Audio-Technica 135403940 User Manual

Wireless Essentials

Accessory Microphones and Input Cables

For all Audio-Technica UniPak®Wireless Systems

WIRELESS LAVALIER MICROPHONES

Operation: These microphones’ small size allows them to be worn as a

lavalier, or hidden in loose clothing. For normal lavalier use, attach the microphone about 6" (15 cm) below the user’s chin. Anticipate movements that may cause the microphone to rub against or be covered by clothing and position the microphone to avoid it.

AT829cW Cardioid Condenser Wireless Lavalier Microphone

Element: Condenser Polar Pattern: Cardioid Cable: 55" (1.4 m), terminated for use with

Audio-Technica UniPak transmitters

Accessories Furnished: Clothing clip; windscreen

AT831cW Cardioid Condenser Wireless Lavalier Microphone

Element: Condenser Polar Pattern: Cardioid Cable: 55" (1.4 m), terminated for use with

Audio-Technica UniPak®body-pack transmitters

Accessories Furnished: Clothing clip; windscreen

MT830cW Omni Condenser Wireless Lavalier Microphone

Element: Condenser Polar Pattern: Omnidirectional Cable: 55" (1.4 m), terminated for use with

Audio-Technica UniPak®body-pack transmitters

Accessories Furnished: Clothing clip; press-on windscreens

MT830cW-TH Omni Condenser Wireless Lavalier Microphone

Element: Condenser Polar Pattern: Omnidirectional Cable: 55" (1.4 m), terminated for use with

Audio-Technica UniPak®body-pack transmitters

Accessories Furnished: Clothing clip; press-on windscreens

body-pack

WIRELESS BOUNDARY MICROPHONE

Operation: The microphone should be placed on a flat, unobstructed

mounting surface, with the front of the microphone facing the sound source. The sound source should not be below, or higher than 60° above, the plane of the mounting surface.

U851cW Cardioid Condenser Wireless Boundary Microphone

Element: Condenser Polar Pattern: Cardioid Cable: 29.5" (0.75 m) cable terminated for

use with Audio-Technica UniPak body-pack transmitters

WIRELESS GOOSENECK

MICROPHONE

Operation: The microphone direct mounts to any5/8"-27 stand, or to the

included threaded mounting flange. Cable exit is from the bottom of the microphone. If necessary, the included pass-through adapter may be used to provide a side exit for the cable.

U857ALcW Cardioid Condenser Wireless Gooseneck Microphone

Element: Condenser Polar Pattern: Cardioid Cable: 29.5" (0.75 m) cable terminated for

use with Audio-Technica UniPak body-pack transmitters

Accessories Furnished: AT8153 two-stage foam windscreen;

AT8663 A-mount flange; AT8664 A-mount cable pass-through adapter

WIRELESS CLIP-ON INSTRUMENT

MICROPHONES

Operation: Clip directly on to instrument. The microphone is uniquely

capable of picking up high-intensity sound without distortion.

ATM350cW Cardioid Condenser Wireless Instrument Microphone

Element: Condenser Polar Pattern: Cardioid Cable: 55" (1.4 m), terminated for use with

Accessories Furnished: AT8418 UniMount

PRO 35cW Cardioid Condenser Wireless Instrument Microphone

Element: Condenser Polar Pattern: Cardioid Cable: 55" (1.4 m), terminated for use with

Accessory Furnished: AT8418 UniMount®instrument mount

Audio-Technica UniPak®body-pack transmitters

AT8468 violin mount

Audio-Technica UniPak®body-pack transmitters

instrument mount;

WIRELESS HEADWORN

ICROPHONES

Operation: After use in high-moisture applications, such as aerobics

instruction, on-stage performing, etc., remove the foam screen, wipe off the headset with a towel and permit them to air-dry. (Do not store in a closed space, such as a plastic bag, until all moisture has evaporated.)

ATM73cW: Wear the headband around the back of the head with each cushioned support pad resting on the temple in front of the ear.

ATM75cW and PRO 8HEcW: Wear the headband around the back of the head with each cushioned support pad resting on the temple in front of the ear.The assembly may be oriented so that the microphone descends from either the left or right side. The cable should remain clipped to the headband, with some slack at the boom connection.

AT889cW: Position the adjustable band around the back of the neck, placing the cushioned earpieces over each ear. Adjust the headband as necessary for a stable, comfortable fit.

ATM73cW Cardioid Condenser Wireless Headworn Microphone

Element: Condenser Polar Pattern: Cardioid Cable: 55" (1.4 m), terminated for use with

Accessories Furnished: Windscreens

ATM75cW Cardioid Condenser Wireless Headworn Microphone

Element: Condenser Polar Pattern: Cardioid Cable: 55" (1.4 m), terminated for use with

Accessory Furnished: Windscreen

PRO 8HEcW Hypercardioid Dynamic Wireless Headworn Microphone

Element: Dynamic Polar Pattern: Hypercardioid Cable: 55" (1.4 m), terminated for use with

Accessory Furnished: Windscreen

AT889cW Noise-cancelling Condenser Wireless Headworn Microphone

Element: Condenser Polar Pattern: Noise-cancelling Cable: 55" (1.4 m), terminated for use with

Accessories Furnished: Windscreen; clothing clip

Audio-Technica UniPak®body-pack transmitters

Audio-Technica UniPak transmitters

body-pack

Wireless Essentials

Accessory Microphones

and Input Cables

Audio-Technica U.S., Inc. 12 2 1 Commerce Drive, Stow, Ohio 44224

CABLES

Operation: AT-GcW, AT-GcW PRO, AT-GRcW, AT-GRcW PRO: Connects electric guitar,

bass and other instruments with a ¼" output jack to an Audio-Technica UniPak®body-pack transmitter.

XLRW: Connects a Lo-Z microphone with an XLRM-type output to an Audio-Technica UniPak®body-pack transmitter.

AT-GcW Hi-Z Instrument/Guitar Input Cable (¼" straight connector)

Length: 36" (0.9 m) Connectors: ¼" phone plug to HRS connector for

AT-GcW PRO Professional Hi-Z Instrument/Guitar Input Cable (¼" straight connector)

Length: 0.9 m (36") Connectors: Switchcraft®¼" straight connector to

AT-GRcW Hi-Z Instrument/Guitar Input Cable (¼" right-angle connector)

Length: 0.9 m (36") Connectors: ¼" right-angle overmolded connector

AT-GRcW PRO Professional Hi-Z Instrument/Guitar Input Cable (¼" right-angle connector)

Length: 0.9 m (36") Connectors: Switchcraft

XLRW Microphone Input Cable

Length: 29.5" (0.75 m) Connectors: XLRF-type connector to HRS

†

Specifications are subject to change without notice.

GUITAR AND MICROPHONE

use between instrument and Audio-Technica UniPak®transmitters

HRS-type (locking 4-pin) connector for use between instrument and Audio-Technica UniPak®body-pack wireless transmitters

to HRS-type (locking 4-pin) connector for use between instrument and Audio-Technica UniPak wireless transmitters

to HRS-type (locking 4-pin) connector for use between instrument and Audio-Technica UniPak®body-pack wireless transmitters

connector for use between Lo-Z microphone and Audio-Technica UniPak®body-pack transmitters

¼" right-angle connector

body-pack