Audio Source PSW100 Owner's Manual

PSW100 Powered Subwoofer

With Active Crossover

User Manual

Congratulations on your purchase. We trust that you will enjoy the value and quality of your AudioSource PSW100
for many years. Please take a few moments to read this manual, and retain it for your reference.

PSW100 Overview

The AudioSource PSW100 represents the very latest in affordable state of the art in subwoofer design. The highly
efficient ported enclosure houses a rugged ten-inch, mica filled polypropylene driver, a powerful one hundred watt
amplifier and an integral crossover network. This precision matched combination ensures the PSW100 will deliver
the best sound possible, under the most demanding conditions. Both crossover frequency and input level are
variable over a wide range, allowing the PSW100 to compliment a wide variety of loudspeaker systems. Line level
and speaker level inputs and speaker level outputs are provided for fast and easy connection to virtually any system.

What You Need to Know About Subwoofers

Subwoofers are designed to extend the bass response of your system beyond the limitations of most speakers. This
subwoofer is to be used in conjunction with, not in place of, your existing speakers. The low frequency sounds
reproduced by the subwoofer will radiate equally in all directions. It is not necessary to have a pair of subwoofers, as

the frequencies reproduced by a subwoofer are generally non-directional and are not easily located by the human
ear. A single subwoofer can dramatically enhance a stereo TV, a stereo system, or a full-fledged home theater.

The advent of digital recording has increased the amount of low frequency information found on recorded materials.
Subwoofers are designed to accurately reproduce the bass. Similarly, most movies intended for home viewing
feature bass response well below the musical range of traditional loudspeakers. However, this information is vital to
the impact, ambiance and believability of a scene. A subwoofer enhances those elements in your home theater.

Placement Guidelines

Prior to installing your new subwoofer, please consider the following guidelines. Placing the subwoofer near a wall or
in a corner will greatly increase the level of the information reproduced by the subwoofer. If you should find the low
frequency information to be excessive move the subwoofer farther away from a boundary area like the wall or a
corner. Conversely, if the low frequency seems thin or non-existent try moving the subwoofer closer to a boundary
area like the wall or corner. Because low frequency waves are long and need a great deal of space to be fully
reproduced, reflections of these long waves can set-up nodes of peak output and cancellation alternately. If your
listening position falls into an area of cancellation, try adjusting the placement of your subwoofer to overcome this
problem, and create a peak at your listening position. As you slowly move from one end of the room to ward the
other, these areas of peak and null performance will become evident.

The subwoofer cabinet is designed to blend in with most decors. If you decide to place anything directly atop your
subwoofer, please use great caution, as the speaker cabinet will vibrate and items placed on top may shake loose or
fall.

Using the Controls

Power Switch

The Power Switch allows the PSW100 to be turned off when there are no plans to use it over an extended period.

Level

Since your subwoofer is designed to work in conjunction with
other speakers, we have provided a Level control that will
allow you to balance the output of your subwoofer with the
rest of your system. Once set, the level control should not
require further adjustment. Begin with the level control at the
minimum position. Slowly increase the level until the
subwoofer’s output is equal to that of your other speakers
and blends in volume seamlessly. NOTE: Output Level is

relative and can be different from location to location.
Always return to the normal listening location to evaluate any
setting changes.

Crossover Frequency

The Crossover Frequency control is used to adjust the point
at which the subwoofer stops reproducing frequencies
played by the other speakers in your system. Raising the
crossover frequency increases the frequencies the PSW100
will reproduce. Lowering the crossover frequency will do the
opposite. Generally, the smaller the speakers used with the
PSW100, the higher the crossover frequency should be set.
We recommend starting at the 12 o’clock position,
approximately 100Hz and moving to the left with larger
speakers, and move to the right with smaller speakers.