Audioplex SPKCNV Installation Manual

Page 1
INSTALLATION MANUAL
TECHNOLOGY
SPKCNV
SPEAKER LEVEL TO LINE LEVEL CONVERTER
SPECIFICATIONS
Connectors: Input: Spring Clips / Output: RCA jacks Power Handling: 150 Watts RMS Frequency Response: 20Hz-20KHz +/-0.3dB Total Harmonic Distortion: Less than 0.05% Input Impedance: 100K Output Impedance: 10K Size: 3.5"W x 1.25"H x 1.125"D Weight: 0.5 lbs
The SPKCNV is designed to convert speaker level signals to line level signals in a simple, easy to use package. Prepare the speaker level wires by stripping about 1/4" of insulation from each wire end. Twist the strands tightly together so that none stick out to cause possible short circuits. Wire the unit following the diagram below. Be sure to observe polarity!
SOURCE AMPLIFIER
L+ L- R- R+
WIRING DIAGRAM
TO LINE LEVEL INPUT
Your AUDIOPLEX TECHNOLOGY SPKCNV is covered by a lifetime warranty against any defects in workmanship and materials. Any defects will be remedied without charge for labor and parts.
Damage incurred by shipping or accident is not considered to be a defect, and not covered by this warranty. AUDIOPLEX TECHNOLOGY is not responsible for defective operation caused by abuse or by modification or service by any unauthorized person or agency.
The unit must be properly installed and operated according to instructions for the warranty to apply. Any necessary servicing must be done by AUDIOPLEX TECHNOLOGY. The product must be returned expenses prepaid, with written authorization from the company. The product must be shipped with the proof of purchase and in the original carton and packing material to avoid damage.
This warranty gives you specific legal rights. You may have other rights which vary from state to state.
404 GWH P.O. BOX 440 MELVIN VILLAGE, N.H. 03850
1-800-257-2077 603-544-8601 FAX: 603-544-8901
AUDIOPLEX TECHNOLOGY
www.audioplex.com
TM
Loading...