Audio-Technica AT829cW User Manual

AT829cW

Cardioid Condenser Wireless Lavalier Microphone

Features

• Ideal for professional business presentations, public speaking, theater performances

• Clip-on lavalier mic provides crisp, full-sounding voice pickup

• Excellent gain before feedback and suppression of background noise

• Rugged design and construction for reliable performance

• Terminated for use with all Audio-Technica UniPak® wireless systems

broadcast & production microphones

Audio-Technica UniPak® body-pack transmitters.

The microphone shall include a clothing clip and a windscreen. Finish shall be low-reectance black.

The Audio-Technica AT829cW is specied.

Specications

Element

Polar pattern

Accessories furnished

In the inter est of standards devel opment, A.T.U.S.

offers full details on its test me thods to other industr y

Specication s are subject to chang e without notice.

professional s on request.

Condenser Cardioid

Cable

1.4 m (55"), terminated for use with Audio-Technica UniPak® body-pack transmitters Clothing clip; windscreen

Description

The AT829cW is a wireless clip-on/lavalier condenser microphone with a cardioid polar pattern. It is designed for professional business presentations, public speaking and theater performances.

The microphone is intended to be worn on the clothing for excellent yet unobtrusive sound pickup. The wide-range capability of the microphone ensures clean, accurate reproduction with high intelligibility for speakers, presenters and other performers.

The microphone's cardioid polar pattern provides a 120° angle of acceptance.

The microphone includes a 1.4 m (55") permanently attached miniature cable. Its free end terminates in a locking 4-pin connector for use with Audio-Technica UniPak® body-pack transmitters.

The microphone comes equipped with a clothing clip and a windscreen.

Operation

For use as a lavalier, attach the microphone about six inches below the chin. Anticipate movements that may cause the microphone to rub against or be covered by clothing, and position the microphone to avoid it.

The provided foam windscreen simply slips over the head of the microphone, effectively reducing wind noise and popping.

Avoid leaving the microphone in the open sun or in areas where temperatures exceed 110° F (43° C) for extended periods. Extremely high humidity should also be avoided.

Architect’s and Engineer’s Specications

The microphone shall be a wireless lavalier condenser. It shall have a cardioid polar pattern with a uniform 120° angle of acceptance.

The microphone shall have a 1.4 m (55") permanently attached miniature cable terminating in a locking 4-pin output connector for use with