Audiovox 1285366 User Manual

Model APS 675

Owner’s Manual

3 Channel Remote

Car Starter

FEATURES :

 2 Three Button Programmable RF Transmitters
 Three Channel Receiver
 Anti Code Grabbing Technology
 Remote Start Safety Control Switch
 Safe Start RF Control (Double Push Of RF Transmitter)
 Selectable Automatic Timed Start Mode
 (+)and(-)Keyless Entry Outputs
 On-Board Start Relay
 On-Board Accessory Relay
 On-Board Ignition 1 Relay
 On-Board Ignition 2 Relay
 Ignition 2 Relay Selectable On or Off During Cranking
 On-Board Parking Light Relay
 Ignition 3 / Shock By-Pass / GM VAT Output (relay required)
 Tach Signal Learning Circuit
 Two(+)andTwo(-)Safety Shutdown Circuits
 Alarm By-Pass Output
 Channel 2 Output for Remote Trunk Release (relay required)
 Channel 3 Output to Control Optional Accessories
 Selectable Steady or Flashing Parking Lights for Run Indication
 Selectable 10 or 15 Minute Run Time
 Selectable 1 Sec. 3.5 Sec. Or Double Pulse Door Lock Output
 Optional Illuminated Entry Output (Relay Required)
 External Remote Start Activation Control Input

OPTIONS:

 Remote Power Window Control
 Remote Garage Door Interface
 Multiple Vehicle Capable

CAUTION! Be certain that the vehicle is outdoors before using this or any remote vehicle

starting device. A running engine produces dangerous carbon monoxide fumes
which can be harmful or fatal if prolonged exposure occurs. DO NOT remote
start the vehicle if the car is garaged.

(capable of accepting 4 transmitters)

Page 1

YOUR “ ANTI - CODE GRABBING “ TRANSMITTERS

The transmitters included with your new remote start system use the most
advanced and secure form of radio frequency transmission available on any
current automotive remote system. Some of today’s sophisticated auto thieves use
a device known as a code grabber, which will receive and store the signal from
your keychain transmitter, and re-transmit at a later time to disarm your system.
Your anti-code grabbing transmitters will change their signal every time the
button is pressed, so when a thief grabs then re-transmits your signal, the
remote system will not respond.

If your transmitter button is pressed more than fifty times while it is out of range
of the vehicle ( children playing with your keys ), the transmitter will not operate
when you return to the vehicle, and will need to be re-aligned to the receiver. To
do this, simply press button 1 two times within a one second time period. The
system will now respond to that transmitter each time a button is pressed.
For reference the transmitter packaged with your APS-675 is shown with
numbers referring to the text below.

KEYLESS ENTRY

1. To lock or unlock the doors simply press and release button 1 on
the keychain transmitter. As a keyless entry unit, for your convenience,
the parking lights will flash once when the doors are locked and twice
when the door are unlocked.

If the optional Illuminated feature has been added, when unlocking

or untill the key is turned on.

ADDITIONAL REMOTE FUNCTION (CHANNEL 2)

This system has an additional feature that can be connected to a number of
different optional accessories. Some of the more common uses for this
channel are;

To activate the optional accessory, press and hold button 2 on the keychain
transmitter for 4 seconds.

NOTE: The feature that has been added to channel 2 will always be activated using

ADDITIONAL REMOTE FUNCTION (CHANNEL 3)

This system has an additional feature that can be connected to a number of
different optional accessories. Some of the more common uses for this
channel are;

the doors the interior light will turn on and remain on for 30 seconds

 Remote Trunk Release
 Remote Window Closure
 Remote Garage Door Interface

the same transmitter button that remotely starts the vehicle. There is no way
to move the channel 2 function to a different transmitter button.

 Remote Trunk Release
 Remote Window Closure
 Remote Garage Door Interface

Page 2