Audiovox ACD-32A User Manual

WNER'S MANUWNER'S MANU

WNER'S MANU

WNER'S MANUWNER'S MANU

ALAL

AND INSTAND INST

AND INST

AND INSTAND INST

ACD-32AACD-32A

ACD-32A

ACD-32AACD-32A

DETACHABLEFRONTPANEL

ALLAALLA

ALLA

ALLAALLA

TION GUIDETION GUIDE

TION GUIDE

TION GUIDETION GUIDE

ACD-32A

ELECTRONICALL Y-TUNEDAM/FM/MPXRADIO

Released 1-28-98. (Output Power was 50 watts).

WITHCOMPACTDISCPLA YER

ANDQUARTZCLOCK

128-5272 1of20

INDEXINDEX

INDEX

INDEXINDEX

How To Use This Manual .......................................................................

Kit Information ........................................................................................

Universal and Import Car Installations ...................................................

Chrysler-Dodge-Plymouth Installations ..................................................

Chevrolet-Oldsmobile-Pontiac-Buick-GMC Cadillac-Saturn

Installations ............................................................................

Ford-Lincoln-Mercury Installations .........................................................

Radio Wiring ...........................................................................................

Speaker Wiring:2or4-Speaker Systems without external amplifier ....

4-Speaker Systems with external amplifier ...............

Operating Instructions ............................................................................

Setting the Clock ....................................................................................

Error Codes ............................................................................................

Specifications .........................................................................................

Frequency Step Switch ...........................................................................

Troubleshooting ......................................................................................

Care and Maintenance ...........................................................................

Warranty .................................................................................................

Toll-Free AssistanceToll-Free Assistance

Toll-Free Assistance

Toll-Free AssistanceToll-Free Assistance

The installation and wiring connections for this unit are so simple, we doubt you'll need our help, but, if you do, we're here to help you. Just call our toll-free telephone assistance line at (800) 645-7102 during days/hours shown.

Page 1 Page 2 Page 3,4 Page 5

Page 6 Page 7 Page 8 Page 9 Page 10 Page 11-15 Page 15 Page 15 Page 16 Page 16 Page 17 Page 18 Back Page

TIME ZONE

DAY

MON.-FRI.

SATURDAY

PACIFIC

5:30AM - 4PM

6AM - 2PM

MOUNTAIN

6:30AM - 5PM

7AM - 3PM

CENTRAL

7:30AM -6PM

8AM -4PM

EASTERN

8:30AM - 7PM

9AM - 5PM

HELP!

1-800-645-7102

Monday- Friday Saturday

HOW TO USE THIS MANUALHOW TO USE THIS MANUAL

HOW TO USE THIS MANUAL

HOW TO USE THIS MANUALHOW TO USE THIS MANUAL

1. Identify the make and year of the car in which you will be installing this sound system.

2. Refer to the Kit Listing and Kit Information sections on page 2 to determine if a kit is required.

3. If a kit is required, follow the directions in Kit Information section.

4. Follow the specific installation instructions for your particular make of car as listed in the

index.

8:30am-7:00pmEastern 9:00am-5:00pm Eastern

128-5272 2of20

KIT INFORMATIONKIT INFORMATION

KIT INFORMATION

KIT INFORMATIONKIT INFORMATION

1. The years shown in the Kit Listing below are approximate. Always check the application chart at your retail store to find information on your specific make, model and year of vehicle. If a kit is required, read the description on the kit you intend to purchase to make sure it applies to your vehicle. If you have any doubts or questions, call our toll-free "HELP" line.

2. The kits shown below are Audiovox kits. Your retailer may sell kits made by other manufacturers which may also be usable to install this radio. Always check the kit application before purchasing it to make sure it will work with your vehicle.

3. If you believe you need a kit but cannot find a retail store where it is available, call our toll-free "HELP" line.

KIT LISTINGKIT LISTING

KIT LISTING

KIT LISTINGKIT LISTING

VEHICLE TYPE

Chevrolet-Oldsmobile-Buick-Pontiac-Cadillac-Saturn

1981 and Older ............................................................

1982 and Newer ...........................................................

Chevrolet-GMC Full Size Vans

1988 and Newer ............................................................

Chevrolet-GMC Full Size Pickups

1988 and Newer ............................................................

Chrysler-Dodge-Plymouth

U.S. Built 1974 and Newer ............................................

Imported .......................................................................

KIT REQUIREMENT/NOTES

Installation Not Possible AX-93-FCGM

AX-88-CHV

AX-88-CHT

AX-93-FCGM Refer to In-Store Chart

Ford-Lincoln-Mercury

1984 and Older .............................................................

1985 and Newer ............................................................

Jeep-Eagle

1984 and Newer ............................................................

IMPORT CARSIMPORT CARS

IMPORT CARS

IMPORT CARSIMPORT CARS

Due to the wide variety of import cars and the different installations required, this manual does not show typical installations in these vehicles. However, this sound system can be installed in many import cars by following the "Universal Installation" section on pages 3 and 4. Check the application chart at your retail store or call our toll-free "HELP" line for specific information on your particular car.

IMPORTS:

Acura-Audi-BMW-Daihatsu-Fiat-Honda-Hyundai Mercedes-Peugeot-Porsche-Saab-Subaru

Volkswagen-Volvo-Yugo ..............................................

Datsun-Nissan ..............................................................

Mazda ..........................................................................

Toyota ..........................................................................

For vehicles not listed or more specific information, refer to the in-store application chart or call our "HELP" line.

Will Fit Most Years; Some Require Filing of Dash Refer to In-Store Chart Professional Installation Recommended Professional Installation Recommended

Installation Not Possible AX-93-FCGM

Filing of Dash Required

128-5272 3of20

UNIVERSAL INSTALLATION AND IMPORT CAR INSTALLATIONUNIVERSAL INSTALLATION AND IMPORT CAR INSTALLATION

UNIVERSAL INSTALLATION AND IMPORT CAR INSTALLATION

UNIVERSAL INSTALLATION AND IMPORT CAR INSTALLATIONUNIVERSAL INSTALLATION AND IMPORT CAR INSTALLATION

This installation is designed for cars, trucks, vans, and boats that have an existing radio opening that is no larger than the size shown on the template provided (182mm wide x 53mm high). If the opening is smaller than required, you can use a file to enlarge it to match the template, using the slots on the template as a guide. If you have no existing radio opening, use the template to accurately cut the required size as per the slots on the template.

CAUTION: 1. DO NOT CUT OR FILE THE OPENING TO THE OUTER EDGES OF THE TEMPLATE!

2. FOR PROPER OPERATION OF THE CD PLAYER, THE CHASSIS MUST BE WITHIN 20° OF HORIZONTAL. MAKE SURE THE UNIT IS MOUNTED WITHIN THIS LIMITATION.

1. Inspect the Existing Radio Opening:

A. Use the radio opening template (supplied) to make sure the dashboard opening is the proper size.

If your vehicle does not have an existing opening of this size, it will be necessary to cut or file the opening to these dimensions.

B. Check that there will be sufficient space behind the dashboard for the radio chassis.

2. Prepare theRadio for installation:

A. Carefully check the radio chassis for any shipping screws that are labeled "Remove Before

Installation" and remove them as necessary.

B. Remove the detachable front panel if it is attached to the chassis, as explained in the Operating

Instructions section of this manual.

C. Using the 2 removal tools (supplied), remove the mounting sleeve from the radio chassis as shown

in the diagram below.

3. Mounting the Radio Sleeve:

A. Check the dashboard opening size by sliding the mounting sleeve into it. If the opening is not large

enough, carefully cut or file as necessary until the sleeve easily slides into the opening. Do not force the sleeve into the opening or cause it to bend or bow.

B. Locate the series of bend tabs along the top, bottom, and sides of the mounting sleeve. With the

sleeve fully inserted in the dashboard opening, bend as many of the tabs outward as necessary so that the sleeve is firmly secured to the dashboard.

UNIVERSAL INSTALLATION AND IMPORT CAR INSTALLATIONUNIVERSAL INSTALLATION AND IMPORT CAR INSTALLATION

UNIVERSAL INSTALLATION AND IMPORT CAR INSTALLATION

MOUNTINGSLEEVE

MOUNTINGANGLELIMITATION

SIDEVIEW

CHASSIS

20°

MAX.

FRONT PANEL

MAX.

USETEMPLATETOCHECKOPENINGSIZE ORTO CUTOPENING INSOLID DASHBOARDS

HELP!

1-800-645-7102

Monday- Friday Saturday

RADIO

20°

8:30am-7:00pmEastern 9:00am-5:00pm Eastern

REMOVALTOOLS

REMOVABLEFRONTPANEL (REFERTOOPERATING INSTRUCTIONSFORREMOVAL)

128-5272 4of20

UNIVERSAL INSTALLATION AND IMPORT CAR INSTALLATIONUNIVERSAL INSTALLATION AND IMPORT CAR INSTALLATION

UNIVERSAL INSTALLATION AND IMPORT CAR INSTALLATION

UNIVERSAL INSTALLATION AND IMPORT CAR INSTALLATIONUNIVERSAL INSTALLATION AND IMPORT CAR INSTALLATION

4. Wire the Radio to the Vehicle's Wiring:

A. Place radio in front of dashboard opening so that wiring can be brought through the mounting sleeve. B. Carefully follow the diagrams on pages 8 and 9 or 10 to wire the radio, making certain all connections

are secure and insulated with wire nuts or electrical tape to insure proper operation of the unit.

C. After completing the wiring, re-attach the front panel to the chassis and turn the unit on to confirm

operation (ignition switch must be "on"). If unit does not operate, re-check all wiring until problem is corrected.

D. Once proper operation is achieved, turn off ignition switch, remove front panel, and proceed with

final mounting of the radio.

5. Installing the Radio in the Mounting Sleeve:5. Installing the Radio in the Mounting Sleeve:

5. Installing the Radio in the Mounting Sleeve:

5. Installing the Radio in the Mounting Sleeve:5. Installing the Radio in the Mounting Sleeve:

A. Carefully slide the radio into the mounting sleeve until it is fully seated and the side spring clips snap

in place.

B. Attach one end of the perforated strap (supplied) to the screw stud on the rear of the radio using

the hex nut provided.

C. Fasten the other end of the perforated strap to a secure part of the dashboard either above or below

the radio using the screw and hex nut provided.

CAUTION: The rear of the radio must be supported with the strap to prevent possible damage to the

dashboard from the weight of the radio or improper operation of the radio due to vibration.

D. Re-attach the front panel to the chassis and check operation of the unit by referring to the Operating

Instructions section of this manual.

6. Removing the Radio:

A. Should it be necessary to remove the radio for servicing or other reasons, first remove the

detachable front panel.

B. Remove the rear support strap by taking off the hex nut securing it to the screw stud on the rear

of the chassis.

C. Use the 2 removal tools (supplied) to disengage the spring clips and pull the radio out of the mounting

sleeve.

UNIVERSAL INSTALLATION AND IMPORT CAR INSTALLATION

UNIVERSAL INSTALLATION AND IMPORT CAR INSTALLATIONUNIVERSAL INSTALLATION AND IMPORT CAR INSTALLATION

HEXNUT

PERFORATEDSTRAP

HEXNUT

BENDTABSTOSECURE SLEEVETODASH

SLIDERADIOINTOSLEEVE

SCREWSTUD

BENDTOP TABSUPWARD

BENDBOTTOM

TABSDOWNWARD

128-5272 5of20

CHRYSLER-DODGE-PLYMOUTH INSTALLATIONCHRYSLER-DODGE-PLYMOUTH INSTALLATION

CHRYSLER-DODGE-PLYMOUTH INSTALLATION

CHRYSLER-DODGE-PLYMOUTH INSTALLATIONCHRYSLER-DODGE-PLYMOUTH INSTALLATION All U.S. Made Cars, Trucks, and Vans Built Since 1974All U.S. Made Cars, Trucks, and Vans Built Since 1974

All U.S. Made Cars, Trucks, and Vans Built Since 1974

All U.S. Made Cars, Trucks, and Vans Built Since 1974All U.S. Made Cars, Trucks, and Vans Built Since 1974

Important-This radio cannot be installed in any U.S. made Chrysler, Dodge, or Plymouth without an installation kit. Refer to Kit Listings on page 2 for the required kit. Complete kit installation is explained in the instructions included with the kit.

CAUTION: 1. DO NOT CUT OR FILE THE OPENING TO THE OUTER EDGES OF THE TEMPLATE!

2. FOR PROPER OPERATION OF THE CD PLAYER, THE CHASSIS MUST BE WITHIN 20° OF HORIZONTAL. MAKE SURE THE UNIT IS MOUNTED WITHIN THIS LIMITATION.

1. Remove Existing Radio:1. Remove Existing Radio:

1. Remove Existing Radio:

1. Remove Existing Radio:1. Remove Existing Radio:

A. Remove existing radio dash trim panel surrounding the radio opening. This panel is usually secured

by screws and/or snap-in clips.

B. Remove the two large screws used to secure radio to the sub-dashboard.

Helpful Hint: If you do not have an existing radio, you will find the radio opening is covered by a

disposable cover plate. C. Pull the radio forward to access the wiring and antenna cables plugged into the rear of the chassis. D. Un-plug the wiring harness(es) and antenna cable and remove the radio.

2. Install the New Radio:2. Install the New Radio:

2. Install the New Radio:

2. Install the New Radio:2. Install the New Radio:

A. Following the instructions included with the installation kit, secure the sleeve from the radio to the

mounting plate from the kit as explained on page 3.

B. Install the sleeve/mounting plate assembly to the sub-dashboard as per the instructions with the

installation kit. C. Replace the dashboard trimpanel. D. Following the instructions of steps 4 and 5 on page 4, carefully wire the radio and complete

installation into the mounting sleeve.

CHRYSLER-DODGE-PLYMOUTH INSTALLATIONCHRYSLER-DODGE-PLYMOUTH INSTALLATION

CHRYSLER-DODGE-PLYMOUTH INSTALLATION

AMOUNTINGKITISREQUIRED

FORTHISINSTALLATION

MOUNTINGPLATEFROMKIT (NOTINCLUDEDWITHRADIO)

SUB-DASHBOARD(RADIOAREA)

IMPORTANT

RADIO

REMOVALTOOLS

HELP!

1-800-645-7102

Monday- Friday Saturday

FACTORYDASHPANEL

MOUNTINGSLEEVE

8:30am-7:00pmEastern 9:00am-5:00pm Eastern

INSTALLRADIOUSINGSAME PROCEDUREASEXPLAINED ONPAGES 3AND4

DETACHABLE FRONTPANEL

128-5272 6of20

+ 14 hidden pages