wireless
EP1 In-Ear Dynamic Headphones
Écouteurs dynamiques « in-ear » EP1
Auriculares dinámicos de tapón EP1
wireless
wireless
wireless
wireless
2
EP1 In-Ear Dynamic Headphones
WARNING!
Please read these warnings before using your headphones. To
ensure safety, observe all warnings while using this equipment.
• Do not disassemble or attempt to repair headphones.
• To prevent damage to your eardrums, never use the
headphones at excessive volume levels. Listening to
loud sounds for an extended period may cause
temporary or permanent hearing loss.
• Do not store the headphones in direct sunlight, near
heating devices or in hot, humid or dusty places.
• Do not subject the headphones to strong impact.
• Do not allow the headphones to become wet.
About EP1 In-Ear Dynamic Headphones
Thank you for purchasing Audio-Technica EP1 In-Ear
Dynamic Headphones.
Read these instructions before using the headphones,
and keep the manual for future reference.
Audio-Technica’s EP1 In-Ear Dynamic Headphones come
with three sizes of silicone flexible earpieces and universalfit foam tips for custom fit, increased isolation and longwearing listening comfort.
EP1 Features
• Clear audio — Delivers a clean, articulate audio signal
• Ultra-compact design — In-ear design is ideal for
on-stage use
• Sound isolation — In-ear design forms an acoustic seal
for isolation from background noise
• Customized comfort — Soft interchangeable earpieces
(small, medium & large sizes, plus ear-conforming foam
tips) provide a truly custom fit
•
Soft pouch — Protective pouch provides convenient
storage
• Adjustable Y cable — 1.2 m (3.9') Y cable includes an
adjustable sleeve for a secure, comfortable fit
• Right-angle mini-plug — Gold-plated stereo mini-plug
provides exceptional corrosion resistance, superb
conductivity, secure connection
•
Neodymium magnets — rare-earth magnets deliver a
powerful signal
Included Accessories
• Soft pouch
• Replaceable earpieces (Small, Medium and Large)
• Ear-conforming foam tips
EN
3
Selecting your replaceable earpieces and checking fit
of the earphones
Medium-sized silicone earpieces are attached to the
earphones at shipment. If these do not fit your ears, replace
them with the Small or the Large earpieces. It is important
to have the correct and comfortable fit; an incorrect fit will
degrade the audio function of your headphones. Do not push
beyond the ear canal opening.
Using your in-ear headphones
1. Connect the headphone cable to the headphone jack of
your audio device.
2. Wear the left earphone (marked L) in your left ear, and
the right earphone (marked R) in your right ear. Insert
the earpiece on the earphone into your ear so it fits
snugly and comfortably. If fit is not correct, please see
Selecting your replaceable earpieces above.
Warning: Do not push the earphone sleeve beyond the
ear canal opening.
3. Wear the headphones with the Y cable toward the front
or back. Use the adjustable sleeve to tighten the cable.
After using your in-ear headphones
• After you have finished using your in-ear headphones,
store them in included protective carrying case.
• To clean the earphones, wipe with a clean, soft cloth.
Do not use solvents.
• For periodic cleaning of earpieces, remove from
earphones and wash with warm water. Make certain
earpieces are completely dry before reinstalling on
earphones. Check for any obstructions.
• Earpieces will wear over time. Replacement earpieces
are available from Audio-Technica dealers.
Specifications
*
Type Dynamic
Driver Diameter 11.5 mm
Frequency Response 60 –12,000 Hz
Sensitivity 108 dB/mW
Impedance 18 ohms
Weight (without cable) 5 g (0.18 oz)
Cable 1.2 m (3.9'), Y-type
Connector 3.5 mm TRS stereo
Accessories Soft pouch; interchangeable
earpieces (S,M,L); earconforming foam tips
*
Specifications are subject to change without notice.
4. Turn on your audio device. (Volume should be set at a
low level at first; adjust as necessary on audio device.)
Check to make certain the headphones fit correctly and
that there is a good seal between the ear canal and the
silicone earpiece on your earphone; see
Selecting your
replaceable earpieces above.