AUDIOTRAK MAYA EX5 CE
On the left side of the unit, you can find the Headphone & Optical Out connector. You can use this
connector to connect MAYA EX5
CE to devices with a digital S/PDIF input using a Toslink to
Miniplug or Miniplug to Miniplug optical cable. Alternatively the same connector can be used as
output for headphones featuring the built-in headphone amplifier.
The lower side features from right to left the Digital I/O to connect MAYA EX5
CE to digital
devices using coaxial S/PDIF cables, the Analog Out section with its 6 output channels and the
Analog In section with a Line input and Mic input (featuring the built-in microphone preamp). Make
sure to connect your main analog speakers (amplified or via your HiFi system for example) to the
Front output. Use the Rear and Center/LFE outputs for surround setups.
2. Installation
System Recommendation
MAYA EX5 CE is a very high quality multimedia digital audio interface with many different
functions and not just a simple USB sound card. Even though MAYA EX5
CE does not depend very
much on the available CPU in your system, it is important that the computer meets the minimum
system requirements. A faster CPU, faster HDD and more memory is generally recommended.
Minimum System Requirements
· Intel Pentium III 700 MHz CPU or equivalent AMD CPU on a desktop computer
· Intel Pentium III 1GHz CPU or equivalent AMD CPU on a notebook computer
· Windows 2000, XP operating system
· one available USB port (USB 1.1 and USB 2.0 are supported)
· 128MB of RAM on a desktop computer
· 256MB of RAM on a notebook computer
· CD-ROM or DVD-ROM
Hardware Installation
MAYA EX5
CE is simply connected to an available USB port of your computer. A separate power
supply is not required, as MAYA EX5
CE is a USB powered device. Simply install the hardware by
plugging it into your computer (switched on).
USB port of a computer
You will see one of the LEDs turning on inside the MAYA EX5 CE case. After connecting the
device to your computer, you should connect the MAYA EX5
CE’s in- and outputs to your external
devices such as headphones, speakers or mixers.
5