuner*

••

• Full Function Remote Control

••

• Infrared Transmitter for IR Wireless Headphones.

••

• T wo Audio / Video Inputs (A V1/AUX)

••

• Built-in DVD Player

••

• Two Headphone Jacks

••

• Built-in Five Frequency Wireless FM Modulator

••

(**Optional Relay Box)

••

• Forward and Side Remote Sensor

••

• Dome Lights with 3-Position Switch

••

• Backlit Controls for Low Light Operation

••

• Last Position Memory for DVD

••

Options * Audiovox P/N PODTVT

** Audiovox P/N SIRSWB

-3-

128-7252A

3 of 35

Controls and Indicators Diagram



 



!

" #

$

POWER

EJECT

PLAY

STOP

" #



PICTURE

SOURCE

SELECT

ON OFF AUTO

VOLUMEFMSELECT



'

H E A

R O I D U A

T U

P N

O E D I V

D P H O N E S

&

%

-4-

128-7252A

4 of 35

Control Function Descriptions

1. DVD Disc insertion slot – For loading Disc.

2. POWER Button – Used to turn the system ON/OFF . Bright

red when system is on, dim when off.

3. EJECT ( ) Button – For ejecting discs from the disc compartment.

4. PLA Y ( ) Button – This button is used to start playback of a disc.

5. STOP ( ) Button – To stop playback.

6. Infrared Transmitter and Sensor – Use to transmit audio

to the wireless headphones. Also allows the remote control to operate the ADV200 and to control other accessories in the system.

7. ADV200 V entilation Opening.

8. Dome Lights – Provide additional interior illumination.

9. SOURCE Select – Used to select one of the three sources

(DVD, A V1, AUX, *TV Optional).

10. ( + ) Button – Used to increase levels in the picture adjust mode.

12. ( – ) Button – Used to decrease levels in the picture adjustment mode.

13. Auxiliary Audio Right Input.

14. Auxiliary Audio Left Input.

15. Auxiliary Video Input.

16. Side Remote Sensor Eye – Allows the remote control to

operate the ADV200, control volume to the wired headphone jacks and control the other accessories.

17. Drop Down LCD Panel.

18. Headphone Jacks – Allow the use of wired headphones

with a 1/8” plug for listening to the video program audio.

19. Screen release – Moves in direction of the arrow to release the drop down screen.

20. VOLUME ( ) Button – Use this button to raise the volume level of the headphone jacks.

* Consult the PODTVT Installation/Owner’s Manual for optional

TV tuner instructions.

11. PICTURE SELECT Button – Allows the user enter the picture adjustment mode.

-5-

128-7252A

5 of 35

21. FM Select Button – When this button is pressed it will turn on the wireless FM Modulator and then cycle through FM frequencies (Channel 1, 88.3MHz; Channel 2, 88.7MHz; Channel 3, 89.1MHz; Channel 4, 89.5MHz; Channel 5,

89.9MHz and OFF).

22. VOLUME ( ) Button – Use this button to decrease the volume level of the headphone jacks.

Note:These buttons will not affect the volume of wireless

headphones or the wireless FM modulator. When using these devices the volume must be adjusted with the wireless headphone volume control or with your radio’s volume control (see page 16, Wireless Headphones, or page 17, Wireless FM Modulator).

23. Three position Dome Light Switch

• Auto – Automatically switches on the dome lights in conjunction with the vehicle’s interior illumination.

• Off – The dome lights will not turn on in this position.

• On – Turns on the dome lights.

Note : Audiovox recommends the use of the Audiovox HP 275

Headphones when using wired headphones.

-6-

128-7252A

6 of 35

Remote Control Operation

BATTERY COVER

Battery Installation

Before attempting to operate your Remote Control, install the batteries as described below .

1) Turn the Remote Control face down. Using a fingernail,

lift the battery cover off.

2) Install two “AAA” batteries as shown. Make sure that

proper polarity (+ or -) is observed.

3) Align the cover tabs with the remote control and press

down until the cover clicks. The remote control will operate the ADV200 and most Audiovox VCP’s. It is not a universal remote control and will not control equipment from other manufacturers.

-7-

1 2

3 4 5

6 7

9 10 11

12 13 14 15 16 17 18 19 20 21

146) 146*

42 41 40

39 38

37 36

35 34 33 32 31 30 29 28 27 26 25 24

23 22

128-7252A

7 of 35

Remote Control Function Descriptions

*Function control is available on the unit and the remote control.

** Not used in this model *** The TV Option will only be displayed and the TV control functions are only available if the optional TV Tuner (P/N PODTVT) is installed.

1. POWER Button*

Press this button to turn the ADV200 on. Press the button again to turn the ADV200 off.

2. SOURCE Button*

Each time the button is pressed, the audio / video source will change: DVD, A V1, AUX and TV***.

3. AUTO MEMORY Button (AUTO PROGRAM Button)***

When the AUTO MEMORY button is pressed, all channels are searched and channels that are detected with signals of sufficent levels are automatically stored.

4. SKIP/SEARCH Button***

This button selects betweeen SKIP and SEARCH mode. In “SKIP mode” the TV tuner will tune and stop on channels that are programmed into memory when CHANNEL UP/DOWN buttons are used. When the SKIP mode is disabled, the TV will stop on all active channels.

5. ERASE/WRITE Button***

While tuned to a channel, pressing this button will store or erase the channel from memory . The stored channel numbers are displayed in “GREEN” and the erased channel numbers are displayed in “RED”.

6. Channel Up ( ) Button

Use this button to increase the channel number*** to the desired channel and to scroll upward in menu options.

-8-

128-7252A

8 of 35

7. MUTE Button

Press this button to mute the audio. Pressing the button again restores the sound to the previously set level.

8. ENTER Button

Used to implement a selected setting or menu option.

9. LEFT ( ) Button

Allows the user to shift left in the menu options.

10. MENU Button

Allows the user to access the main menu.

11 . RETURN Button**

12. TV Mode Select Button***

Switches certain function keys on the remote control for TV functions.

13. DVD Mode Select button

Switches certain function keys on the remote control for DVD functions.

-9-

128-7252A

9 of 35

14. DISPLAY Button

Press to display DVD Disc current information. Press DISPLA Y button DVD Player Perform Once Display current TITLE , CHAPTER & elapsed time

Twice Display current SUBTITLE 3 times Display current AUDIO language & channel

4 times Display current surround mode

5 times Display current ANGLE 6 times Display A-B current status 7 times Display REPEAT current status 8 times Display off

For Subtitle, Audio, Surround, Angle, A - B & Repeat, press Enter key repeatedly to change the options. These options may vary from disc to disc.

15. FM TRANSMITTER ON/OFF Button

Turns FM Modulator power on/off.

16. AUDIO Button

Press this button to display and select the desired AUDIO language. Each time the button is pressed, the language or track changes.

NOTE: The languages & tracks you can select are vary from disc to disc.

-10-

128-7252A

10 of 35

17. ZOOM Button – Press this button to zoom the picture Press ZOOM button OSD DVD Player Perform Once 1 X ZOOM picture 2 times

Twice 2 X ZOOM picture 3 times 3 times 3 X ZOOM picture 4 times 4 times 1/2 Reduces picture to 1/2 normal size

5 times 1/3 Reduces picture to 1/3 normal size 6 times 1/4 Reduces picture to 1/4 normal size 7 times OFF Returns to normal size

18. P AUSE ( ) Button

Allows the user to pause the playback.

19. STOP (n) Button*

Disc playback will be stopped.

20. PREVIOUS ( ) Button

Allows the user to return to the previous chapter or track.

21. NEXT ( ) Button

Allows the user to skip to the next chapter or track.

22. REV ( ) Button

Allows the user to search in a backward direction at 2, 4, 8, 16 and 32 times the normal speed.

-11-

128-7252A

11 of 35

+ 24 hidden pages