USER GUIDE
10157 / 10158 / 10159 - January 2014 Version 1.0
10/12/15 inches 2-way amplified speakers with bass reflex
SR10A / SR12A / SR15A - 10/12/15 inches 2-way amplified speakers with bass reflex
Page 2
English
Sound levels
Our audio solutions deliver important sound
pressure levels (SPL) that can be harmful
to human health when exposed during long
periods. Please do not stay in close proximity
of operating speakers.
1 - Safety information
This symbol signals an important safety
precaution.
The CAUTION symbol signals a risk of product deterioration.
The WARNING symbol signals a risk to the user’s physical integrity.
The product may also be damaged.
Important safety information
Symbols used
Any maintenance procedure must be performed by a CONTEST
authorised technical service. Basic cleaning operations must thoroughly follow our safety instructions.
This product contains non-isolated electrical components. Do not
undertake any maintenance operation when it is switched on as
it may result in electric shock.
This unit is intended for indoor use only. Do not use it in a wet,
or extremely cold/hot locations. Failure to follow these safety instructions could result in fire, electric shock, injury, or damage to
this product or other property.
WARNING : This unit contains no user-serviceable parts. Do not open the
housing or attempt any maintenance by yourself. In the unlikely even your unit
may require service, please contact your nearest dealer.
In order to avoid any electrical malfunction, please do not use any multi-socket,
power cord extension or connecting system without making sure they are
perfectly isolated and present no defect.
Recycling your device
• As HITMUSIC is really involved in the environmental cause, we only commercialise clean, ROHS compliant products.
• When this product reaches its end of life, take it to a collection point designated by local authorities. The separate collection and recycling of your
product at the time of disposal will help conserve natural resources and ensure that it is recycled in a manner that protects human health and the
environment.
Risk of electrocution
To prevent the hazard of electric shocks, do not use
extension cords, multi-socket or any other connection
system without making sure metal parts completely are
out of reach.
SR10A / SR12A / SR15A - 10/12/15 inches 2-way amplified speakers with bass reflex
Page 3
English
Instructions and recommendations
12 - Cleaning precautions :
Unplug the product before attempting any cleaning
operation. This product should be cleaned only with
accessories recommended by the manufacturer.
Use a damp cloth to clean the surface. Do not
wash this product.
13 - Long periods of non use :
Disconnect the unit’s main power during long periods of
non use.
14 - Liquids or objects penetration :
Do not let any object penetrate this product as it may result
in electric shock or fire.
Never spill any liquid on this product as it may infiltrate the
electronic components and result in electric shock or fire.
15 - This product should be serviced when :
Please contact the qualified service personnel if :
- The power cord or the plug has been damaged.
- Objects have fallen or liquid has been spilled into
the appliance.
- The appliance has been exposed to rain or water.
- The product does not appear to operate normally.
- The product has been damaged.
16 - Inspection/maintenance :
Please do not attempt any inspection or
maintenance by yourself. Refer all servicing to
qualified personnel.
17 - Operating environment :
Ambient temperature and humidity: +5 - +35°C,
relative humidity must be less than 85% (when
cooling vents are not obstructed).
Do not operate this product in a non-ventilated,
very humid or warm place.
1 - Please read carefully :
We strongly recommend to read carefully and understand
the safety instructions before attempting to operate this unit.
2 - Please keep this manual :
We strongly recommend to keep this manual with the unit for
future reference.
3 - Operate carefully this product :
We strongly recommend to take into consideration every
safety instruction.
4 - Follow the instructions:
Please carefully follow each safety instruction to avoid any
physical harm or property damage.
5 - Avoid water and wet locations :
Do not use this product in rain, or near washbasins or other
wet locations.
6 - Installation :
We strongly encourage you to only use a
fixation system or support recommended by
the manufacturer or supplied with this product.
Carefully follow the installation instructions and
use the adequate tools.
Always ensure this unit is firmly fixed to avoid
vibration and slipping while operating as it may result in
physical injury.
7 - Ceiling or wall installation :
Please contact your local dealer before attempting any ceiling
or wall installation.
8 - Ventilation :
The cooling vents ensure a safe use of this product,
and avoid any overheating risk.
Do not obstruct or cover these vents as it may
result in overheating and potential physical injury or
product damage. This product should never been
operated in a closed non-ventilated area such as a flight case
or a rack, unless cooling vents are provided for the purpose .
9 - Heat exposure :
Sustained contact or proximity with warm surfaces may cause
overheating and product damages. Please keep this product
away from any heat source such as a heaters, amplifiers, hot
plates, etc...
10 - Electric power supply :
This product can only be operated according to a very specific
voltage. These information are specified on the label located
at the rear of the product.
11 - Power cords protection:
Power-supply cords should be routed so that they
are not likely to be walked on or pinched by items
placed upon or against them, paying particular
attention to cords at lugs, convenience receptacles
and the point where they exit from the fixture.
SR10A / SR12A / SR15A - 10/12/15 inches 2-way amplified speakers with bass reflex
Page 4
English
3 - Technical specifications and features
2 - Introduction
The SR10A, SR12A and SR15A speakers are the ideal solutions for live performances.
They deliver an astonishing power of 300W for the SR10A, 400W for the SR12A and 400W for the SR15A. This
powerful output is perfectly clear, warm and deep, adapted to vocal, live or recorded sessions.
They are easy to install, light and compact: that's the best you can find for nomad installations without any
compromise on quality, power or possibilities.
SR10A SR12A SR15A
Bi-amplification
250W RMS Class D for LF
50W RMS Class AB for HF
350W RMS Class D for LF
50W RMS Class AB for HF
350W RMS Class D for LF
50W RMS Class AB for HF
Total power output 300W RMS / 600W max. 400W RMS / 800W max. 400W RMS / 800W max.
Frequency response 55 Hz - 20 KHz 45 Hz - 20 KHz 40 Hz - 20 KHz
Power supply unit SMPS
H x V Dispersion 90° x 60°
Filter cutoff frequency 2,8 KHz 2,8 KHz 3,4 KHz
Sound Pressure Level 121 dB max. 123 dB max. 124 dB max.
Woofer
10''
2.5'' coil
4 Ohms - 350W AES
12''
3'' coil
4 Ohms - 350W AES
15''
3'' coil
4 Ohms - 350W AES
Tweeter
Moteur 1 pouce
8 Ohms
50 W RMS
Moteur 1,35 pouces
8 Ohms
50 W RMS
Inputs 1 COMBO XLR/JACK MIC/LINE input
Output 1 XLR line output
Settings
Main volume control
Equalizer presets : Flat, Live, DJ and Vocal
Protection Short-circuit, thermal and limiter
Housing and fixation system
2 monitor-specific angles
1 top handle and 2 side handles
2 M10 rigging points (below)
2 M10 rigging points (on top)
36mm mounting plate for a speaker stand
Dimensions 310 x 335 x 530 mm 360 x 400 x 630 mm 410 x 450 x 710 mm
Net weight 13.4 Kg 19.2 Kg 21.1 Kg
SR10A / SR12A / SR15A - 10/12/15 inches 2-way amplified speakers with bass reflex
Page 5
English
Amplification module
1
Power input socket
Allows you to connect the speaker to an electrical outlet.
Use the supplied IEC cord, and make sure the voltage
delivered by the outlet is in adequation with the value
indicated by the voltage selector before turning on the
built-in amplifier.
2
Power switch
Allows you to turn ON/OFF the built-in amplifier.
3
Voltage selector
Allows you to adapt the voltage of the amplifier to the
voltage of the electrical outlet.
4
Fuse
Protects the power supply module and the built-in
amplifier.
If need to replace the fuse, please make sure the new
fuse has exactly the same characteristics.
5
Front LED power button
Allows you to light up the Audiophony logo at the front.
6
HPF 75Hz button
Activates or deactivates the high-pass filter. When
activated, this 24dB/Octave filter supresses any
frequency below 75 Hz such as static noises, etc.
We strongly recommend to activate this filter when
combining this speaker to a subwoofer.
7
Indicator LEDs
-Power : Indicates the amplification module is ON.
-Signal : Indicates an incoming signal has been
detected.
-Clip : Indicates the incoming signal exceeds 0 dB.
In this case, please use the volume control
faders to make sure this LED only lits
occasionaly to prevent any damage to the
speaker and an optimal sound quality.
4 - Presentation
1
11 12
2
3
4
7
9
10
8
13
56
SR10A / SR12A / SR15A - 10/12/15 inches 2-way amplified speakers with bass reflex
Page 6
English
8
EQ PRESET Selector
Allows you to choose one of the 4 preset equalisation
modes:
FLAT : Default mode, the incoming signal is not
modified.
LIVE : Basses and trebles are slightly emphasized while
mediums are dimmed.
DJ : This mode strenghten low frequencies and optimise
mediums and trebles, allowing you to use the speakers
at high volumes.
VOCAL : Activates a high-pass filter to increase the
mediums. Ideal for vocal uses with a microphone, such
as conferences.
9
Volume fader
Configures the input level.
Please make sure the CLIP LED is not lit for long periods
to ensure an optimal sound quality.
10
LINE/MIC Selector
Allows you to adapt the impedance of the socket to the
type of signal detected.
When pressed, the entry level is adapted to a
microphone, when released it is adapted to a line level
signal.
11
MIC/LINE input via COMBO plug
The COMBO plug allows you to connect either a male
XLR plug or male stereo/mono Jack plug.
12
XLR LINE OUT socket
Allows you to retrieve the sum of each incoming signal
and transmit it to another amplified speaker, mixing
desk, or speaker/amplifier system.
13
Earthing system button
Allows you to connect/disconnect the ground to the
earth.
If buzzing or humming noises occur, they might be
caused by spurious signals transmitted by the earthing
system.
In this case, please disconnect it (button released).
5 - Connectors
2 = Hotspot (+)
2
3
1
3 = Coldspot (-)
1 = Ground
2 = Hotspot (+)
2
3
1
Shunt between
1 and 3 pins
1 = Ground
Tip
Tip
Signal
Sleeve
Sleeve
Ground / Shield
Ring
Ring
Coldspot (-)
Tip
Tip
Hotspot (+)
Sleeve
Sleeve
Ground / Shield
5.2 - Unbalanced
5.1 - Balanced
The COMBO sockets are
symetrical. This type of
connectors allows you to transmit
a signal over long runs of cables
without altering its quality, that
is why we recommend to use
symetrical signals.
The figures opposite describe
the balanced wiring of the XLR or
Jack 6.35 plugs.
If you do not have any source
with symetrical signal, please do
not use cables longer than 1.5 m.
The figures opposite describe the
unbalanced wiring of the XLR or
Jack 6.35 plugs.
SR10A / SR12A / SR15A - 10/12/15 inches 2-way amplified speakers with bass reflex
Page 7
English
6 - Block diagram
Note : You cain daisy-chain several SR speakers, however do not exceed 4 speakers simultaneously.
POWERED
SPEAKER
MIC
GUITARE
MIXING
DESK
Because AUDIOPHONY® takes the utmost care in its products to make sure you only get the best possible quality, our products are
subjects to modifications without prior notice. That is why technical specifications and the products physical configuration might differ
from the illustrations.
Make sure you get the latest news and updates about the AUDIOPHONY® products on www.audiophony.com
AUDIOPHONY® is a trademark of HITMUSIC S.A. - Zone Cahors sud - 46230 FONTANES - FRANCE
Loading...