Audio-Technica ES954 User Manual
ES954
Hanging Microphone Array
ES954 Hanging Microphone Array
1
2
3
LED
4
• Ideal, cost-e ective solution for huddle rooms, conference
rooms and other meeting spaces
• Quad-capsule steerable microphone array designed for use with
the ATDM-0604 Digital SmartMixer® and other compatible mixers
• When controlled by a compatible mixer, provides 360° coverage
from a potentially limitless number (bound by mixer channel
count) of virtual hypercardioid or cardioid pickups that can be
steered in 30° increments to clearly capture every person
speaking in a room
• Mixer-controlled tilt function provides a vertical steering option
to accommodate ceilings of di erent heights
• Includes Plenum-rated AT8554 Ceiling Mount with RJ45
connectors and push-type wire terminals for simple,
secure installation
• Integral, logic-controlled red/green LED ring provides clear
indication of mute status
• High-output design with low self-noise delivers strong,
natural-sounding vocal reproduction
• Low-refl ective white fi nish matches ceiling tiles in most
environments
• Includes two 46 cm (18") breakout cables: RJ45 (female) to
three 3-pin Phoenix (female); RJ45 (female) to 3-pin Phoenix
(female) and unterminated LED conductors
Ceiling Tile
AT8554
Included
Seismic Cable
Included
Basic
Installation
Standard
RJ45 Cables
Breakout Cables
Included
• Permanently attached 1.2 m (4') cable with locking grommet
enables quick microphone height adjustment
• Included seismic cable secures the AT8554 Ceiling Mount to
a drop ceiling grid
• UniGuard® RFI-shielding technology o ers outstanding
rejection of radio frequency interference (RFI)
• Requires 11V to 52V DC phantom power
Includes
ES954 AT8554 Breakout Cables Accessories
Audio-Technica Ltd (UK)
Technica House, Unit 5, Millennium Way
Leeds, LS11 5AL, United Kingdom
Tel: +44 (0) 113 277 1441
info@audio-technica.co.uk
ES954
Included
Specifi cations
Elements Fixed-charge back plate, permanently polarized condenser
Polar pattern Omnidirectional (O)/Figure-of-eight (L/R/Z)
Frequency response 20 to 16,000 Hz
Open circuit sensitivity O/L/R: -36 dB (15.85mV) (0 dB=1V/Pa,1 kHz);
Z: -38.5 dB (11.9 mV) (0 dB=1 V/Pa,1 kHz)
Impedance 100 ohms
Maximum input sound level O/L/R: 132.5 dB SPL (1 kHz at 1% THD)
Z: 135 dB SPL (1 kHz at 1% THD)
Signal-to-noise ratio O/L/R: 66.5 dB (1 kHz at 1 Pa, A-weighted)
Z: 64 dB (1 kHz at 1 Pa, A-weighted)
Phantom power requirements 11-52V DC, 23.2 mA (both channels total)
Weight Mic: 160 g (5.6 oz); Ceiling Mount (AT8554): 420 g (14.8 oz)
Dimensions Mic: Max. body dia.: 61.6 mm (2.43"); Height: 111.8 mm (4.40")
Ceiling Mount (AT8554): 36.6 mm H (1.44") × 106.0 mm (4.17") W
× 106.0 mm (4.17") D
Output connector Euroblock connector
1 Pascal = 10 dynes/cm2 = 10 microbars = 94 dB SPL
For product improvement, the product is subject to modifi cation without notice.
MIC 1 MIC 2 MIC 3 MIC 4 LED
ATDM-0604 Digital SmartMixer®
or other compatible mixer
Loading...