Page 1
INSTALLATION MANUAL
TECHNOLOGY
RC-5 Interface
The RC-5 Interface allows easy integration of conventional infrared systems with stereo systems using the RC-5
infrared protocol.
INSTALLATION
With the power off to both the infrared connector block and the receiver, connect the RC-5 interface following the
wiring diagram below. Once all connections are made. Power can be restored to all the units.
WIRING DIAGRAM
FROM IR CONNECTOR BLOCK
12V POWER SUPPLY
TO RC-5 JACK ON RECEIVER
2004 - 11/23/04
WARRANTY
Your AUDIOPLEX TECHNOLOGY RC-5 Interface is covered by a Lifetime Warranty against defects in
workmanship and materials. Any defects will be remedied without charge for labor or parts.
Damage incurred by shipping or accident is not considered to be a defect, and not covered by this warranty.
AUDIOPLEX TECHNOLOGY is not responsible for defective operation caused by abuse or by modification or
service by an unauthorized person or agency.
The unit must be properly installed and operated according to instructions for the warranty to apply. Any necessary
servicing must be done by AUDIOPLEX TECHNOLOGY. The products must be returned expenses prepaid, with
written authorization from the company. The unit must be shipped with the proof of purchase and in original carton
and packing material to avoid damage.
404 GWH PO BOX 440 MELVIN VILLAGE, NH 03850 800-257-2077 FAX: 603-544-8901
AUDIOPLEX TECHNOLOGY
Loading...