Audio-Technica ATW-A410P Users Manual

ATW-A410P

User Manual

UHF Powered Wideband Antenna

Introduction

Thank you for purchasing this Audio-Technica product. Before using the product, please read through the Quick Start Guide, as well as this user
manual when necessary, to ensure that you use the product correctly.

Safety precautions

Although this product was designed to be used safely, failing to use it correctly may result in an accident. To ensure safety, observe all warnings and
cautions while using the product.

• Disconnect the product from a device if the product begins to malfunction, producing smoke, odor, heat, unwanted noise or showing other signs
of damage. In such a case, contact your local Audio-Technica dealer.

• Do not disassemble, modify or attempt to repair the product to avoid electric shock, malfunction or fire.

• Do not subject the product to strong impact to avoid electric shock, malfunction or fire.

• Do not handle the product with wet hands to avoid electric shock or injury.

• Do not allow the product to get wet to avoid electric shock or malfunction.

• Do not put foreign matter such as combustible materials, metal, or liquid in the product.

• Do not cover the product with a cloth to avoid fire or injury by overheating.

• Keep the product out of the reach of small children or near fire to avoid an accident or a fire.

• Do not put the product in a location where it is exposed to direct sunlight, near heating devices, or in places with high temperatures, high
humidity, or high concentrations of dust to avoid electric shock, fire, malfunction, etc.

• Keep away from a fire to avoid deformation or malfunction.

• Do not use chemicals such as benzine, thinner, electrical contact cleaner, etc. to avoid deformation or malfunction.

1

Notes on use

• Be sure to read the connected device’s user manual before use.

• Turn off the power of the connected device before connecting or disconnecting cables.

• If you use the product near a TV or radio antenna, you may hear unwanted noise in the television or radio. If this occurs, move the product away
from the device.

Notes on installation

• Install the product where there is a clear line of sight from the
transmitter. Do not install the product behind interior decoration
elements.

• Audio-Technica accepts no responsibility for accidents such as
falling that come as a result of improper installation.

• Install the product in a place where the antenna will not be
damaged by moving people or equipment.

• Do not install the product where unwanted noise is received from
devices such as light dimmers, fluorescent lighting, LED lighting,
large motors, office automation equipment such as computers, or
electronic musical instruments.

• Do not install the product close to devices such as wireless LAN
routers. This may result in unwanted noise.

• For best RF performance of the connected diversity receiver, install
the antennas at least 1 m (3.3') apart.

Install the product where
there is a clear line of
sight from the transmitter

Space antennas at least

1 m (3.3') apart

Keep the product away from
windows (install the product
where it does not pick up
unwanted radio noise)

Install the product in a place
where the product is not disturbed
by people or equipment

Maintenance

• If the product becomes dirty or covered with dust, be sure to turn off the connected device before wiping the product off with a dry and soft cloth.

• Do not use benzine, thinner or electrical contact cleaner, etc. They may deform or otherwise damage the product, or cause operational failure.

2

Part names and functions

10 0 dB

❷❶ ❶❹ ❺ ❻❸

+12+6-

❶ Mounting bracket removal button
❷ Gain indicator
❸ Gain selector switch
❹ BNC output terminal
❺ Cable tie mounting hole

You can secure the main unit and bracket with a cable tie (sold separately).

❻ Mounting bracket

3