Page 1
ATW-T210a
Frequency-agile UHF UniPak® Body-pack Transmitter
Features
•
Rugged housing with a reversible clothing clip
•
Recessed locking HRS-type microphone input connector
•
LED “on” indicator
•
10 compatible user-switchable channels in one of two UHF
frequency ranges
•
Microphone or line input with DC bias voltage
•
Internal channel selector switch
•
Internal trim controls for mic and line inputs
•
Integrated two-position top-mounted power/mute switch
•
Digital Tone Lock™ to identify the wireless transmitter to the receiver
•
Operates on two AA batteries
•
Field replaceable whip antenna
Description
The ATW-T210a wireless UniPak
high-impedance input connections along with a DC bias voltage connection for use with dynamic and electret condenser microphones as well as
Hi-Z instrument pickups. Separate input trim controls are provided for
each input along with a ten-position channel selector switch. All adjustment controls are hidden behind the transmitter’s battery door and an
adjustment tool is provided with the transmitter. A locking 4-pin HRS-type
input connector is provided for both inputs. The connector is recessed to
protect the connection and input cable. Sophisticated Tone Lock
squelch eliminates the need for a separate mute button allowing the
two-position, positive-action mechanical switch to function for both
power and mute. The switch is located on the top of the transmitter
for easy access and can be operated without looking at the transmitter.
An RF power select switch offers high and low settings. A battery
condition indicator shows that the batteries are good. The transmitter
operates on two standard AA batteries providing over eight hours of
continuous operation. Constructed of rugged high-impact materials, the
transmitter incorporates a latching captive battery door, eld replaceable
antenna and reversible belt clip.
Architect’s and Engineer’s Specications
The frequency-agile FM wireless body-pack transmitter shall be part of
a wireless system offered in two UHF bands, 656.125– 678.500 and
487.125– 506.500 MHz. The body-pack transmitter shall have inputs for
microphone and line level inputs. It shall provide DC voltage to power
microphones requiring DC bias. The body-pack transmitter shall have a
reversible clip allowing for up or down cable entry. A two-position
positive-action mechanical power/mute switch operable without looking at
the transmitter shall be provided. Transmitters using separate mute and
power buttons shall be unacceptable. The transmitter shall have a recessed
input connector and illuminated indicator to indicate battery condition. Ten
selectable channels shall be available. Channel selection shall be via a
recessed rotary selector and the proper tool shall be included with the
®
body-pack transmitter has both low- and
™
tone
2000 series wireless systems
transmitter. The device shall have an LED indicator when it is turned on.
There shall be individual trim adjustments on each input. The transmitter shall
include a Tone Lock™ to identify the wireless transmitter to the wireless
receiver. This transmitter shall operate on two AA batteries and provide an
RF power select switch with high and low settings. All channel settings and
level adjustments shall be hidden behind a latching cover to prevent
unnecessary access. The transmitter shall have a removable and eld
replaceable antenna.
The FM wireless transmitter shall be an Audio-Technica ATW-T210a
or equivalent.
Specications
RF power output (50 ohms)
Spurious emissions
Input connection
Batteries
Battery life
Dimensions
Net weight
In the interest of standards development, A.T.U.S. offers full
Audio-Technica Corporation
audio-technica.com ©2014 Audio-Technica 0001-0033-02
details on its test methods to other industry
Specications are subject to change without notice.
professionals on request.
High: 30 mW, Low: 10 mW
Following federal and national regulations
Four-pin locking connector
Pin 1: GND
Pin 2: INST INPUT
PIN 3: MIC INPUT
PIN 4: DC BIAS +9V
Two 1.5V AA alkaline (not included)
or two 1.2V AA NiMH (not included)
Recharging power for NiMH batteries
(with ATW-CHG2)
U.S./Canada/Latin America: 3.2 V DC
Other world areas: 3.2 V DC
- - -
- - -
320 mA x2
230 mA x2
High: 7 hours (alkaline), Low: 9 hours (alkaline)
Depending on battery type and use pattern
66.0 mm (2.60") W x 22.5 mm (0.89") D x
92.3 mm (3.63") H
81 g (2.9 oz), without batteries
Loading...