Audiovox 128-8770, HR7010PKG User Manual

HR7010PKG

Two Custom Vehicle Headrests

with 7” LCD Monitors Touch Screen Control

and Built-in

DVD Player for Rear Entertainment

AUX AUX

OPERATION

MANUAL

128-8770

IMPORTANT

An LCD panel and/or video monitor may be installed in a motor vehicle and visible to the driver if the LCD panel or video monitor is used for vehicle information, system control, rear or side observation or navigation. If the LCD panel or video monitor is used for television reception, video or DVD play, the LCD panel or video monitor must be installed so that these features will only function when the vehicle is in “park” or when the vehicle’s parking brake is applied.

An LCD panel or video monitor used for television reception, video or DVD play that operates when the vehicle is in gear or when the parking is not applied must be installed to the rear of the driver’s seat where it will not be visible, directly or indirectly, to be operator of the motor vehicle.

Licensed under one or more of the following patents: Patent NOS. 7,245,274 , 6,899,365 and 6,678,892

HR7010PKG

The HR7010PKG contains two vehicle specific head-rests. Each has a 7” Monitor with touch screen control and built-in DVD Player. This system allows the users to either watch individual DVD’s or watch the same DVD on both monitors. Both users can also share each others program. The full function remote control can operate either unit by selecting M1 or M2 on the remote. This system is also FLO Ready and can be enhanced with the addition of a FLO TV kit (AUDIOVOX model AVXFRK1 / ADVENT model ADVFRK1.)

Quick Start Guide

1. Turn on the M1 monitor, to gain access to the DVD slot push at the top center of the screen frame, the screen will tilt forward.

2. Insert a DVD, CD or MP3 disc into the slot, disc label toward driver. Push down gently on the disc until the player pulls the disc in.

3. Use the touch screen to access the DVD mode.

4. Tilt the monitor to a comfortable viewing position (the headrest itself can be tilted forward to help achieve a comfortable viewing position).

5. Each wireless headphone has a CH A/CH B switch. Turn the volume down to its lowest setting before putting them on your head. When sitting in front of the M1 screen, use the CH A switch setting. When sitting in front of the M2 screen, use the CH B switch setting. Set the headphone to the proper channel and press the Power On/Off switch. The power indicator will light up red.

6. When the DVD menu appears, select the menu item using the cursor keys and touch the OK or play button.

7. If audio playback through the vehicle radio is preferred, use the FM transmitter On/Off button on the remote control. Set the vehicle radio to the channel selected on the M1 monitor. If interference with a local radio station occurs, set the FM modulator to one of the other 15 radio frequencies using the CHANNEL SELECT button on the remote control.

8. Turn on the M2 Monitor using the power button on the front of the screen or remote control.

9. Tilt the screen to a comfortable viewing position (the headrest itself can be tilted forward to help achieve a comfortable viewing

position).

10. Touch the screen and touch on M1 or use remote control to press SOURCE button to view program from M1 or select from the other

available sources DVD, MEMORY CARD, USB, FLO TV, AUX and MEDIA for M2 Monitor.

NOTE: To operate the M1 screen, press M1 on the remote control.

To operate the M2 screen, press M2 on the remote control.

HR7010PKG SYSTEM OVERVIEW

1) The HR7010PKG SYSTEM is a versatile headrest system. The headrests are referred to as M1 and M2 in this manual.

2) The M1 Monitor is comprised of a 7" Touch Screen TFT LCD monitor with built-in DVD player that allows the user to select from several sources (DVD, SD, USB, M2, *FLO TV (AV), AUX, MEDIA and GAME Source). The M1 monitor has a built-in infrared audio transmitter channel (CH A) for use with the two-channel wireless headphones (CH A) NOTE: When the DVD menu appears on the screen, touch the desired DVD menu selection to start the DVD playing. Refer to page for operation.

3) The M2 monitor is comprised of a 7" Touch Screen TFT LCD monitor with built-in DVD player that allows the user to select from several sources (DVD,

SD, USB, M1, *FLO TV (AV), AUX and MEDIA Source). The M2 monitor has a built-in infrared audio transmitter channel (CH B) for use with the twochannel wireless headphones (CH B).

NOTE: When the DVD menu appears on the screen, touch the desired DVD menu selection to start the DVD playing. Refer to page for 4 operation.

4) The monitors will display all of the functions with the comprehensive Graphical User Interface (GUI) and can be accessed using the touch screen.

5) The two-channel wireless headphone sets have an A-B switch that allow the users to select the audio from either the M1 (CH A) or the

M2 (CH B).

6) When using the IR remote control, the M1 Monitor will only respond to the remote control unit when the Monitor Select (M1) button on remote control is

pressed. The M2 Monitor only respond to the Remote Control unit when the Monitor Select (M2) button on remote control is pressed.

7) Optional wired headphones allow the user to listen to audio from the system.

8) The M1 and M2 Monitor will accept an audio / video input through the 1/8” jack located on the front of the unit. The audio / video device could be a video game system, video camera or other input device.

NOTE: FLO TV is an option that can be added to your HR7010PKG

system. If FLO TV is installed the Touch Screen will display the FLO TV icon. If FLO TV is not installed, there is an optional

TOUCH SCREEN GRAPHICAL USER INTERFACE (GUI)

AV Input available and the Touch Screen will display an AV icon.

AUX

WIRED HEADPHONE

AUX

USB

9) Press and release the screen at the top of the screen to release the screen for disc insertion. Pressing it again will lock the screen back in the closed position. The headrest itself can be tilted forward to help achieve a comfortable viewing position.

PUSH IN

AUX

PULL UP

WIRED HEADPHONE

USB JACK

10) Insert/Eject disc and SD Card

Insert/Eject

SD Card

Insert/Eject Disc

19 degrees

19 Degrees

HR7010PKG Touch Screen

The touch screen of the unit allows the user to start DVD play by touching PLAY MOVIE or any of the DVD menu features on the LCD screen.

Some DVD’s will not allow this function. One method is to use the remote control instead of the touch screen. The other method is to touch any of four corners of the screen to pop up the DVD menu navigation screen (below)

Use the up/down/left/right icons to select an item from the DVD menu. Use the Enter / to start DVD play.

CONTROLS AND INDICATORS DIAGRAM

Control Function Description for M1 and M2 Monitor

M1/M2 Panel Control

1. DVD disc insertion slot.

2. EJECT Button -Press this button to eject the disc.

3. SD Card Reader

4. MENU/POWER Button with Power Indicator LED.

5. Wired Headphone Jack

6. IR Transmitter LEDS.

7. USB Port

8. AUX Jack

9. IR Sensor

10. Graphical User Interface (GUI) Touch Screen

AUX

Touch Screen For HR7010PKG

Main Page

Turn on the unit by pressing the Menu / Power button located on the lower left of the unit. I) Touch the panel then touch the Home icon to display the Main Menu. The Main Menu can also be accessed by pressing the Menu / Power button on the unit’s front panel. ii) The Main Menu screens for M1 and M2 contains the following icons:

Main Menu

DVD

MEMORY

CARD

Main Menu

USB

MEMORY CARD

Insert Memory Card / SD Card into SD CARD slot. Touch the Main Menu MEMORY CARD icon to set unit’s source to SD.

USB

Insert the USB to the USB Slot. Touch the Main Menu USB icon to set the unit’s source to USB.

Touch the Main Menu M2 icon on the M1 unit to link the M1 unit to the M2 unit. The M1 unit will now receive its AV from M2.

Touch the Main Menu M1 icon on the M2 unit to link the M2 unit to

the M1 unit. The M2 unit will now receive its AV from M1.

M1 Unit

DVD, MEMORY CARD, USB, M2, FLO TV, AUX, MEDIA, GAME, PIX,

FLO TV

PIX

SCREEN

OFF

MEDIA

MUTE

GAMEAUX

FMM

SCREEN OFF, MUTE, FMM.

Main Menu

M2 Unit

DVD, MEMORY CARD,

DVD

MEMORY

CARD

USB

USB, M2, FLO TV, AUX, MEDIA, PIX,

FLO TV

MEDIA

GAMEAUX

SCREEN OFF, MUTE

SCREEN

PIX

OFF

MUTE

FMM

DVD

Touch the Main Menu DVD icon to set the source to DVD. Then insert the DVD into slot with label face toward driver. Gently push down on the disc and the disc will load automatically.

FLO TV

Touch the Main Menu FLO TV icon to access the FLO TV mode.

MUTE

VOLUME 16

Select a FLO TV channel by touching (increase) or (decrease), then touch (enter) to exit.

To increase the wired headphone volume press and to decrease the volume press . Press turn off the audio

MUTE

output.

AUX

Touch the Main Menu AUX icon to route external audio and video supplied to the unit via the cable adapter.

MEDIA

Touch the Main Menu MEDIA icon to select the MEDIA display.

GAME

Touch the Main Menu GAME icon on (for M1 only). The GAME selection is controlled by wireless game controller.

The game source can only be selected from the M1 monitor. When playing two-player games, select the GAME source on the M1 monitor and select the M1 source on the M2 monitor.

PIX

Touch the Main Menu PIX icon to gain access to the display’s picture controls. The controls available are BRIGHTNESS, CONTRAST, COLOR, TINT and RESET.

Adjustment of each control is made by touching (increase) or (decrease), then touch (enter) to exit.

The on screen DVD menu of most DVD’s can be used to select a DVD menu feature such as “Play Movie”, “Scene Select”, etc. by touching the menu item on the touch screen. For example, touching “Play Movie” in the below screen will start movie play.

Play Movie

•

Scene Select

•

Extras

Audio

•

COLOR 16

ETC

•

NOTE: A small number of DVD discs will not function like this. In

that event use the remote control to start the movie or select the different DVD options.

SCREEN OFF

Touch the Main Menu SCREEN OFF icon and the screen will shut off. Touch the screen again to turn it back on. The screen will turn back on after cycling power.

MUTE

Touch the Main Menu MUTE icon to toggle the unit’s audio between on and off.

PIX

COLOR 16

FMM

Touch the Main Menu FM MODULATOR icon (For M1 only) to gain access to the FM Modulator controls.

To turn on FM Modulator touch +or - icon, then select the FM modulator transmission frequency by touching (decrease) or (increase) [88.1MHz ~ 91.1MHz]. Touch (enter) to exit. Set the vehicle radio to the selected frequency to listen to the movie over the vehicle sound system.

OFF

FMM 88.1 MHZ

To turn off the FM Modulator function, touch OFF icon. Then touch (enter) to exit.

REMOTE CONTROL WITH WIRELESS GAME CONTROL OPERATION

Back View

DIRECTION KEYS

M1/M2

P1/P2

SELECT

RESET

START

BATTERY COVER

Battery Installation

Before attempting to operate your remote control, install the batteries as described below.

1) Turn the remote control face down. Using a finger, slide battery cover off in the direction of the arrow.

2) Install three “AAA” batteries. Make sure that proper polarity (+ or -) is observed.

3) Align the cover tabs with the remote control and slide the cover until it locks.

GAME/REMOTE SELECTOR SWITCH

The remote control will operate the M1 and M2 monitors. It is not a universal remote control and will not control equipment from other manufacturers.

WIRELESS GAME CONTROLLER FUNCTIONAL DESCRIPTION

1. Position the GAME/REMOTE selector switch to Game position.

2. Use the select button (page up & page down) to display

the games (1-32). Then use the direction buttons to move the arrow to the desired game. Press Start to select the game.

3. A Key : “A Function Key” activates the jump and optional

Weapons.

4. B Key : “ B Function Key” activates Bullet fire and attack.

5. TA Key : TURBO “A” Function Key.

6. TB Key : TURBO “B” Function Key.

7. Press Start to begin the game. Press Start again at any time

to pause the game.

8. Return the GAME/REMOTE selector switch to Remote position after use.

Two-Player Games

The game source can only be selected from the M1 monitor. When playing two-player games, select the GAME source on the M1 monitor and select the M1 source on the M2 monitor.

When playing two-player games use two remote controls and set the remote controls as follows: Player 1 (M1 Monitor) sets their remote to Game/M1/P1 Player 2 (M2 Monitor) sets their remote to Game/M1/P2.

Single player games can be played on the M2 monitor but the M1 monitor must be turned on and set to the GAME source. You cannot watch a DVD on the M1 monitor and play a game on the M2 monitor. When playing a single player game on the M2 monitor set the remote control to GAME/M1/P1 and point the remote control to the M2 monitor.

MAIN FUNCTION DESCRIPTION

POWER

M1 M2

SOURCE

FMM

ON/OFF

FMM

SELECT

IRT

ON/OFF

SUBTITLE

RETURN

AUDIO

SYSTEM

FLO

DISPLAY

A-BREPEAT

3 4

12 13 14

15 16

18 19 20

DVD

8 9

VOLUME

DAY

NIGHT

ZOOM

SETUP

EJECT

DVD

SOURCE

MUTE

MODE

PIX

* Function control is available on the unit and the remote control.

** Function control is not available on the unit and the remote control. *** FLO TV function only available when optional FLO TV module is

installed.

Note: Refer to Appendix A FLO TV for FLO TV operating instructions.

1. POWER Button*

Press this button to turn the unit ON and OFF.

2. MONITOR SELECT

M1 Button – Sets the remote control codes to enable the control of

M1 Monitor.

M2 Button – S ets the remote control codes to enable the control of

M2 Monitor.

3. FLO TV Button***

33 32

Press this button to access FLO TV mode. function keys on the remote control to correspond to FLO TV functions.

30 29 28 27

25 24

23 22

4. DVD Mode Select Button*

Press this button when playing DVDs. Switches certain function

keys on the remote control for DVD functions.

5 SOURCE Button*

For M1: Each time the button is pressed, the unit will select various sources in the following sequence: DVD > M2 > FLO TV > AUX > MEDIA > GAME. For M2: Each time the button is

Also switches the

pressed, the unit will select various sources in the following sequence: DVD > M1 > FLO TV > AUX > MEDIA

6. FMM ON/OFF Button*

Turn the wireless FM Modulator on or off.

7. FMM SELECT Button*

Select the wireless FM Modulator Frequency: (CH1 88.1MHz, CH2 88.3MHz, CH3 88.5MHz, CH4 88.7MHz, CH5 88.9MHz, CH6 89.1MHz, CH7 89.3MHz, CH8 89.5MHz, CH9

89.7MHz, CH10 89.9MHz, CH11 90.1MHz, CH12 90.3MHz, CH13 90.5MHz, CH14 90.7MHz, CH15 90.9MHz, CH16 91.1MHz).

8. IRT ON/OFF Button

Turn the Infrared Transmitter ON or OFF for IR Wireless Headphones. Pressing M1 then IRT ON/OFF will control the IR Transmitter for M1. Pressing M2 then IRT ON/OFF will control the IR Transmitter for M2.

9. SUBTITLE Button

Press to display and select the available subtitle language in DVD mode. Each time you press the button, the subtitle language changes.

Note: The type and number of subtitle languages vary from disc to disc.

10. DISPLAY Button

Press to display current disc information while the disc is playing. Press cursor (pq) buttons to select the Title or Chapter. For Title/Chapter selection use the numeric buttons to enter the desired Title Chapter selection.

11. REPEAT Button

Allows the user to repeat a selected title, chapter or track.

12. A-B Button

Allow user to repeat disc playback from point A to point B. Press A-B button On-Screen Display DVD Player Once Repeat A- Mark the beginning of the section to repeat (Set point A) Twice Repeat A-B Mark the end of the section to repeat (Set point B) 3 Times AB Off Cancel the A-B repeat function

13. RETURN Button

Press Return Once: Go to disc menu.

Press Return Twice: Go to movies playback.

14. BACK Button *** Pressing the Back Button in FLO TV mode will allows the user back one screen when in the Menu, Show Information, Show Description or

Guide. Path ends at full screen TV.

15. AUDIO Button

Press to display and select the available AUDIO languages in DVD mode. Each time you press the button, the language changes.

Note: The audio languages vary from disc to disc.

16. MENU / SETTINGS Button a.) MENU Button

Pressing the MENU button in DVD mode will cause the DVD root menu to be displayed. When using the SD card or a USB device, pressing the MENU button will cause the root menu to be displayed. Pressing the MENU button while listening to MP3 files has no effect. The operation is prohibited.

Note: Pressing the FLO TV button will disable the DVD, SD, and USB functions. To return to DVD control functions, press the DVD button.

b.) SETTINGS Button ( ) *** When in FLO TV mode the Settings button allows the user to toggle on/off the FLO TV setting menu.

17. SYSTEM MENU Button**

Press to display and select the available subtitle language in DVD mode. Each time you press the button, the subtitle language changes.

Note: The type and number of subtitle languages vary from disc to disc.

18. PAUSE ( II ) Button*

Allows the user to pause the playback. Pressing pause again or pressing the Play Button will resume normal playback.

19. PREVIOUS (9) Button*

Press to return to the previous chapter or track.

20. STOP (n) Button*

Press to stop playback.

21. SCAN BACKWARD (7) Button*

Press to search in the backward direction. Press repeatedly to change the search speed from 2, 4, 8 and 16 times the normal speed.

22. PLAY (u) Button*

Press to activate the play mode when a disc is loaded in the disc compartment.

23. SCAN FORWARD (8) Button*

Press to search in the forward direction. Press repeatedly to change the search speed from 2, 4, 8 and 16 times the normal speed.

24. NEXT (:) Button*

Press to skip to the next chapter or track.

25. OK Button (ENTER)*

Used to implement a selected setting or menu option.

26. CURSOR (pqt u)***

Use these buttons to access menu selections on the screen in DVD mode. Use these buttons for channel changing (up/down), navigating menus and selecting items in FLO TV mode.

27. MODE*/SETUP Button a.) MODE Button *

When in FLO TV mode pressing the MODE button toggles between FLO TV and an auxiliary A/V source attached to the FLO TV

module. (NOTE: your system may not have an auxiliary source).

b.) SETUP Button

When in DVD mode pressing the SETUP button will display the Setup Menu which allows the user to change the DVD player options such as OSD Language, Video, Rating etc. Refer to the settings and adjustment section for more information. Selects an audio / video device connected to the AUX Input or the optional FLO TV module. If you are in FLO TV mode and FLO TV is not

Displayed, press the MODE button to access FLO TV.

+ 36 hidden pages