AudioSource AS515 User Manual
AS515
AS515 MTM In-Wall Cinema Speaker. This product is
You will need the following tools:
4) A Pencil
where you plan to place your speakers. The AS515 speakers can
walls as a stereo pair (see fi g. 1). They are also used as a center
that retain the frame to the wall surface to swing into position.
face. You should now check for obstructions like cross bracing
your convenience. Locate and level the template, then mark
with pencil on the wall surface. If you are unsure whether there
to be mounted, cut a small hole in the center of your marked
wallboard with masking tape (see Fig. 3). This will prevent the
your walls (such as Phoenix Gold Innovative Home SS162W*).
to cross a 110V power line, place it at a right angle to the 110V
16" WALL STUD SPACING
www.audiosource.net
1
2
3
6
5
4
AS515 speaker. Likewise, the negative terminal of the amplifi er’s
AS515 speaker (Fig. 4).
To further enhance the performance of
your AS515 speakers, the wall stud cavity where you plan to
fi berglass insulation. If un-insulated, stuff the area above and
the speaker opening. If the insulation is foil or paper backed,
face the backing away from the AS515 speaker. The addition of
this insulation will help prevent the unwanted transfer of sound
frame of the speaker (Fig. 5).
With the grill removed, place the speaker in the wall opening.
the dogleg is loose from its resting position. Now turn the screw
the speaker is properly aligned and held securely to the wall
A paint shield is included in the AS515 speaker package. Place
the paint shield inside the frame to protect the speaker. You can
you desire.
When painting the grill caution should be taken to ensure that
Aiming the Tweeter
tweeter housing. Apply gentle pressure to swivel the tweeter to
the listening area you will hear a coherent and stable center
+
(+)
(-)
-
Dogleg
Fram
e
Loading...