Audio-Technica AT8615 Datasheet
AT8615
39 mm
Microphone Desk Stand
Features
• Quick-mount plug-in desk stand for 3-pin XLRM-type output
• Standard XLR-type input and output connectors
• Heavy die-cast construction
• Low-prole design with low-reectance black nish for
minimum visibility
Description
The AT8615 desk stand is a heavy-duty low-prole desk stand designed
for tabletop applications. The sturdy metal base is equipped with
three-pin XLRF- type input and three-pin XLRM-type output connector.
It is designed to t any gooseneck microphone with a three-pin XLRMtype output. The unit’s heavy die-cast construction and no slip pads help
minimize coupling of surface vibration while the low prole design with
low-reectance black nish provides minimum visibility.
accessories
Specications
Input connector 3-pin XLRF-type
Output connector 3-pin XLRM-type
Mounting Table-top with non-slip bottom pads
Dimensions 160.0 mm (6.29") maximum length, 130.0 mm (5.11")
maximum width, 39.0 mm (1.53") maximum height
In the intere st of standards develo pment, A.T.U.S. offers full deta ils on its test method s to other industry pr ofessionals on request .
Specications are subject to change without notice.
130 mm
Architect’s and Engineer’s Specications
The heavy desk stand base shall be designed to work with any dynamic
gooseneck or phantom powered condenser gooseneck microphone
with an integral 3-pin XLRM-type output connector. The unit shall offer
a 3-pin XLRF-type input connector and a 3-pin XLRM-type connector for
audio output. The unit shall offer a low-reectance black nish. The unit’s
dimensions shall be: 160.0 mm (6.29") maximum length, 130 mm (5.11")
maximum width, 39.0 mm (1.53") maximum height.
The Audio-Technica AT8615 is specied.
160 mm
130 mm
Audio-Technica U.S., Inc., 1221 Commerce Drive, Stow, Ohio 44224
Audio-Technica Limited, Old Lane, Leeds LS11 8AG England
©2010 Audio-Technica U.S., Inc. audio-technica.com 0001-0242-00
Loading...