Audiophony MIO-Sat440b operation manual
Power 40W RMS - 80W max.
Impedance 8 Ohms
Wall-mount speakers
• 40W, 8 Ohms speaker
• For indoor use
• Wooden enclosure - 2 ways
• Compact satellites with orientable mounting
brackets
Transducers 4" boomer + 1" compression driver
SPL max. (@1m) 116dB
Frequency response 120 Hz - 16 KHz
Materials Plywood housing
Fixation system Adjustable wall-mounting brackets supplied
Connectors Rear terminal
Dimensions (l x h x d) 150 x 225 x 170 mm
Weight 2.6 Kg
10154 - Version 1.0 / 01-2014
Package contents
The package must contain the following articles:
- 2 MIO-Sat440b speakers
- 2 supports to be screwed at the rear of your speakers
Please contact your retailer immediately if one of these articles were to be missing.
Description
Terminals
Drilled holes to fix the support to a wall
Output
Input
Caution: Please make sure
you only use low-impedance
amplifiers with a maximum
output of 40W RMS at 8 Ohms
(to power up an extra
speaker)
INPUT LINK
MIO-Sat440b
Drilled holes to attach the support to your
speaker
Dimensions
120,2
225
170
150
Because AUDIOPHONY® takes the utmost care in its products to make sure you only get the best possible quality, our products are subjects to
modifications without prior notice. That is why technical specifications and the products physical configuration might differ from the illustrations.
Make sure you get the latest news and updates about the AUDIOPHONY® products on www.audiophony.com
AUDIOPHONY® is a trademark of HITMUSIC S.A. - Zone Cahors sud - 46230 FONTANES - FRANCE
Loading...