Important Notice
An LCD panel and/or video monitor may be installed in a motor vehicle and visible to
the driver if the LCD panel or video monitor is used for vehicle information, system
control, rear or side observation or navigation. If the LCD panel or video monitor is used
for television reception, video or DVD play, the LCD panel or video monitor must be
installed so that these features will only function when the vehicle is in “park” or when
the vehicle’s parking brake is applied.
An LCD panel or video monitor used for television reception, video or DVD play that
operates when the vehicle is in gear or when the parking brake is not applied must be
installed to the rear of the driver’s seat where it will not be visible, directly or indirectly, to
the operator of the motor vehicle.
Warnings
Do not use any solvents or cleaning materials when cleaning the video monitor.
Do not use any abrasive cleaners, they may scratch the screen. Use only a lightly
dampened lint free cloth to wipe the screen if it is dirty.
Lock the LCD screen in the fully closed position when not in use.
Before putting on headphones always adjust the volume setting to the lowest position.
Remember to leave the dome light switch in the off or auto positions when the vehicle is
unattended, as the dome lights, if left on, can drain the vehicle’s battery. Do not put
pressure on the screen.
Caution children to avoid touching or scratching the screen, as it may become dirty or
damaged.
Television Reception
This entertainment system is designed primarily for viewing prerecorded movies or
playing video games. Television reception in a moving vehicle will be limited and in
some areas will not be possible due to weak and variable signal strength. Television
viewing in a stationary vehicle will result in an improvement, but may still be marginal
due to signal strength. The quality of the picture will not be consistent with home TV
reception. Reception may be affected by weather and distance from TV station. A weak
signal may cause the picture to roll, be snowy, or cause some color loss.
2
Congratulations on your purchase of the Audiovox VDS102T Over-head Docking Station.
The VDS102T is designed as a deluxe docking station for shuttle model DT102. This docking
station has a built-in TV tuner and a wireless FM Modulator. The VDS102T has been designed
to give you and your family many years of video entertainment in the mobile environment.
Please read the directions that follow to familiarize yourself with the product and to ensure that
you obtain the best results from your equipment.
Please note: Installation options vary, see the individual owner’s manuals for each
component in your system to obtain a full understanding of each component’s operation.
Safety Precaution
For safety reasons, when changing video media it is recommended that the vehicle is not in
motion, and that you do not allow children to unfasten seat-belts to change video media or
make any adjustments to the system. System adjustments can be accomplished using the
remote control, while seat-belts remain fastened. Enjoy your Audiovox entertainment system
but remember the safety of all passengers remains the number one priority.
3
Main Features
– Infrared Sensor
– Dome Lights with Built-in Three Position Switch
– TV Tuner (Part Number PODTVT)
– Backlit controls for Low Light operation
– Five Frequency Wireless FM Modulator
– Full Function Remote Control
– Mounting Bracket
– Trim Ring
4
Controls and Indicators Diagram
1 2
3
14
13
12
11
4
5
6
7
8
9
10
5