Page 1
INSTALLATION MANUAL
TECHNOLOGY
DX
STEALTH IR HW
Used as a remote receiver and processor
SPECIFICATIONS:
Package: Includes: Stealth IR sensor (6 foot lead) and control unit.
Mounting: Adhesive backing (control unit), adhesive backing (sensor)
Remotes: Will handle almost all standard remote controllers (Note: does NOT work
with B & O equipment, which requires a proprietary confirmation talk-back
function).
Range: 110 feet indoors, 15 to 20 feet in direct sunlight.
Acceptance angle: + or - 55 degrees off center axis.
Power: 12 VDC @ 500 mA (unregulated)
Dimensions: 2.1" x 1.5" x 1.35"
Your Stealth IR HW(tm) is a compact unit that is designed to act as a remote receiver and
processor of infrared signals. This sensor will receive signals from remote controllers and send
these signals to a remote repeater.
INSTALLATION:
CAUTION: Take care to make sure that the Stealth IR HW(TM) installation is NOT IN THE
LINE OF SIGHT OR REFLECTION with the repeater. If radiation from the repeater is picked up
by this sensor, a feedback situation is created which will result in instability and unreliable
operation. Undesirable reflection can occur off of light colored walls, windows, mirrors, and even
shiny wood finishes! Follow the wiring diagram carefully(see back of this page for wiring
diagrams). NOTE: make all connections and check carefully prior to supplying power to the
unit! Please call if you have any questions about your installation.
TM
(Patent Pending)
Your AUDIOPLEX TECHNOLOGY(tm) Stealth IR HW(TM) is covered by a Lifetime warranty
against defects in workmanship and materials. Any defects will be remedied without charge for
labor or parts.
Damage incurred by shipping or accident is not considered to be a defect, and not covered
by this warranty. AUDIOPLEX TECHNOLOGY(tm) is not responsible for defective operation
caused by abuse or by modification or service by an unauthorized person or agency.
The unit must be properly installed and operated according to instructions for the
warranty to apply. Any necessary servicing must be done by AUDIOPLEX TECHNOLOGY(tm). The
products must be returned expences prepaid, with written authorization from the company. The
unit must be shipped with the proof of purchase and in the original carton and packing material to
avoid damage.
WARRANTY
2002 - 10/29/02
Page 2
WIRING DIAGRAMS
(NOTE: 12 volt power supply and IRBug/IRFlood are supplied with IRTarget packages only)
DX
FOR INSTALLATIONS USING AUDIOPLEX TECHNOLOGY INFRARED EQUIPMENT
STEALTH
SENSOR EYE
TALK BACK
LED INDICATOR
Using IRTarget Direct Wired to Emitter (no connector device)
MAY BE
CONNECTED
TO OTHER
IR TARGETS
IN PARALLEL
WARNING
DO NOT CUT OR EXTEND SENSOR EYE CABLE!
PLUG IN ONLY TO AUDIOPLEX STEALTH PROCESSOR
YELLOW (unused)
GRAY
BLACK
RED
WHITE (unused)
COLOR BAND
X40
X56
PLASMA
SIGNAL
GROUND (GD)
12V (B+)
ROOM 2ROOM 3
RED
BLUE
GREEN
TM
Termination Block
RED 12V (B+)
BLACK GROUND (GD)
YELLOW SIGNAL
WHITE (UNUSED)
GRAY (UNUSED)
Using IRStation / IRZ-1
IRStation (Back View)
IR-TB
V
G
S
T
V
G
S
T
TM
S
In-wall version shown, chassis version also available
IRStation (Front View)
SYS-TAT(optional)
T
S
G
V
T
S
G
V
T
S
G
V
T
SIGNAL
S
GROUND
G
12 VDC
V
T
S
G
V
T
S
G
V
ROOM 4ROOM 5ROOM 6
out to emitters
Note: Stealth eye plugs are stereo (two bands)
IRBug or IRFlood Emitters are mono (one band).
IRBug/IRFlood or
Emitter Plate
GD
WHITE STRIPED
ACTUAL SIZE
TEST
12 vdc power supply
12 VDC POWER SUPPLY
PLASMA PROOF
ACTUAL SIZE
12 vdc system status(optional)
1/8" test input connector
FOR INSTALLATIONS USING NILES
TYPE INFRARED EQUIPMENT
NILES PROCESSOR
DATA
SIGNAL WHITE
BLACK GROUND (GD)
WHITE STRIPED 12V (B+)
BLACK
RED
GRAY (UNUSED)
S S
G G
V V
YELLOW (UNUSED)
GND
+12V
FOR INSTALLATIONS USING XANTECH
TYPE INFRARED EQUIPMENT
XANTECH PROCESSOR
SIGNAL
SIGNAL GRAY
BLACK GROUND (GD)
V
WHITE STRIPED 12V (B+)
BLACK
RED
S S
G G
V
YELLOW (UNUSED)
WHITE (UNUSED)
+12V
GND
NILES is a registered trademark of Niles Audio Corporation, Inc.
XANTECH is a registered trademark of Xantech Corporation.
2003 - 1/9/03
AUDIOPLEX TECHNOLOGY
404 GWH P.O. BOX 440 MELVIN VILLAGE, N.H. 03850 1-800-257-2077 FAX: 1-603-544-8901
Loading...