AudioSource SYSTEM 380 User Manual

Please note: If any parts of this system are missing or damaged, do not return to the store where you purchased this system. Please call AudioSource directly at 800-HELP-115 (800-435-7115).
This system contains:
LS 300 Compact Speakers (front left, front right, back left & back right speakers);
LS 300/C Center Speaker; SW 80 Powered Subwoofer
The AudioSource System 300 Home Theater Speaker System is designed to accurately reproduce high fidelity music, including digital signals. Movies and stereo TV broadcasts will sound more realistic, putting you in the center of the action. The LS 300/C center channel speaker is video-shielded, allowing placement on top of your television. LS 300 speakers are provided for both the front and surround channels, to provide a theater-like experience.
This manual is divided into two sections. The first provides information about the LS 300 speakers and the LS 300/C center speaker. The next section concerns the SW 80 Powered Subwoofer.
Owner’s Manual
Hooking Them Up
The five-way binding posts accommodate nearly any type of connector and up to 14-gauge wire. For bare wire, press the binding post
in to reveal the eye, thread the wire into the eye, and release the spring-loaded connector. For banana plugs, simply insert the plug into the end of the connector.
When connecting the speakers, be sure to retain the correct polarity. Attach the wire from the +, red, or positive terminal on one component to the +, red, or positive terminal on the corresponding component's speaker output terminals. The –, black or negative terminals must connect to the respective –, black or negative terminals. This is easy to do by obser ving the color, stripe, or ribbing that appears on the wire.
LS 300 & LS 300/C
System 380
Home Theater Speaker Set
Speaker Placement
The center channel speaker should be placed as close as possible to the TV, preferably either directly on top of or below it. This locks the sound to the picture. Place the front speakers near the front corners of the room, either on a bookshelf or wall-mounted. Positioning near a corner enhances bass performance. Place the surround speakers either to the side of, or behind, your listening position. Typical placement is on the side walls, slightly above ear level, about two-thirds of the way back from the front of the room. This allows the surround speakers to aim directly at the listener, placing you in the middle of a five-speaker sound field.
Speaker Mounting
The LS 300 speakers include U-shaped brackets to mount the speakers to the wall. For safety, always mount these speakers on a wall that is reinforced from behind. Never mount a speaker on a wall made of unreinforced drywall or plasterboard. If you are unsure, consult a professional contractor. These speakers can also be placed on bookshelves and most types of speaker stands.
Center Speaker
+
–
Receiver
FRONT
SPEAKERS
SURROUND SPEAKERS
L
R
CLR
Left
Surround
Speaker
Right
Surround
Speaker
+
–
REARCENTER
Left
Front
Speaker
+
–
+
–
Right Front
Speaker
+
–
1. Connect the left front speaker terminals (+ & -) of your receiver to the left LS 300 front speaker.
2. Connect the right front speaker terminals (+ & -) of your receiver to the right LS 300 front speaker.
3. Connect the left surround speaker terminals (+ & -) of your receiver to the left LS 300 rear surround speaker.
4. Connect the right surround speaker terminals (+ & -) of your receiver to the right LS 300 rear surround speaker.
5. Connect the center channel speaker terminals (+ & -) of your receiver to the LS 300/C center channel speaker.
Note: If you are using an outboard Dolby
©
Surround Processor, the speaker terminals for the center and rear/surround speakers will be found
on this component, not on your receiver.
If you need more information, we offer friendly, toll-free assistance.
1.800.HELP.115
You may also fax us 24 hours a day at 650.348.8083.
Set-Up Diagram
Loading...
+ 2 hidden pages